On the Gaia Expected Harvest on Eclipsing Binaries

The space experiment Gaia, the approved cornerstone 6 ESA mission, will observe up to a billion stars in our Galaxy and obtain their astrometric positions on a micro-arcsec level, multi-band photometry as well as spectroscopic observations. It is expected that about one million Eclipsing Binaries (EBs) (with V ≤ 16 mag) will be discovered and the observing fashion will be quite similar to Hipparcos/Tycho mission operational mode. The combined astrometric, photometric and spectroscopic data will be used to compute the physical parameters of the observed EBs. From a study of a small sample of EBs, it is shown that the agreement between the fundamental stellar parameters, derived from ground-based and Hipparcos (Gaia-like) observations, is more than satisfactory and the Gaia data will be suitable to obtain accurate binary solutions.     

Optimization of Time Data Codification and Transmission Schemes: Application to Gaia

Gaia is an ambitious space observatory devoted to obtain the largest and most precise astrometric catalogue of astronomical objects from our Galaxy and beyond. On-board processing and transmission of the huge amount of data generated by the instruments is one of its several technological challenges. The measurement time tags are critical for the scientific results of the mission, so they must be measured and transmitted with the highest precision – leading to an important telemetry channel occupation. In this paper we present the optimization of time data, which has resulted in a useful software tool. We also present how time data is adapted to the packet telemetry standard. The several communication layers are illustrated and a method for coding and transmitting the relevant data is described as well. Although our work is focused on Gaia, the timing scheme and the corresponding tools can be applied to any other instrument or mission with similar operational principles.     

The gaia survey contribution to EChO target selection and characterization

The scientific output of the proposed EChO mission (in terms of spectroscopic characterization of the atmospheres of transiting extrasolar planets) will be maximized by a careful selection of targets and by a detailed characterization of the main physical parameters (such as masses and radii) of both the planets and their stellar hosts. To achieve this aim, the availability of high-quality data from other space-borne and ground-based programs will play a crucial role. Here we identify and discuss the elements of the Gaia catalogue that will be of utmost relevance for the selection and characterization of transiting planet systems to be observed by the proposed EChO mission.     

Asteroid detection at millimetric wavelengths with the PLANCK survey

The PLANCK mission, originally devised for cosmological studies, offers the opportunity to observe Solar System objects at millimetric and submillimetric wavelengths. In this paper we concentrate on the asteroids of the Main Belt, a large class of minor bodies in the Solar System. At present, more that 40 000 of these asteroids have been discovered and their detection rate is rapidly increasing. We intend to estimate the number of asteroids that can be detected during the mission and to evaluate the strength of their signal. We have rescaled the instrument sensitivities, calculated by the LFI and HFI teams for sources fixed in the sky, introducing some degradation factors to properly account for moving objects. In this way a detection threshold is derived for asteroidal detection that is related to the diameter of the asteroid and its geocentric distance. We have developed a numerical code that models the detection of asteroids in the LFI and HFI channels during the mission. This code performs a detailed integration of the orbits of the asteroids in the timespan of the mission and identifies those bodies that fall in the beams of PLANCK and their signal strength. According to our simulations, a total of 397 objects will be observed by PLANCK and an asteroidal body will be detected in some beam in 30% of the total sky scan-circles. A significant fraction (in the range from 50 to 100 objects) of the 397 asteroids will be observed with a high S/N ratio. Flux measurements of a large sample of asteroids in the submillimeter and millimeter range are relevant since they allow to analyze the thermal emission and its relation to the surface and regolith properties. Furthermore, it will be possible to check on a wider base, the two standard thermal models, based on a nonrotating or rapidly rotating sphere. Our method can also be used to separate Solar System sources from cosmological sources in the survey. This work is based on PLANCK LFI activities.     

Confirmation and characterization of neglected WDS systems using Gaia data release 3 and the virtual observatory

The aim of this article is making use of the Gaia DR3 catalogue and virtual observatory tools, to confirm and characterize 428 binary and multiple stellar systems classified as neglected (only one observation) in the Washington Double Star Catalogue (WDS). The components of the stellar systems have the same parallax and proper motion (within the errors) and are separated by less than 50,000 AU, which minimizes the number of by-chance counterparts. Effective temperatures calculated using VOSA were used to estimate stellar masses. Binding energies were calculated for 42 binary systems confirming they are physical pairs. Also we found 75 pairs with F/G- M spectral types, which are very interesting to improve the determination of the metallicity of the M star from the higher mass component.     

Standard candles from the Gaia perspective

The ESA Gaia mission will bring a new era to the domain of standard candles. Progresses in this domain will be achieved thanks to unprecedented astrometric precision, whole-sky coverage and the combination of photometric, spectrophotometric and spectroscopic measurements. The fundamental outcome of the mission will be the Gaia catalogue produced by the Gaia Data Analysis and Processing Consortium (DPAC), which will contain a variable source classification and specific properties for stars of specific variability types. We review what will be produced for Cepheids, RR Lyrae, Long Period Variable stars and eclipsing binaries.     

Processing and compression of noise-dominated data: application to the cosmic microwave background data on board the Planck satellite

We address the problem of encoding and compressing data dominated by noise. Information is decomposed into 'reference' sequences plus arrays containing noisy differences susceptible to being described by a known probability distribution. One can then give reliable estimates of the optimal compression rates by estimating the corresponding Shannon entropy. As a working example, this idea is applied to an idealized model of the cosmic microwave background (CMB) data on board the Planck satellite. Data reduction is a critical issue in space missions because the total information that can be downloaded to Earth is sometimes limited by telemetry allocation. Similar limitations might arise in remotely operated ground based telescopes. This download-rate limitation could reduce the amount of diagnostics sent on the stability of the instruments and, as a consequence, curb the final sensitivity of the scientific signal. Our proposal for Planck consists of taking differences of consecutive circles at a given sky pointing. To a good approximation, these differences could be made independent of the external signal, so that they are dominated by thermal (white) instrumental noise, which is simpler to model than the sky signal. Similar approaches can be found in other individual applications. Generic simulations and analytical predictions show that high compression rates,     can be obtained with minor or zero loss of sensitivity. Possible effects of digital distortion are also analysed. The proposed scheme is flexible and reliable enough to be optimized in relation to other critical aspects of the corresponding application. For Planck , this study constitutes an important step towards a more realistic modelling of the final sensitivity of the CMB temperature anisotropy maps.     

Simulating Gaia performances on white dwarfs

One of the most promising space missions of the European Space Agency is the astrometric satellite Gaia , which will provide very precise astrometry and multicolour photometry, for all 1.3 billion objects to   V ∼ 20  , and radial velocities with accuracies of a few km s⁻¹ for most stars brighter than   V ∼ 17  . Consequently, full homogeneous six-dimensional phase-space information for a huge number of stars will become available. Our Monte Carlo simulator has been used to estimate the number of white dwarfs potentially observable by Gaia . From this we assess the white dwarf luminosity functions that Gaia will obtain and discuss in depth the scientific returns of Gaia in the specific field of white dwarf populations. Scientifically attainable goals include, among others, a reliable determination of the age of the Galactic disc, a better knowledge of the halo of the Milky Way and the reconstruction of the star formation history of the Galactic disc. Our results also demonstrate the potential impact of a mission such as Gaia within the context of current understanding of white dwarf cooling theory.     

Astronomical network event and observation notification

Networks are becoming a key element in most current and all future, telescope and observatory projects. The ability to easily and efficiently pass observation data, alert data and instrumentation requests between distributed systems could enable science as never before. However, any effective large scale or meta‐network of astronomical resources will require a common communication format or development resources will have to be continuously dedicated to creating interpreters. The necessary elements of any astronomy communication can be easily identified, efficiently described and rigidly formatted so that both robotic and human operations can use the same data. In this paper we will explore the current state of notification, what notification requirements are essential to create a successful standard and present a standard now under development by the International Virtual Observatory Alliance (IVOA), called the VOEvent. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Space astronomy for the mid‐21st century: Robotically maintained space telescopes

The historical development of ground based astronomical telescopes leads us to expect that space‐based astronomical telescopes will need tobe operational for many decades. The exchange of scientific instruments in space will be a prerequisite for the long lasting scientific success of such missions. Operationally, the possibility to repair or replace key spacecraft components in space will be mandatory. We argue that these requirements can be fulfilled with robotic missions and see the development of the required engineering as the main challenge. Ground based operations, scientifically and technically, will require a low operational budget of the running costs. These can be achieved through enhanced autonomy of the spacecraft and mission independent concepts for the support of the software. This concept can be applied to areas where the mirror capabilities do not constrain the lifetime of the mission (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Gaia, an unprecedented observatory for Solar System dynamics

The mission Gaia by European Space Agency (ESA) is expected to fly at the end of 2011 and to perform an all-sky, magnitude-limited survey for 5 years. The probe will not use an input catalogue, and will get high accuracy astrometry and photometry for all sources of magnitude V<20. Low-resolution spectra will also be available. Moving Solar System objects will be observed as well, and their observations will be processed by a specific pipeline in order to retrieve the physical and dynamical characteristics of each object. In this contribution we will mainly focus on the impact of Gaia observations on asteroid dynamics. A dramatic improvement of orbital elements is expected, as well as the measurement of subtle effects such as those related to general relativity (GR). Gaia observations will also be supported by a network of ground-based observation sites, capable of providing follow-up for newly discovered objects that will not receive an adequate coverage from space. Specific strategies for follow-up are being planned and tested. These will need to take into account the peculiar observing geometry (large parallax effect due to the orbit of Gaia around L2) and the time constraints dictated by data processing.     

A parameter database for large scientific projects: application to the Gaia space astrometry mission

The parallel development of many aspects of a complex space science mission like Gaia, which includes numerous participants in ESA, industrial companies, and a large and active scientific collaboration throughout Europe, makes keeping track of the many design changes, instrument and operational parameters, and numerical values for the data analysis and simulations, a challenging but crucially important problem. A comprehensive, easily-accessible, up-to-date, and definitive compilation of a large range of numerical quantities is required, and the Gaia parameter database has been established to satisfy these needs. The database is a centralised repository containing, besides mathematical, physical, and astronomical constants, many satellite and subsystem design parameters. Version control provides both a ‘live’ version with the most recent parameters, as well as previous ‘reference’ versions of the full database contents. Query results are formatted by default in HTML, while an important feature is that data can also be retrieved as Java, ANSI-C, C++, Ruby, or XML structures for direct inclusion into software codes, such that all collaborating scientists can use the retrieved database parameters and values directly linked to computational routines.     

The Gaia spectrophotometric standard stars survey: II. Instrumental effects of six ground‐based observing campaigns

The Gaia SpectroPhotometric Standard Stars (SPSS) survey started in 2006, was awarded almost 450 observing nights and accumulated almost 100000 raw data frames with both photometric and spectroscopic observations. Such large observational effort requires careful, homogeneous, and automatic data reduction and quality control procedures. In this paper, we quantitatively evaluate instrumental effects that might have a significant (i.e., ≥1 %) impact on the Gaia SPSS flux calibration. The measurements involve six different instruments, monitored over the eight years of observations dedicated to the Gaia flux standards campaigns: DOLORES@TNG in La Palma, EFOSC2@NTT and ROSS@REM in La Silla, CAFOS@2.2m in Calar Alto, BFOSC@Cassini in Loiano, and LaRuca@1.5m in San Pedro Mártir. We examine and quantitatively evaluate the following effects: CCD linearity and shutter times, calibration frames stability, lamp flexures, second order contamination, light polarization, and fringing. We present methods to correct for the relevant effects which can be applied to a wide range of observational projects at similar instruments. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Assessing the Clock of Gaia: Design and Implementation of A Clock Framework Simulator

A powerful and highly configurable simulator of generic clock frameworks is presented and evaluated. This software tool was initially designed to test the reliability of clock data for the Gaia space mission. However, our application has been developed as much parameterized as possible in order to easily adapt it to any other space mission. The main goals of our software tool are to simulate the real performance of an atomic master clock, including the typical noises present in this kind of devices, and to check the reliability of the generation and distribution of clock sub-products. The latter, which are generated by other devices such as frequency multipliers and dividers, are also implemented in the simulator, as well as the corresponding transmission lines. In our simulator the clock outputs obtained from the several nodes of the framework can be displayed with the appropriate graphical tools, therefore easing the task of validating several design issues. Also, the parameters of the master clock and of all the framework devices, as well as the whole clock framework structure are entered using XML files, which can also be graphically verified. Finally, the accuracy and stability of the atomic clock which is expected to fly on-board of Gaia is assessed. We also discuss in depth the several issues regarding the time data products that Gaia will require and we characterize the most important elements.     

Constraining quasar host halo masses with the strength of nearby Lyα forest absorption

Using cosmological hydrodynamic simulations, we measure the mean transmitted flux in the Lyα forest for quasar sightlines that pass near a foreground quasar. We find that the trend of absorption with pixel quasar separation distance can be fitted using a simple power-law form including the usual correlation function parameters r ₀ and γ, so that     . From the simulations, we find the relation between r ₀ and quasar host mass, and formulate this as a way to estimate quasar host dark matter halo masses, quantifying uncertainties due to cosmological and IGM parameters, and redshift errors. With this method, we examine data for ∼9000 quasars from the Sloan Digital Sky Survey (SDSS) Data Release 5, assuming that the effect of ionizing radiation from quasars (the so-called transverse proximity effect) is unimportant (no evidence for it is seen in the data). We find that the best-fitting host halo mass for SDSS quasars with mean redshift z = 3 and absolute G -band magnitude −27.5 is  log  M /M_⊙= 12.68^+0.81_−0.67  . We also use the Lyman-Break Galaxy (LBG) and Lyα forest data of Adelberger et al. in a similar fashion to constrain the halo mass of LBGs to be  log₁₀  M /M_⊙= 11.41^+0.54_−0.59  , a factor of ∼20 lower than the bright quasars. In addition, we study the redshift distortions of the Lyα forest around quasars, using the simulations. We use the quadrupole to monopole ratio of the quasar Lyα forest correlation function as a measure of the squashing effect. We find its dependence on halo mass difficult to measure, but find that it may be useful for constraining cosmic geometry.     

Autonomous software: Myth or magic?

We discuss work by the eSTAR project which demonstrates a fully closed loop autonomous system for the follow up of possible micro‐lensing anomalies. Not only are the initial micro‐lensing detections followed up in real time, but ongoing events are prioritised and continually monitored, with the returned data being analysed automatically. If the “smart software” running the observing campaign detects a planet‐like anomaly, further follow‐up will be scheduled autonomously and other telescopes and telescope networks alerted to the possible planetary detection.We further discuss the implications of this, and how such projects can be used to build more general autonomous observing and control systems. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

基于直接成像法的多星系统观测

系外行星直接成像探测能够获取系外行星更全面的物理信息,是未来搜寻系外生命的关键技术之一.针对近期地基望远镜高对比度成像观测数据,对新发现的多星候选体进行系统展示.前期,结合地基系外行星高对比度成像设备观测能力,从已发表文献整理的Gaia星表恒星数据中筛选,得到约1000个观测目标.这些目标分布于不同的年轻星团中.近期,使用Palomar天文台Hale望远镜对上述观测目标中的42个目标在K波段开展了高对比度成像观测.这些目标恒星在可见光波段为7.5-14.2019年经过两轮观测,发现了6个多星系统候选体,这些目标在Gaia Data Release 2星表和Gaia early Data Release 3星表中难以确认是单星还是多星系统.     

Science performance of Gaia, ESA’s space-astrometry mission

Gaia is the next astrometry mission of the European Space Agency (ESA), following up on the success of the Hipparcos mission. With a focal plane containing 106 CCD detectors, Gaia will survey the entire sky and repeatedly observe the brightest 1,000 million objects, down to 20^th magnitude, during its 5-year lifetime. Gaia’s science data comprises absolute astrometry, broad-band photometry, and low-resolution spectro-photometry. Spectroscopic data with a resolving power of 11,500 will be obtained for the brightest 150 million sources, down to 17^th magnitude. The thermo-mechanical stability of the spacecraft, combined with the selection of the L2 Lissajous point of the Sun-Earth/Moon system for operations, allows stellar parallaxes to be measured with standard errors less than 10 micro-arcsecond (μas) for stars brighter than 12^th magnitude, 25 μas for stars at 15^th magnitude, and 300 μas at magnitude 20. Photometric standard errors are in the milli-magnitude regime. The spectroscopic data allows the measurement of radial velocities with errors of 15 km s⁻¹ at magnitude 17. Gaia’s primary science goal is to unravel the kinematical, dynamical, and chemical structure and evolution of the Milky Way. In addition, Gaia’s data will touch many other areas of science, e.g., stellar physics, solar-system bodies, fundamental physics, and exo-planets. The Gaia spacecraft is currently in the qualification and production phase. With a launch in 2013, the final catalogue is expected in 2021. The science community in Europe, organised in the Data Processing and Analysis Consortium (DPAC), is responsible for the processing of the data.