Extensional rise and fall of a salt diapir in the Sørvestsnaget Basin,SW Barents Sea

Regional extension which initiates and promotes the rise of salt diapirs can also make diapirs fall once the supply of salt from its source is restricted. New observations on the 3D seismic data from a salt diapir in the Sørvestsnaget Basin suggest that salt moves until the end of the Eocene and is subtle to minor readjustments afterwards, revealing a more complex kinematics that previously described. Observations such as salt horns and sags and an antithetic fault linked to the western flank of the diapir suggest that salt syn-kinematics during Middle-Late Eocene included passive rising of the salt, followed by a fall. The salt horns are remnants of a taller salt diapir that, together with the indentation of the Middle-Late Eocene syn-kinematic sediment overburden above the salt, indicate diapiric fall due to restriction of salt supply by extension. Post-kinematic readjustments did not include diapiric reactivation by tectonic compression as previously thought, but minor salt rise by shortening due to gravity gliding after the tilting of the margin during Plio-Pleistocene glacial sediment loading and differential compaction of surrounding sediments. The salt diapir appears to be presently inactive and salt supply may have been restricted from its source already since Late Eocene.     

The impact of syn- and post-extension prograding sedimentation on the development of salt-related rift basins and their inversion: Clues from analogue modelling

Various studies have demonstrated the intrinsic interrelationship between tectonics and sedimentation in salt-related rift basins during extension as well as during their inversion by compression. Here, we present seven brittle–ductile analogue models to show that the longitudinal or transverse progradation of sediment filling an elongate extensional basin has a substantial impact on the growth of diapirs and their lateral geometrical variations. We use five extensional models to reveal how these prograding systems triggered diapir growth variations, from proximal to distal areas, relative to the sedimentary source. In the models, continuous passive diapir walls developed, after a short period of reactive–active diapiric activity, during syn-extensional homogeneous deposition. In contrast, non-rectilinear diapir walls grew during longitudinal prograding sedimentation. Both longitudinal and transverse post-extensional progradation triggered well-developed passive diapirs in the proximal domains, whereas incipient reactive–active diapirs, incipient roller-like diapirs, or poorly developed diapirs were generated in the distal domains, depending on the modelled sedimentary pattern. Two models included final phases of 6% and 10% shortening associated with basin inversion by compression, respectively, to discriminate compressional from purely extensional geometries. With the applied shortening, the outward flanks of existing diapir walls steepened their dips from 8°–17° to 30°–50°. Likewise, 6% of shortening narrowed the diapir walls by 32%–72%, with their fully closing (salt welds) with 10% of shortening. We compare our results with the distribution of salt walls and minibasins of the Central High Atlas diapiric basin in Morocco, which was infilled with a longitudinally prograding mixed siliciclastic and carbonatic depositional sequence during the Early–Middle Jurassic with a minimum thicknesses of 2.5–4.0 km.     

Salt tectonics in the Cap Boujdour Area,Aaiun Basin,NW Africa

Seismic reflection data indicate the Moroccan salt basin extends to the Cap Boujdour area in the Aaiun Basin. Two salt diapir structures have been identified and several areas of collapsed strata indicate probable salt removal at the shelf edge. The presence of salt in this area correlates to the conjugate southern George's Bank Basin and the Baltimore Canyon area, and it is suggested that the salt extends southward from the known salt diapir province in the George's Bank Basin southward to the Great Stone Dome. The paucity of salt diapirs is attributed to the thick carbonate and anhydrite sequence, which was deposited soon after salt deposition that inhibited halokinesis. The presence of salt along this large segment of the Atlantic margin should increase its hydrocarbon potential with traps created around salt diapirs and provision of migration pathways from deep potential source rocks in the early Cretaceous and Jurassic strata to shallower levels.     

Salt tectonics and tear faulting in the central part of the Zagros Fold-Thrust Belt,Iran

The central part of the Zagros Fold-Thrust Belt is characterized by a series of right-lateral and left-lateral transverse tear fault systems, some of them being ornamented by salt diapirs of the Late Precambrian–Early Cambrian Hormuz evaporitic series. Many deep-seated extensional faults, mainly along N–S and few along NW–SE and NE–SW, were formed or reactivated during the Late Precambrian–Early Cambrian and generated horsts and grabens. The extensional faults controlled deposition, distribution and thickness of the Hormuz series. Salt walls and diapirs initiated by the Early Paleozoic especially along the extensional faults. Long-term halokinesis gave rise to thin sedimentary cover above the salt diapirs and aggregated considerable volume of salt into the salt stocks. They created weak zones in the sedimentary cover, located approximately above the former and inactive deep-seated extensional faults. The N–S to NNE–SSW direction of tectonic shortening during the Neogene Zagros folding was sub-parallel with the strikes of the salt walls and rows of diapirs. Variations in thickness of the Hormuz series prepared differences in the basal friction on both sides of the Precambrian–Cambrian extensional faults, which facilitated the Zagros deformation front to advance faster wherever the salt layer was thicker. Consequently, a series of tear fault systems developed along the rows of salt diapirs approximately above the Precambrian–Cambrian extensional faults. Therefore, the present surface expressions of the tear fault systems developed within the sedimentary cover during the Zagros orogeny. Although the direction of the Zagros shortening could also potentially reactivate the basement faults as strike-slip structures, subsurface data and majority of the moderate-large earthquakes do not support basement involvement. This suggests that the tear fault systems are detached on top of the Hormuz series from the deep-seated Precambrian–Cambrian extensional faults in the basement.     

Salt diapirs in the Dead Sea basin and their relationship to Quaternary extensional tectonics

Regional extension of a brittle overburden and underlying salt causes differential loading that is thought to initiate the rise of reactive diapirs below and through regions of thin overburden. We present a modern example of a large salt diapir in the Dead Sea pull-apart basin, the Lisan diapir, which we believe was formed during the Quaternary due to basin transtension and subsidence. Using newly released seismic data that are correlated to several deep wells, we determine the size of the diapir to be 13×10 km, its maximum depth 7.2 km, and its roof 125 m below the surface. From seismic stratigraphy, we infer that the diapir started rising during the early to middle Pleistocene as this section of the basin underwent rapid subsidence and significant extension of the overburden. During the middle to late Pleistocene, the diapir pierced through the extensionally thinned overburden, as indicated by rim synclines, which attest to rapid salt withdrawal from the surrounding regions. Slight positive topography above the diapir and shallow folded horizons indicate that it is still rising intermittently. The smaller Sedom diapir, exposed along the western bounding fault of the basin is presently rising and forms a 200 m-high ridge. Its initiation is explained by localized E–W extension due monoclinal draping over the edge of a rapidly subsiding basin during the early to middle Pleistocene, and its continued rise by lateral squeezing due to continued rotation of the Amazyahu diagonal fault.     

The structural styles and formation mechanism of salt structures in the Southern Precaspian Basin: Insights from seismic data and analog modeling

Using the seismic profiles and analog modeling, this paper addresses the salt structures in the M and B blocks in the Southern Precaspian Basin. The salt structural features, the formation mechanism and the controlling factors of structural deformation are investigated and discussed systematically. The interpretation of the seismic profiles shows that typical salt-related structures include salt wall, (flip-flop) salt diapir, salt roller, salt pillow (dome), salt weld, salt withdrawal minibasin and drag structure (or drape fold). In addition, model results demonstrate that the gravity spreading driven by progradation and aggradation is probably the primary factor in controlling the formation of the salt structures in the research area. Due to the differential loading driven by progradation, passive salt diapir developed near the progradational front followed by the formation of intrasalt withdrawal minibasin bounded by two salt diapirs, and secondary reactive triangle salt diapir or salt pillow might form within the intrasalt withdrawal minibasin. Model results also indicate that the pattern of the subsalt basement has important influence on the formation and evolution of salt structures. Salt diapirs primarily developed along the margin of the subsalt uplift basement, where high shear deformation was induced by differential sedimentary loading between the uplift area and the slope area.     

Comparison of evolutionary and static modeling of stresses around a salt diapir

We compare an evolutionary with a static approach for modeling stress and deformation around a salt diapir; we show that the two approaches predict different stress histories and very different strains within adjacent wall rocks. Near the base of a rising salt diapir, significantly higher shear stresses develop when the evolutionary analysis is used. In addition, the static approach is not able to capture the decrease in the hoop stress caused by the circumferential diapir expansion, nor the increase in the horizontal stress caused by the rise of the diapir. Hence, only the evolutionary approach is able to predict a sudden decrease in the fracture gradient and identify areas of borehole instability near salt. Furthermore, the evolutionary model predicts strains an order of magnitude higher than the strains within the static model. More importantly, the evolutionary model shows significant shearing in the horizontal plane as a result of radial shortening accompanied by an almost-equivalent hoop extension. The evolutionary analysis is performed with ELFEN, and the static analysis with ABAQUS. We model the sediments using a poro-elastoplastic model. Overall, our results highlight the ability of forward evolutionary modeling to capture the stress history of mudrocks close to salt diapirs, which is essential for estimating the present strength and anisotropic characteristics of these sediments.     

Contraction induced by block rotation above salt (Angolan margin)

Gravity spreading above salt at passive margins is the major mode of deformation of post-salt sediments. Whereas this process generally creates a structural zoning, extensional upslope and contractional downslope, discrepancies can however arise. For example, evidence of contractional deformation occurs in the extensional domain of the Angolan margin, to the south of the Congo delta fan. Slope-parallel seismic lines show grabens, rollover and extensional diapirs. Conversely, strike-parallel seismic lines present inversion of early grabens, apparently related to a regional-scale decrease in sedimentary thickness away from the Congo delta. As the spreading rate and the characteristic spacing of structures are direct functions of sedimentary loading, one can expect structural changes along strike due to sedimentary thickness variations. This hypothesis was tested using spreading-type experiments of brittle-ductile models lying on top of an inclined rigid substratum. The experiments simulate the progradation of a synkinematic sedimentary cover above salt, with a lateral variation of sedimentation rate. The models show that the spreading rate was higher in the thicker part. Early grabens initiated perpendicular to the slope direction. Where sedimentation rate was high, they kept their orientation during spreading and formed purely extensional synsedimentary structures: Grabens, rollovers and diapirs. Where sedimentation rate was low, blocks separated by grabens rotated in a domino-type fashion but this domain continued to extend in a slope-parallel direction. Strike slip between blocks was entirely localised within the early grabens, which inverted and formed anticlines. Structures obtained in experiments are directly comparable to those in seismic lines of the Angolan margin. In both the Angolan margin examples and the laboratory experiments, block rotation is interpreted as slope-parallel strike-slip shear zones due to lateral variations in spreading rate.     

Modeling stress evolution around a rising salt diapir

We model the evolution of a salt diapir during sedimentation and study how deposition and salt movement affect stresses close to the diapir. We model the salt as a solid visco-plastic material and the sediments as a poro-elastoplastic material, using a generalized Modified Cam Clay model. The salt flows because ongoing sedimentation increases the average density within the overburden sediments, pressurizing the salt. Stresses rotate near a salt diapir, such that the maximum principal stress is perpendicular to the contact with the salt. The minimum principal stress is in the circumferential direction, and drops near the salt. The mean stress increases near the upper parts of the diapir, leading to a porosity that is lower than predicted for uniaxial burial at the same depth. We built this axisymmetric model within the large-strain finite-element program Elfen. Our results highlight the fact that forward modeling can provide a detailed understanding of the stress history of mudrocks close to salt diapirs; such an understanding is critical for predicting stress, porosity, and pore pressure in salt systems.     

Migration of methane at the diapiric structure of the western continental margin of India — insights from seismic data

Investigations are being carried out to locate the indirect evidences of gas occurrences in the Indian Continental Margins by identifying features like pockmarks, shale diapirs, venting as well as bottom simulating reflectors (BSR). We investigate one such case of a shale diapirs. Occurrence of free gas and gas hydrates is reported using a complex trace analysis to study the variation of reflection strength and instantaneous frequency along individual reflections. A frequency analysis over the flank of the shale diapir indicates attenuation of high frequencies, possibly representing the migration of fluids (probably methane) along the fault pathways. Similarly a plot of reflection strength along an individual reflector shows the migration pathways and significant blanking.     

西非被动大陆边缘盐构造样式与成因机制

基于三维地震资料,对西非陆缘盐构造样式及分布特征进行了刻画,剖析了其形成演化机制与控制因素。西非陆缘盐上地层滑脱形成典型的薄皮构造,前缘发育挤压变形,后缘发育拉张变形,两者之间为过渡变形。拉张区发育白垩系盐筏、前盐筏、新近系盐筏等盐构造;过渡变形区以发育各种底辟构造为特征;挤压变形区主要发育侵位盐席构造。重力滑脱作用是被动陆缘盐构造发育过程中始终存在的驱动机制,重力扩展作用在大陆边缘成熟阶段作用明显,在陆缘演化早期并不突出。陆缘构造活动控制盐构造的形成,差异沉积负载作用影响着盐上地层滑移特征,而盐下底形对盐岩流动、盐上地层滑移速率及相关断裂体系的产生与沉积响应具有重要影响。     

Foldbelts with early salt withdrawal and diapirism: Physical model and examples from the northern Gulf of Mexico and the Flinders Ranges, Australia

A physical experiment shows that shortening applied to existing diapirs and minibasins produces anomalous structural styles that are unlike those of more typical foldbelts. Strong minibasins remain largely undeformed while weak diapirs localize contractional strain. Short diapirs form the cores to folds and thrusted folds, whereas tall diapirs are squeezed and often welded, commonly leading to the extrusion of allochthonous material. Key features of the model are observed in real examples. In the northern Gulf of Mexico passive margin, minibasins were originally separated by a polygonal pattern of deep salt ridges, with diapirs located at ridge intersections. Gravity spreading resulted in squeezed diapirs (and associated allochthonous salt) connected by variably oriented contractional, extensional, and strike-slip structures. In the Flinders Ranges convergent-margin foldbelt of South Australia, preexisting diapirs were squeezed, welded, and thrusted, with anticlines plunging away in multiple directions, so that minibasins are surrounded by highly variable structures. A different geometry is observed in La Popa Basin, Mexico, where squeezing of a linear salt wall produced a vertical weld with diapirs at the terminations, rather than the culmination. In all areas, foldbelt geometries are strongly influenced by the preestablished salt-minibasin architecture.     

The Moho transition zone in the Oman ophiolite-relation with wehrlites in the crust and dunites in the mantle

Field data in the Oman ophiolite show that the Moho transition zone (MTZ), which is on average 300 m thick above mantle diapirs, reduces to 50 m away from diapirs, with a sharp transition at the outskirts of the diapirs. We show here that this reduction is dominantly due to compaction of a dunitic mush present above diapirs in the MTZ, with upward injection of a wehrlitic magma in the crust, and, to a lesser extent, due to tectonic stretching. In order to explain the fraction of wehrlites injected into the crust, which is in the range of 25%, it is necessary that mantle upwelling is active, with a mantle flow velocity away from diapirs several times faster than the spreading velocity. If this velocity exceeds 5 times the ridge spreading-rate, a significant part of the MTZ may be entrained down into the mantle, flowing away from the diapir as tabular dunites.     

Slumping and shallow faulting related to the presence of salt on the Continental Slope and Rise off North Carolina

Seismic reflection profiles and long- and medium-range sidescan sonar were used to investigate a salt diapir complex and area of slope instability near the base of the Continental Slope off North Carolina. Within the area of investigation three diapirs are bounded on their upslope side by a scarp 60 m high and 50 km long. The slope above the scarp is characterized by a series of shallow rotational normal faults. The bottom below the scarp is furrowed by slide tracks, which were probably carved by large blocks that broke off the scarp face and slid downslope leaving rubble and scree lobes.Extensive slumping in this area appears to be a result of uplift and faulting associated with salt intrusion, which has fractured and oversteepened the slope leading to instability and failure. Sharply defined slide tracks suggest that slope failure above the breached diapir complex is a continuing process, in contrast to much of the surrounding slope area where few instability features were observed.     

琼东南盆地深水区流体势分析及其对天然气水合物成藏的意义

针对深水区缺乏钻井资料的情况,从可以广泛获取的叠加速度出发建立了一套计算地下流体势(气势)的方法,并以此对琼东南盆地深水区进行了实例分析,以此来获得天然气运移和水合物成藏的有益信息。盆地广泛发育断裂、底辟构造,影响着水合物的分布。BSR发育区与气体势场强度的汇聚区域有着较好的对应关系,水合物根据成因可分为两类:一类是以浅部地层生物成因气为主,另一类是以深部热成因气为主。大部分断层对应于相对低势区,反映断层的开启性,可以作为气体运移的通道,其上部发育深部热成因气为主的水合物藏。在构造隆起附近发育的底辟具有相对高气势的特征,这类底辟携带大量的深部热成因气运移至浅部,为水合物的形成提供充足的气源,在其附近剖面上常具有BSR的显示。     

Possible diapirs in the gulf of Elat,Southern Dead Sea rift

Elongate trending diapiric structures occur along faulted rifts in the Gulf of Elat. Those diapirs in the southern part of the Gulf, believed to be of salt origin were formed in the embryonic continental margin during the separation of the Nubian and Arabian plates. The diapirs farther to the north are believed to be of shale origin. These findings support other recent geological evidence suggesting that the tectonic regime in the region is obliquely extensional. Comparison with the structure of the Suez Rift indicates a jump of the northern extension of the Red Sea spreading center during the early Pliocene period.     

Gas venting that bypasses the feather edge of marine hydrate,offshore Mauritania

Methane can be released from the vast marine hydrate reservoirs that surround continents into oceans and perhaps the atmosphere. But how these pathways work within the global carbon cycle now and during a warmer world is only partially understood. Here we use 3-D seismic data to identify what we interpret to be a gas venting system that bypasses the hydrate stability zone (HSZ) offshore of Mauritania. This venting is manifested by the presence of the acoustic wipe-out (AWO) across a densely faulted succession above a salt diapir and a set of morphological features including a substantial, ∼260 m wide and ∼32 m deep, pockmark at the seabed. The base of the HSZ is marked by a bottom simulating reflector (BSR) which deflects upwards above the diapir, rather than mimicking the seabed. We use a numerical modelling to show that this deflection is caused by the underlying salt diapir. It creates a trapping geometry for gas sealed by hydrate-clogged sediment. After entering the HSZ, some methane accumulated as hydrate in the levees of a buried canyon. Venting in this locality probably reduces the flux of gas to the landward limit of feather edge of hydrate, reducing the volume of gas that would be susceptible for release during a warmer world.     

Structural and facies architecture of a diapir-related carbonate minibasin (lower and middle Jurassic,High Atlas,Morocco)

We report the structural geometry and facies architecture of a small diapir-related carbonate-dominated basin from the Jurassic rift of the Moroccan High Atlas. The Azag minibasin is a lozenge-shaped depocenter completely enclosed by tectonic boundaries that we interpret as welds after former salt anticlines or salt walls. The exposed ca. 3000 m-thick infill of the Azag minibasin is asymmetric; layers are tilted to the W defining a rollover geometry. Areally-restricted sedimentary discontinuities and wedges of growth strata near the basin margins indicate sedimentation contemporaneous with diapiric rise of a Triassic ductile layer. Facies evolution through the basin reflects local accommodation by salt withdrawal and regional events in the High Atlas rift. The early basin infill in the Sinemurian and Pliensbachian shows thickness variations indicative of low-amplitude halokinetic movements, with reduced exposed thicknesses compared to surrounding areas. The exposed Toarcian and Aalenian deposits are also reduced in thickness compared to areas outside the basin. Subsidence increased dramatically in the Bajocian-early Bathonian (?), the main phase of downbuilding, when over 2600 m of carbonates and shales accumulated at a rate > 0.5 mm/a in the depocentral area of the minibasin governed by W-directed salt expulsion. The stratigraphic units distinguished often show maximum thicknesses and deeper facies in the depocentral area, and rapidly change to shallower facies at the basin margins. The Bajocian carbonate facies assemblage of the minibasin include: reservoir facies as microbialite-coral reefs in the basin margins (formed during periods of strong diapir inflation and bathymetric relief), basin-expansive oolite bars (formed during episodes of subdued relief), and organic-rich, dark lime mudstones and shales that show source-rock characteristics. The Azag basin is a good analog for the exploration of salt-related carbonate plays in rifts and continental margins where source-rock and reservoir can form in a same minibasin.     

A submarine channel confluence classification for topographically confined slopes

High-quality 3D seismic data are used in this paper to: a) investigate the geometry of Miocene–Holocene submarine channels in confluence regions, and b) to correlate the geometry of channel confluences with the styles of topographic confinement imposed by salt structures in the Espírito Santo Basin (SE Brazil). A new method is used to analyse geomorphic parameters of three channel intervals (Units 1–3) and a modern channel. 5348 Channel Points (CP) are recorded on a sinusoidal slope interrupted by salt structures. In the upper-slope region, diapir confinement directly controls the location of channel confluences. These are characterised by a sharp increase in channel width and height at their junctions. Scale relationships show an increase in channel width of the order of 1.19 < W < 1.22 in confluence regions. Ratios of channel height between confluence and pre-confluence regions are 1.09 < H < 1.40, with ratios of <1 observed in post-confluence regions. This work proves the existence of a direct relationship between topographic confinement, confluence location and relative channel distribution. The studied submarine confluences are located in regions with high confinement created by salt diapirs. The results of this work are significant, as they show clustered distribution patterns in channels, with higher channel densities being observed in pre-confluence regions. Thus, we propose a new classification for submarine confluences based on a combined analysis of channel geometry and seismic attribute data. Confluences may be symmetric or asymmetric based on the equality of the angles the tributaries bear to the post-confluence channel. Symmetric confluences can be left or right symmetric, based on whether the dominant flow path is in the left- or right-hand tributary. Asymmetric confluences are pure asymmetric or secondary asymmetric depending on whether the dominant flow takes place along the main tributary and the post-confluence channel alignement, or along the secondary tributary which is at an angle with the main alignement.     

The influence of the Sabatayn Evaporites on the hydrocarbon prospectivity of the Eastern Shabwa Basin, Onshore Yemen

The Shabwa Basin is the northeastern extension of the Marib-Al Jawf-Shabwa system of Mesozoic grabens, located onshore in the Republic of Yemen. An evaporitic sequence with an estimated maximum depositional thickness of 300 metres was deposited during the Tithonian. It is designated the Sabatayn Formation and exerts significant control on most of the play elements in the principal hydrocarbon play systems anticipated in the northeastern part of the basin. Migration of hydrocarbons from pre-salt source rocks into intra-and post-salt reservoirs is restricted by the evaporites. Localised heat flow perturbations introduced by the salt, increase the maturity of post-salt source rocks. Post and intra-salt reservoirs are structured by listric faulting on a salt detachment, salt pillowing due to post-depositional loading, by local salt dissolution and by late folding due to gravity sliding of the post-salt section on a salt detachment. Early dissolution and reprecipitation of salt is responsible for occlusion of porosity in intra-salt clastic reservoirs.