Tectonic implication of Lower Cretaceous chromian spinel-bearing sandstones in Japan and Korea

Abstract In Japan and Korea, some Lower Cretaceous terrigenous clastic rocks yield detrital chromian spinels. These chromian spinels are divided into two groups: low-Ti and high-Ti. The Sanchu Group and the Yuno Formation in Japan have both groups, whereas the Nagashiba Formation in Japan and the Jinju Formation in Korea have only the low-Ti spinels. High-Ti spinels are thought to have originated in intraplate-type basalt. Low-Ti spinels (higher than 0.6 Cr#) were probably derived from peridotites, which are highly correlated with an arc setting derivation and possibly with a forearc setting derivation. Low-Ti spinels are seen in the Sanchu Group, the Nagashiba Formation and the Jinju Formation. Low-Ti spinels from the Yuno Formation are characterized by low Cr# (less than 0.6) and these chromian spinels appear to have been derived from oceanic mantle-type peridotite, including backarc. According to maps reconstructing the pre-Sea of Japan configuration of the Japanese Islands and the Korean Peninsula, the Korean Cretaceous basin was comparatively close to the Southwest Japan depositional basins. It is possible that these Lower Cretaceous systems were sediments mainly in the forearc and partly in the backarc regions. The peridotite might have infiltrated along major tectonic zones such as the Kurosegawa Tectonic Zone (= serpentinite melange zone) in which left lateral movement prevailed during the Early Cretaceous.     

Detrital zircon geochronology of the Cretaceous Sindong Group,Southeast Korea: Implications for depositional age and Early Cretaceous igneous activity

The Sindong Group forms the lowermost basin‐fill of the Gyeongsang Basin, the largest Cretaceous nonmarine basin located in southeastern Korea, and comprises the Nakdong, Hasandong, and Jinju Formations with decreasing age. The depositional age of the Sindong Group has not yet been determined well and the reported age ranges from the Valanginian to Albian. Detrital zircons from the Sindong Group have been subjected to U–Pb dating using laser ablation inductively coupled plasma mass spectrometry. The Sindong Group contains noticeable amounts of detrital magmatic zircons of Cretaceous age (138–106 Ma), indicative of continuous magmatic activity prior to and during deposition of the Sindong Group. The youngest detrital zircon age of three formations becomes progressively younger stratigraphically: 118 Ma for the Nakdong Formation, 109 Ma for the Hasandong Formation, and 106 Ma for the Jinju Formation. Accordingly, the depositional age of the Sindong Group ranges from the late Aptian to late Albian, which is much younger than previously thought. Lower Cretaceous magmatic activity, which supplied detrital zircons to the Sindong Group, changed its location spatially through time; it occurred in the middle and northern source areas during the early stage, and then switched to the middle to southern source areas during the middle to late stages. This study reports first the Lower Cretaceous magmatic activity from the East Asian continental margin, which results in a narrower magmatic gap (ca 20 m.y.) than previously known.     

Sandstone diagenesis of the Lower Cretaceous Sindong Group, Gyeongsang Basin, southeastern Korea: Implications for compositional and paleoenvironmental controls

Abstract The Gyeongsang Basin is a non‐marine sedimentary basin formed by extensional tectonism during the Early Cretaceous in the southeastern Korean Peninsula. The sediment fill starts with the Sindong Group distributed along the western margin of the basin. It consists of three lithostratigraphic units: the Nakdong (alluvial fan), Hasandong (fluvial) and Jinju (lacustrine) formations with decreasing age. Sindong Group sandstones are classified into four petrofacies (PF) based on their detrital composition: PF‐A consists of the lower Nakdong Formation with average Q₇₃F₁₂R₁₅; PF‐B the upper Nakdong and lower Hasandong formations with Q₆₆F₁₅R₁₈; PF‐C the middle Hasandong to middle Jinju formations with Q₄₉F₂₉R₂₂; and PF‐D the upper Jinju Formation with Q₂₆F₃₄R₄₁. The variations of detrital composition influenced the diagenetic mineral assemblage in the Sindong Group sandstones. Illite and dolomite/ankerite are important diagenetic minerals in PF‐A and PF‐B, whereas calcite and chlorite are dominant diagenetic minerals in PF‐C and PF‐D. Most of the diagenetic minerals can be divided into early and late diagenetic stages of formation. Early diagenetic calcites occur mostly in PF‐C, probably controlled by arid to semiarid climatic conditions during the sandstone deposition, no early calcite being found in PF‐A and PF‐B. Late‐stage calcites are present in all Sindong Group sandstones. The calcium ions may have been derived from shale diagenesis and dissolution of early stage calcites in the Hasandong and Jinju sandstones. Illite, the only diagenetic clay mineral in PF‐A and lower PF‐B, is inferred to be a product of kaolinite transformation during deep burial, and the former presence of kaolinite is inferred from the humid paleoclimatic conditions during the deposition of the Nakdong Formation. Chlorites in PF‐C and PF‐D are interpreted to be the products of transformation of smectitic clay or of precipitation from alkaline pore water under arid to semiarid climatic conditions. The occurrence of late‐stage diagenetic minerals largely depended on the distribution of early diagenetic minerals, which was controlled initially by the sediment composition and paleoclimate.     

Missing ophiolitic rocks along the Mae Yuam Fault as the Gondwana–Tethys divide in north-west Thailand

Abstract Thailand comprises two continental blocks: Sibumasu and Indochina. The clastic rocks of the Triassic Mae Sariang Group are distributed in the Mae Hong Son–Mae Sariang area, north‐west Thailand, which corresponds to the central part of Sibumasu. The clastic rocks yield abundant detrital chromian spinels, indicating a source of ultramafic/mafic rocks. The chemistry of the detrital chromian spinels suggests that they were derived from three different rock types: ocean‐floor peridotite, chromitite and intraplate basalt, and that ophiolitic rocks were exposed in the area, where there are no outcrops of them at present. Exposition of an ophiolitic complex denotes a suture zone or other tectonic boundary. The discovery of chromian spinels suggests that the Gondwana–Tethys divide is located along the Mae Yuam Fault zone. Both paleontological and tectonic aspects support this conclusion.     

SHRIMP U–Pb ages of detrital zircons from the Early Cretaceous Nakdong Formation,South East Korea: Timing of initiation of the Gyeongsang Basin and its provenance

To constrain the depositional age of the lowermost Nakdong Formation in the Early Cretaceous Gyeongsang Basin, SHRIMP U–Pb age determination was carried out on zircon separates. The U–Pb compositions of detrital zircons from the Nakdong Formation yield a wide range of ages from the Archean to the Cretaceous but show a marked contrast in age distribution according to the geographical locations within the basin. The provenance of the southern Nakdong Formation is dominantly the surrounding Yeongnam Massif, which is composed of Paleoproterozoic metamorphic rocks and Triassic to Jurassic plutonic rocks, whereas the central to northern Nakdong Formation records significant sediment derivation from the Okcheon Metamorphic Belt, which is distributed to the northwest, in addition to the contribution from the Yeongnam Massif. It is suggested that the maximum depositional age of the Nakdong Formation is ca 127 Ma, based on its youngest detrital zircon age population. The onset of its deposition at 127 Ma coincided with the tectonic inversion in East Asia from a compressional to an extensional geodynamic setting, probably due to the contemporaneous change in the drift direction of the Izanagi Plate and its subsequent oblique subduction.     

Serpentinite textural evolution related to tectonically controlled solid-state intrusion along the Kurosegawa Belt, northwestern Kanto Mountains, central Japan

Abstract   Serpentinite bodies in the Kurosegawa Belt are mapped along fault boundaries between the Cretaceous Sanchu Group (forearc basin-fill sediments) and the rocks of the Southern Chichibu Belt (Jurassic to Early Cretaceous accretionary prism) in the northwestern Kanto Mountains, central Japan. The serpentinites were divided into three types based on microtextures and combinations of serpentine minerals: massive, antigorite and chrysotile serpentinites. Massive serpentinite retains initial pseudomorphic textures without any deformation after serpentinization. Antigorite serpentinite exhibits shape-preferred orientation of antigorite replacing the original lizardite and/or chrysotile to form pseudomorphs. It has porphyroclasts of chromian spinel, and is characterized by ductile deformation under relatively high-pressure–temperature conditions. Chrysotile serpentinite shows evidence for overprinting of pre-existing serpentinite features under shallow, low-temperature conditions. It exhibits unidirectional development of chrysotile fibers. Foliations in antigorite and chrysotile serpentinites strike parallel to the elongate direction of the serpentinite bodies, suggesting a continuous deformation during solid-state intrusion along the fault zones after undergoing complete serpentinization at deeper levels (lower crust and upper mantle).     

Detrital chromian spinels from beach placers of Andaman Islands,India: A perspective view of petrological characteristics and variations of the Andaman ophiolite

Along the east coast of the Andaman Islands, abundant detrital chromian spinels frequently occur in black sands at the confluence of streams meeting the Andaman Sea. The mineral chemistry of these detrital chromian spinels has been used in reconstructing the evolutionary history of the Andaman ophiolite. The chromian spinels show wide variation in compositional parameters such as Cr# [= Cr/(Cr + A1) atomic ratio] (0.13–0.91), Mg# [= Mg/(Mg + Fe²⁺) atomic ratio] (0.23–0.76), and TiO₂ (<0.05–3.9 wt%). The YFe³⁺[= 100Fe³⁺/(Cr + A1 + Fe³⁺) atomic ratio] is remarkably low (usually <10 except for south Andaman). The ranges of chemical composition of chromian spinels are different in each locality. The spinel compositions show very depleted signatures over the entire island, which suggests that all massifs in the Andaman ophiolite were affected under island‐arc conditions. Although the degree of depletion varies in different parts of the island, a directional change in composition of the detrital chromian spinels from south to north is evident. Towards the north the detrital chromian spinels point to less‐depleted source rocks in contrast to relatively more depleted towards the south. The possibilities to explain this directional change are critically discussed in the context of the evolution of Andaman ophiolite.     

Palustrine calcretes of the Cretaceous Gyeongsang Supergroup, Korea: Variation and paleoenvironmental implications

Abstract Mostly siliciclastic lacustrine deposits from five stratigraphically different formations (Jinju Formation, Jindong Formation, Geoncheonri and correlative Hwasan Formations and Dadaepo Formation, in ascending order) in the Cretaceous Gyeongsang Basin, Korea, were examined for aspects of lithofacies and pedogenesis to evaluate the relative influence of geological controls on the development of palustrine calcretes (calcretes formed from palustrine deposits). The pedogenic carbonate development of palustrine deposits in the Gyeongsang Supergroup varies from formation to formation. The highest development is in the Dadaepo Formation and the second is in the Jindong Formation. The lowest development of palustrine calcretes is in the Geoncheonri and Hwasan Formations and the Jinju Formation shows intermediate development. The more negative d¹³C values and the less negative d¹⁸O values of the Dadaepo palustrine calcretes confirm greater pedogenic development in the Dadaepo Formation. That the highest development was in the Dadaepo Formation was attributed to it having the smallest lake size, indicating that lake size is critical to palustrine calcrete development in non‐carbonate lakes under semi‐arid climate. In spite of having the largest lake size, the higher development in the Jindong Formation could have resulted from its lowest lake gradient and most arid paleoclimate. The higher development of palustrine calcretes in the Late Cretaceous deposits (Jindong Formation) than the Early Cretaceous deposits (Jinju Formation) reflect overall increase in aridity throughout the period during the deposition of the Gyeongsang Supergroup. Consequently, the diverse development of the palustrine calcretes in the Gyeongsang Supergroup indicates that the lacustrine settings varied in time and space throughout the evolution of the Cretaceous Gyeongsang Basin. Such variation in palustrine calcrete development according to the change in paleoenvironments may provide a basis to interpret the relative paleoenvironmental condition of lacustrine deposits including paleoclimate, lake size and gradient.     

Slab-fluid metasomatism in the Early Paleozoic forearc mantle deduced from the Motai serpentinites,South Kitakami Belt,northeast Japan

The present study examines the petrology and geochemistry of the Early Paleozoic Motai serpentinites, the South Kitakami Belt, northeast Japan, to reveal the subduction processes and tectonics in the convergent margin of the Early Paleozoic proto-East Asian continent. Protoliths of the serpentinites are estimated to be harzburgite to dunite based on the observed amounts of bastite (orthopyroxene pseudomorph). Relic chromian spinel Cr# [=Cr/(Cr + Al)] increases with decreasing amount of bastite. The compositional range of chromian spinel is similar to that found in the Mariana forearc serpentinites. This fact suggests that the protoliths of the serpentinites are depleted mantle peridotites developed beneath the forearc regions of a subduction zone. The Motai serpentinites are divided into two types, namely, Types 1 and 2 serpentinites; the former are characterized by fine-grained antigorite and lack of olivine, and the latter have coarse-grained antigorite and inclusion-rich olivine. Ca-amphibole occurs as isolated crystals or vein-like aggregates in the Type 1 serpentinites and as needle-shaped minerals in the Type 2 serpentinites. Ca-amphibole of the Type 1 serpentinites is more enriched in LILEs and LREEs, suggesting the influence of hydrous fluids derived from slabs. By contrast, the mineral assemblage, mineral chemistry, and field distribution of the Type 2 serpentinites reflect the thermal effect of contact metamorphism by Cretaceous granite. The Ca-amphibole of the Type 1 serpentinites is different from that of the Hayachine–Miyamori Ophiolite in terms of origin; the latter was formed by the infiltration of melts produced in an Early Paleozoic arc–backarc system. Chemical characteristics of the Ca-amphibole in the ultramafic rocks in the South Kitakami Belt reflect the tectonics of an Early Paleozoic mantle wedge, and the formation of the Motai metamorphic rocks in the forearc region of the Hayachine–Miyamori subduction zone system, which occurred at the Early Paleozoic proto-East Asian continental margin.     

Geochemical and Sr–Nd–Pb isotopic investigation of Triassic granitoids and basement rocks in the northern Gyeongsang Basin, Korea: Implications for the young basement in the East Asian continental margin

Abstract We present chemical and Sr–Nd–Pb isotopic compositions of three Triassic (226–241 Ma) calc‐alkaline granitoids (the Yeongdeok granite, Yeonghae diorite and Cheongsong granodiorite) and basement rocks in the northern Gyeongsang basin, south‐eastern Korea. These plutons exhibit typical geochemical characteristics of I‐type granitoids generated in a continental magmatic arc. The Yeongdeok and Yeonghae plutons have similar initial Sr, Nd and Pb isotope ratios (⁸⁷Sr/⁸⁶Sr_initial = 0.7041 ~ 0.7050, ?_Nd(t) = 2.3 ~ 4.0, ²⁰⁶Pb/²⁰⁴Pb_feldspar = 18.22 ~ 18.34), but distinct rare earth element patterns, suggesting that the two plutons formed from partial melting of a similar source material at different depths. The Cheongsong pluton has slightly more enriched Sr–Nd–Pb isotopic compositions (⁸⁷Sr/⁸⁶Sr_initial = 0.7047 ~ 0.7065, ?_Nd(t) = 3.9 ~ 2.8, ²⁰⁶Pb/²⁰⁴Pb_feldspar = 18.24 ~ 18.37) than the other two plutons. The Nd model ages of the basement rocks (1.1 ~ 1.4 Ga) are slightly older than those of the plutons (0.6 ~ 1.0 Ga). The initial Sr and Nd isotopic ratios of the plutons can be modeled by the mixing between the mid‐oceanic ridge basalt‐like depleted mantle component and the crustal component represented by basement rocks, which is also supported by Pb isotope data. The Sr and Nd isotope data from granitoids and basement rocks suggest that the Gyeongsang basin, the Hida belt and the inner zone of south‐western Japan share relatively young basement histories (middle Proterozoic), compared with those (early Proterozoic to Archean) of the Gyeonggi and Yeongnam massifs and the Okcheon belt. The Nd isotope data of basement rocks suggest that the Hida belt might be better correlated with the basement of the Gyeongsang basin than the Gyeonggi massif, the Okcheon belt or the Yeongnam massif, although it may represent an older continental margin of East Asia than the Gyeongsang basin considering its slightly older Nd model ages.     

Chemical characteristics of chromian spinel in plutonic rocks: Implications for deep magma processes and discrimination of tectonic setting

We summarize chemical characteristics of chromian spinels from ultramafic to mafic plutonic rocks (lherzolites, harzburgites, dunites, wehrlites, troctolites, olivine gabbros) with regard to three tectonic settings (mid‐ocean ridge, arc, oceanic hotspot). The chemical range of spinels is distinguishable between the three settings in terms of Cr# (= Cr/(Cr + Al) atomic ratio) and Ti content. The relationships are almost parallel with those of chromian spinels in volcanic rocks, but the Ti content is slightly lower in plutonics than in volcanics at a given tectonic environment. The Cr# of spinels in plutonic rocks is highly diverse; its ranges overlap between the three settings, but extend to higher values (up to 0.8) in arc and oceanic hotspot environments. The Ti content of spinels in plutonics increases, for a given lithology, from the arc to oceanic hotspot settings by mid‐ocean ridge on average. This chemical diversity is consistent with that of erupted magmas from the three settings. If we systematically know the chemistry of chromian spinels from a series of plutonic rocks, we can estimate their tectonic environments of formation. The spinel chemistry is especially useful in dunitic rocks, in which chromian spinel is the only discriminating mineral. Applying this, discordant dunites cutting mantle peridotites were possibly precipitated from arc‐related magmas in the Oman ophiolite, and from an intraplate tholeiite in the Lizard ophiolite, Cornwall.     

SHRIMP U–Pb zircon ages of the Hida metamorphic and plutonic rocks,Japan: Implications for late Paleozoic to Mesozoic tectonics around the Korean Peninsula

A new U–Pb zircon geochronological study for the Hida metamorphic and plutonic rocks from the Tateyama area in the Hida Mountains of north central Japan is presented. The U–Pb ages of metamorphic zircon grains with inherited/detrital cores in paragneisses suggest that a metamorphic event took place at around 235–250 Ma; the cores yield ages around 275 Ma, 300 Ma, 330 Ma, 1 850 Ma, and 2 650 Ma. New age data, together with geochronological and geological context of the Hida Belt, indicate that a sedimentary protolith of the paragneisses is younger than 275 Ma and was crystallized at around 235–250 Ma. Detrital ages support a model that the Hida Belt was located in the eastern margin of the North China Craton, which provided zircon grains from Paleoproterozoic to Paleozoic rocks and also from Archean and rare Neoproterozoic rocks. Triassic regional metamorphism possibly reflects collision between the North and South China Cratons.     

Radiolaria‐dated Lower Permian clastic‐rock sequence in the Fukuji area of the Hida‐gaien terrane,central Japan,and its inter‐terrane correlation across Southwest Japan

The stratigraphy and radiolarian age of the Mizuyagadani Formation in the Fukuji area of the Hida‐gaien terrane, central Japan, represent those of Lower Permian clastic‐rock sequences of the Paleozoic non‐accretionary‐wedge terranes of Southwest Japan that formed in island arc–forearc/back‐arc basin settings. The Mizuyagadani Formation consists of calcareous clastic rocks, felsic tuff, tuffaceous sandstone, tuffaceous mudstone, sandstone, mudstone, conglomerate, and lenticular limestone. Two distinctive radiolarian faunas that are newly reported from the Lower Member correspond to the zonal faunas of the Pseudoalbaillella u‐forma morphotype I assemblage zone to the Pseudoalbaillella lomentaria range zone (Asselian to Sakmarian) and the Albaillella sinuata range zone (Kungurian). In spite of a previous interpretation that the Mizuyagadani Formation is of late Middle Permian age, it consists of Asselian to Kungurian tuffaceous clastic strata in its lower part and is conformably overlain by the Middle Permian Sorayama Formation. An inter‐terrane correlation of the Mizuyagadani Formation with Lower Permian tuffaceous clastic strata in the Kurosegawa terrane and the Nagato tectonic zone of Southwest Japan indicates the presence of an extensive Early Permian magmatic arc(s) that involved almost all of the Paleozoic non‐accretionary‐wedge terranes in Japan. These new biostratigraphic data provide the key to understanding the original relationships among highly disrupted Paleozoic terranes in Japan and northeast Asia.     

Mineral chemistry and petrogenesis of chromitites from the Khoy ophiolite complex,Northwestern Iran: Implications for aggregation of two ophiolites

The Khoy ophiolitic complex in Northwestern Iran is a part of the Tethyan ophiolite belt, and is divided into two sections: the Eastern ophiolite in Qeshlaq and Kalavanes (Jurassic–Cretaceous) and the Western ophiolite in Barajouk, Chuchak and Hessar (Late Cretaceous). Our chromitites can be clearly classified into two groups: high‐Al chromitites (Cr# = 0.38–0.44) from the Eastern ophiolite, and high‐Cr chromitites (Cr# = 0.54–0.72) from the Western ophiolite. The chromian spinels in high‐Al chromitite include primary mineral inclusions mainly as Na‐bearing diopside and pargasite with subordinate rutile and their formation was probably related to reaction between a MORB (mid‐ocean‐ridge basalt)‐like melt with depleted harzburgite, possibly in a back‐arc setting. Their host harzburgites contain clinopyroxene with higher contents of Al₂O₃, Na₂O, Cr₂O₃, and TiO₂ relative to Western harzburgites and are possibly residue after moderate partial melting (~15 %) whereas the Western harzburgite is residue after high partial melting (~25 %). The chromian spinel in the Western Khoy chromitites contains inclusions such as clinopyroxene, olivine and platinum group mineral‐bearing sulfides. These Western chromitites were possibly formed at two stages during arc growth and are divided into the moderately high‐Cr# chromitites (Barajouk and Hessar) and the high‐Cr# chromitites (Chuchak A and C). The former crystallized from island‐arc‐tholeiite (IAT) melts during reaction with the host depleted harzburgites, whereas the latter crystallized from boninitic melts (second stage melt) during reaction with highly depleted harzburgite in a supra‐subduction‐zone environment. Based on the mineral chemistry of chromian spinels, pyroxenes, and mineral inclusions, the chromitites and the host peridotites from the Eastern and Western Khoy ophiolites were formed in a back‐arc basin and arc‐related setting, respectively. The Khoy ophiolitic complex is a tectonic aggregate of the two different ophiolites formed in two different tectonic settings at different ages.     

Chemical mass balance in a reaction zone between serpentinite and metapelites in the Nishisonogi metamorphic rocks, Kyushu, Japan: Implications for devolatilization

Abstract   Reaction zones of 0.5–10.0 m thick are commonly observed between serpentinite and pelitic schist in the Nishisonogi metamorphic rocks, Kyushu, Japan. Each reaction zone consists of almost monomineralic or bimineralic layers of talc + carbonates, actinolite (or carbonates + quartz), chlorite, muscovite and albite from serpentinite to pelitic schist. Magnesite + quartz veins extend into the serpentinite from the talc + carbonates layer, while dolomite veins extend into the pelitic schist from the muscovite layer. These veins are filled by subhedral minerals with oriented growth features. Primary fluid inclusions yield the same homogenization temperatures (145–150°C) both in the reaction zone and in the veins, suggesting their simultaneous formation. Mass-balance calculations using the isocon method indicate that SiO₂, MgO, H₂O and K₂O are depleted in the reaction zone relative to the protoliths. These components were probably extracted from the reaction zone as fluids during the formation of the reaction zone.     

Paleocene large-scale normal faulting along the Median Tectonic Line, western Shikoku, Japan

Abstract   The Median Tectonic Line (MTL) in southwest Japan, a major east–west-trending arc-parallel fault, has been defined as the boundary fault between the Cretaceous Sambagawa metamorphic rocks and Ryoke granitic and metamorphic rocks, which are unconformably covered by the Upper Cretaceous Izumi Group. The juxtaposition by faulting occurred after the deposition of the Izumi Group. Based on detailed fieldwork and previous studies, the authors reconstruct the kinematic history along the MTL during the Paleogene period, which has not been fully understood before. It is noted that although the strata of the Izumi Group along the MTL dip gently, east–west-trending north-vergent folds with the wavelength of ∼300 m commonly develop up to 2 km north from the MTL. Along the MTL, a disturbed zone of the Izumi Group up to 400 m thick, defined by the development of boudinage structures with the transverse boudin axis dipping nearly parallel to the MTL, occurs. Furthermore, east–west-trending north-vergent folds with the wavelength of 1–5 m develop within the distance up to 60 m from the MTL. The disturbed zone with the map-scale north-vergent folds along the MTL, strongly suggests that they formed due to normal faulting with a top-to-the-north sense along the MTL. Considering that the normal faulting is associated with the final exhumation of the Sambagawa metamorphic rocks, and its juxtaposition against the Izumi Group at depth, this perhaps occurred before the denudation of the Sambagawa metamorphic rocks indicated by the deposition of the Lower Eocene Hiwada-toge Formation. Dynamic equilibrium between crustal thickening at depth (underplating) and extension at shallow level is a plausible explanation for the normal faulting because the arc-normal extension suggests gravity as the driving force.     

The frictional behavior of lizardite and antigorite serpentinites: Experiments,constitutive models,and implications for natural faults

Laboratory studies of the frictional behavior of rocks can provide important information about the strength and sliding stability of natural faults. We have conducted friction experiments on antigorite and lizardite serpentinites, rocks common to both continental and oceanic crustal faults. We conducted both velocity-step tests and timed-hold tests on bare surfaces and gouge layers of serpentinite at room temperature. We find that the coefficient of friction of lizardite serpentinite is quite low (0.15–0.35) and could explain the apparent low stresses observed on crustal transform faults, while that of antigorite serpentinite is comparable to other crustal rocks (0.50–0.85). The frictional behavior of both types of serpentinite is well described by a two-mechanism model combining state-variable-dominated behavior at high slip velocities and flow-dominated behavior at low velocities. The two-mechanism model is supported by data from velocity-step tests and timed-hold tests. The low velocity behavior of serpentinite is strongly rate strengthening and should result in stable fault creep on natural faults containing either antigorite or lizardite serpentinite.     

Paleogeographic reconstructions of the East Asia continental margin during the middle to late Mesozoic

The currently available paleogeographic maps of the East Asia continental margin during the Mesozoic have been recast in the light of recent research results on sediments distributed in Korea and Japan. Both the Korean peninsula and the Inner zone of Southwest Japan exchanged sediment supply during the Middle to Late Mesozoic, suggestive of a close paleogeographic relationship between the two countries at the active continental margin setting. During the latest Middle to earliest Late Jurassic the Mino–Tamba trench was developed along the southeastern Korean peninsula, from which trench‐fill sediments were sourced and to which an accretionary complex was accreted. Lower Cretaceous quartz‐arenite clasts of the Tetori Group in the Hida Marginal Belt of Southwest Japan were derived from pre‐Mesozoic quartz‐arenite strata distributed in the southern central and east central Korean peninsula, suggesting that the Tetori Basin was located close to the central eastern part of the Korean peninsula at the time of deposition of quartz‐arenite clasts, contrary to conventional thought of far distance between the two areas based on paleomagnetic data. During the early Late Cretaceous radiolaria‐bearing chert pebbles and sands in the northern part of the non‐marine Gyeongsang Basin distributed in the southeastern Korean peninsula were derived from the uplifted Mino–Tamba accretionary complex distributed in southwest Japan, suggesting that the Mino–Tamba terrane was land‐connected with the eastern Korean peninsula. These new findings suggest that in contrast to conventional thought, the collage of tectonic blocks in Southwest Japan has assembled in post‐early Late Cretaceous time.     

Airborne geophysical prospecting for ultramafite associated talc, Altermark, northern Norway

Talc-rich rocks in Altermark occur as rims around magnetite bearing serpentinite lenses which are up to about 1 km wide. The content of magnetite in the serpentinite makes magnetic measurements possible as a method for talc-prospecting. In 1991 a helicopter-borne geophysical survey combined with geological and petrophysical mapping was carried out in the Altermark area. Several positive magnetic anomalies were detected. Positive magnetic anomalies with oval shapes, well defined boundaries and smooth anomaly curves were interpreted to be caused by serpentinite lenses. Laboratory measurements revealed susceptibilities for the serpentinites between 0.006−0.36 SI and a Q-value of approximately 0.3. Magnetic modelling of the Nakkan anomaly and subsequent drilling revealed that it was indeed a serpentinite body surrounded by talc rocks which was the cause of the anomaly. The shallowest part was located about 150 m below surface. The geophysical exploration led to the discovery of a talc-carbonate deposit with an anticipated in situ tonnage of more than 1 million tons. The present study consequently proved to be a classical case study where we were able to locate and establish the three-dimensional form of serpentinite bodies associated with talc deposits. We conclude that helicopter-borne geophysical surveying is an effective tool in the exploration of serpentinite cored talc bearing rocks in complex geological areas where exposures are poor or absent and accessibility difficult. The rough topography and dense vegetation in the Altermark area make this type of survey very cost effective.