Geochemistry of main types of gold deposits in shear zones, China

Shear zone-hosted gold deposits in China can be divided into four types:ductile,brittle-ductile,ductile-brittle and brittle,of which the ductile and brittle types are the basic ones.All these types of gold deposits have their own geochemical characteristics.The Hetai gold deposit in Guangdong Province,for example,is a mylonite-type gold deposit in a ductile shear zone.With increasing mylonitization,obvious changes took place in trace elements in minerals and rocks,enriching gold and mineralizing elements.The S and Pb isotope data indicated that the ore-forming materials were derived from the strata.Hydrogen and oxygen isotopic and fluid inclusion studies also implied that the ore-forming fluid was much closer to meteoric water from the early to the late ore-forming stage.The Linglong gold deposit,Shangdong Province,is a quartz-type gold deposit in a brittle shear zone.Changes in rocks,minerals and trace elements occurred in the process of f ormation of gold quartz veins,and the analytical results of S,Pb ,Hand O isotopes showed that ore deposition is connected not only with the Jiaodong Group,but also with anatexic granites.     

Genesis of the Gold Deposit in the Indus-Yarlung Tsangpo Suture Zone, Southern Tibet: Evidence from Geological and Geochemical Data

The Nianzha gold deposit,located in the central section of the Indus-Yarlung Tsangpo suture(IYS) zone in southern Tibet,is a large gold deposit(Au reserves of 25 tons with average grade of 3.08 g/t) controlled by a E-W striking fault that developed during the main stage of Indo-Asian collision(~65-41 Ma).The main orebody is 1760 m long and 5.15 m thick,and occurs in a fracture zone bordered by Cretaceous diorite in the hanging wall to the north and the Renbu tectonic melange in the footwall to the south.High-grade mineralization occurs in a fracture zone between diorite and ultramafic rock in the Renbu tectonic melange.The wall-rock alteration is characterized by silicification in the fracture zone,serpentinization and the formation of talc and magnesite in the ultramafic unit,and chloritization and the formation of epidote and calcite in diorite.Quartz veins associated with Au mineralization can be divided into three stages.Fluid inclusion data indicate that the deposit formed from H_2O-NaCl-organic gas fluids that homogenize at temperatures of 203℃-347℃ and have salinities of 0.35wt%-17.17wt%NaCl equivalent.The quartz veins yield δ~(18)O_(fluid) values of 0.15‰-10.45‰,low δD_(V-SMOW)values(-173‰ to-96‰),and the δ~(13)C values of-17.6‰ to-4.7‰,indicating the ore-forming fluids were a mix of metamorphic and sedimentary orogenic fluids with the addition of some meteoric and mantle-derived fluids.The pyrite within the diorite has δ~(34)S_(V-CDT) values of-2.9‰-1.9‰(average-1.1‰),~(206)Pb/~(204)Pb values of 18.47-18.64,~(207)Pb/~(204)Pb values of 15.64-15.74,and ~(208)Pb/~(204)Pb values of 38.71-39.27,all of which are indicative of the derivation of S and other ore-forming elements from deep in the mantle.The presence of the Nianzha,Bangbu,and Mayum gold deposits within the IYS zone indicates that this area is highly prospective for large orogenic gold deposits.We identified three types of mineralization within the IYS,namely Bangbu-type accretionary,Mayum-type microcontinent,and Nianzha-type ophiolite-associated orogenic Au deposits.The three types formed at different depths in an accretionary orogenic tectonic setting.The Bangbu type was formed at the deepest level and the Nianzha type at the shallowest.     

Geology and Isotope Geochemistry of the Yinchanggou-Qiluogou Pb-Zn Deposit, Sichuan Province, Southwest China

The Yinchanggou-Qiluogou Pb-Zn deposit,located in the western Yangtze Block,southwest China,is hosted by the Upper Sinian Dengying Formation dolostone.Ore bodies occur in the Qiluogou anticline and the NS-and NNW-trending faults.Sulfide ores mainly consist of sphalerite,pyrite,galena and calcite,with subordinate dolomite and quartz.Seventeen ore bodies have been discovered to date and they have a combined 1.0 million tons of sulfide ores with average grades of 2.27wt%Zn and 6.89wt%Pb.The δD_(H2O-SMOW) and δ~(18)O_(H2O-SMOW) values of fluid inclusions in quartz and calcite samples range from-68.9‰ to-48.7‰ and 7.3‰ to 15.9‰,respectively,suggesting that H_2O in the hydrothermal fluids sourced from metamorphic water.Calcite samples have δ~(13)C_(PDB) values ranging from-6.2‰ to-4.1‰ and δ~(18)O_(SMOW) values ranging from 15.1‰ to 17.4‰,indicating C and O in the hydrothermal fluids likely derived from a mixed source of metamorphic fluids and the host carbonates.The δ~(34)S_(CDT) values of sulfide minerals range from 5.5‰ to 20.3‰,suggesting that thermal chemical reduction of sulfate minerals in evaporates were the most probable source of S in the hydrothermal fluids.The ~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb and ~(208)Pb/~(204)Pb ratios of sulfide minerals fall in the range of 18.11 to 18.40,15.66 to 15.76 and 38.25 to 38.88,respectively.The Pb isotopic data of the studied deposit plot near the upper crust Pb evolution curve and overlap with the age-corrected Proterozoic basement rocks and the Upper Sinian Dengying Formation hosting dolostone.This indicates that the Pb originated from a mixed source of the basement metamorphic rocks and the ore-hosting carbonate rocks.The ore geology and C-H-O-S-Pb isotopic data suggest that the YinchanggouQiluogou deposit is an unusual carbonate-hosted,strata-bound and epigenetic deposit that derived ore-forming materials from a mixed source of the underlying Porterozoic basements and the Sinian hosting carbonates.     

http://www.sciencedirect.com/science/article/pii/S1674987113000790

The Heilangou gold deposit is located in the northern QixiaePenglai gold belt, which is one amongst the three large gold belts in the eastern Shandong Province （Jiaodong Peninsula）. The ore body has formed within the Guojialing granite. In this study, we report the mineral chemistry of pyrite, as well as the S, Pb, and HeO isotope data of the Heilangou gold deposit. The chemical composition of pyrite in the Heilangou gold deposit indicates that the associated gold deposit is a typical magmatic hydrothermal one. The geochemical signatures and crystal structure of pyrite show that the ore-forming materials have been derived from the crust. The S isotope data of the pyrites from Heilangou show an overall range from 5.5 to 7.8＆amp;and an average of 6.7＆amp;. The S isotope data in this deposit are similar to those from the deposits in the Jiaodong gold belt. The Pb and S isotope variations are small in the Heilangou gold deposit. The 206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb ratios are 17.4653e17.5958, 15.5105e15.5746 and 38.0749e38.4361, respec-tively. These data plot between the lower crust and the orogenic belt. The Pb isotope data in the Heilangou gold deposit are similar to those in the Linglong gold deposit. From the Qixia gold area （the Liukou and Majiayao gold deposits） to the MupingeRushan gold belt （Rushan gold deposit） to the ZhaoeYe gold belt （the Linglong, Sanshandao and Jiaojia gold deposits）, the 206Pb/204Pb ratios progressively increase. The DeO isotope data obtained from quartz separates suggest that the ore-forming fluid was similar to a mixture of magmatic and meteoric waters. These results suggest that the ore-forming elements were primarily from source fluids derived from the lower crust.     

H-O-S-Cu-Pb Isotopic Constraints on the Origin of the Nage Cu-Pb Deposit, Southeast Guizhou Province, SW China

The Nage Cu-Pb deposit,a new found ore deposit in the southeast Guizhou province,southwest China,is located on the southwestern margin of the Jiangnan Orogenic Belt.Ore bodies are hosted in slate and phyllite of Neoproterozoic Jialu and Wuye Formations,and are structurally controlled by EW-trending fault.It contains Cu and Pb metals about 0.12 million tonnes with grades of 0.2 wt% to 3.4 wt% Cu and 1.1 wt% to 9.27 wt% Pb.Massive and disseminated Cu-Pb ores from the Nage deposit occur as either veinlets or disseminations in silicified rocks.The ore minerals include chalcopyrite,galena and pyrite,and gangue minerals are quartz,sericite and chlorite.The H-O isotopic compositions of quartz,S-Cu-Pb isotopic compositions of sulfide minerals,Pb isotopic compositions of whole rocks and ores have been analyzed to trace the sources of ore-forming fluids and metals for the Nage Cu-Pb deposit.The δ65CuNBS values of chalcopyrite range from-0.09% to +0.33‰,similar to basic igneous rocks and chalcopyrite from magmatic deposits.δ65CuNBS values of chalcopyrite from the early,middle and final mineralization stages show an increasing trend due to63Cu prior migrated in gas phase when fluids exsolution from magma.δ34SCDT values of sulfide minerals range from 2.7‰ to +2.8‰,similar to mantle-derived sulfur(0±3‰).The positive correlation between δ65CuNBS and δ34SCDT values of chalcopyrite indicates that a common source of copper metal and sulfur from magma.δDH2OSMOW and δ18OH2O-SMOW values of water in fluid inclusions of quartz range from 60.7‰ to 44.4‰ and +7.9‰ to +9.0‰(T=260°C),respectively and fall in the field for magmatic and metamorphic waters,implicating that mixed sources for H2O in hydrothermal fluids.Ores and sulfide minerals have a small range of Pb isotopic compositions(208Pb/204Pb=38.152 to 38.384,207Pb/204Pb=15.656 to 17.708 and 206Pb/204Pb=17.991 to 18.049) that are close to orogenic belt and upper crust Pb evolution curve,and similar to Neoproterozoic host rocks(208Pb/204Pb=38.201 to 38.6373,207Pb/204Pb=15.648 to 15.673 and 206Pb/204Pb=17.820 to 18.258),but higher than diabase(208Pb/204Pb=37.830 to 38.012,207Pb/204Pb=15.620 to 15.635 and206Pb/204Pb=17.808 to 17.902).These results imply that the Pb metal originated mainly from host rocks.The H-O-S-Cu-Pb isotopes tegather with geology,indicating that the ore genesis of the Nage Cu-Pb deposit is post-magmatic hydrothermal type.     

China’s First Independent Cobalt Deposit and its Metallogenic Mechanism: Evidence from Fluid Inclusions and Isotopic Geochemistry

The Tuolugou cobalt deposit is the first independent large-scale Co- and Au-bearing deposit discovered in northwestern China. It is located in the eastern Kunlun orogenic belt in Qinghai Province, and occurs conformably in low-grade metamorphic volcano-sedimentary rock series with well-developed Na-rich hydrothermal sedimentary rocks and typical hydrothermal sedimentary ore fabrics. Fluid inclusions and isotopic geochemistry studies suggest that cobalt mineralizing fluid is dominated by NaCl-H2O system, accompanied by NaCl-CO2-H2O-N2 system responsible for gold mineralization. Massive, banded and disseminated pyrite ores have similar compositions of He and Ar isotopes from the mineralizing fluid, with 3He/4He range between 0.10 to 0.31Ra (averaging 0.21Ra), and 40Ar/36Ar between 302 and 569 (averaging 373), which reflects that Co mineralizing fluids derived dominantly from meteoric water deeply circulating. δ34S values of pyrite approaches to zero (δ34S ranging from ?4.5‰ to +1.5‰, centering around ?1.8‰ to ?0.2‰), reflecting its deep source. Ore lead is characterized by distinctly high radiogenesis, with 206Pb/204Pb>19.279, 207Pb/204Pb>15.691 and 208Pb/204Pb>39.627, and its values show an increase trend from country rocks, regional Paleozoic volcanic rocks to ores. This may have suggested that high radiogentic ore Pb derived mainly from country rocks by leaching meteoric water-dominated hydrothermal fluid during its circulation at depth. Cobalt occurs mainly in sulfide phase (such as pyrite), but cobalt enrichment, and presence and increasing contents of Co-bearing minerals have a positive correlation with metamorphic degree. The Tuolugou deposit and other typical strata-bound Co-Cu-Au deposits have striking similarities in the geological features and metallogenic pattern of primary cobalt. All of them are syngenetic hydrothermal exhalative sedimentation in origin.     

S and Pb Isotopic Constraints on the Relationship between the Linong Granodiorite and the Yangla Copper Deposit,Yunnan, China

The Yangla copper deposit, located in western Yunnan Province, China, is a typical giant, newly started mining copper deposit with an estimated Cu reserves of about 1,200,000 tons. The deposit is spatially and temporally associated with the Linong granodiorite, which is rich in SiO2 (SiO2=58.25 wt%–69.84 wt%) and alkalis (Na2O+K2O=5.98 wt%–8.34 wt%), indicating an association with shoshonitic series to high-K calc-alkaline series granites, and shows low contents of TiO2 (0.35 wt%–0.48 wt%), MgO (1.51 wt%–1.72 wt%), and Al2O3 (13.38 wt%–19.75 wt%). The δ34S values of sulfides of the main ore stage from copper ores vary range from ?4.2‰ to ?0.9‰, indicating a much greater contribution from the mantle to the ore-forming fluids. The δ34S values of the late ore stage is ?9.8‰, indicating enrichment of biogenic sulfur which may derive from the crustal hydrothermal fluid. The 208Pb/204Pb, 207Pb/204Pb and 206Pb/204Pb of sulfides of the main ore stage from copper ores range within 38.66–38.73, 15.71–15.74 and 18.35–19.04, respectively, implying that the Pb was derived from the mantle, with the crustal component, probably representing mixtures of mantle lead and crustal lead. Sulfide of the late ore stage in their Pb isotopic composition, 208Pb/204Pb= 38.69, 207Pb/204Pb=15.70, 206Pb/204Pb=18.35, implying that the Pb was derived from the crust. The Linong granodiorite is syn-collisional, produced by partial melting of thickened lower crust, which was triggered by the westward subduction of the Jinshajiang Oceanic plate. During a transition in geodynamic setting from collision-related compression to extension, gently dipping ductile shear zones (related to subduction) were transformed to brittle shear zones, consisting of a series of thrust faults in the Jinshajiang tectonic belt. The tensional thrust faults would have been a favorable environment for ore-forming fluids. The ascending magma provided a channel for the ore-forming fluid from the mantle wedge. After the magma arrived at the base of the early-stage Linong granodiorite, the platy granodiorite at the base of the body would have shielded the late-stage magma from the fluid. The magma would have cooled slowly, and some of the ore-forming fluid in the magma would have entered the gently dipping thrust faults near the Linong granodiorite, resulting in mineralization.     

H-O-S-Pb Isotopic Compositions of the Chagele Pb-Zn-Cu-Mo Deposit,Tibet: Implications for the Ore-forming Processes and Comparison with Pb-Zn (Cu-Mo) Deposits in Middle-east Segment of the Nyainqentanglha Metallogenic BeltEI北大核心CSCD

The Chagele is a typical Pb-Zn-Cu-Mo deposit located in the western Nyainqentanglha Pb-Zn-Ag-Fe-Cu metallogenic belt (NPMB) that immediately north of the Gangdese porphyry copper belt, Tibet. The deposit contains three ore types: the porphyry (Cu) Mo ores occur as thin veins hosted in the granite porphyry; the skarn (Cu) Pb-Zn type ores are of vein-type or lenticular-type mainly occurring in the external contact zone and interstratified crack zone; and the hydrothermal vein Pb-Zn type ores are controlled by the NNE-striking faults and situated in the structural fractured zones and the up walls of fault zones. The (Cu) Pb-Zn ores consist mainly of galena, sphalerite, chalcopyrite, pyrite, malachite, showing automorphic granular, hypautomorphic to allotriomorphic granular and metasomatic-relict textures, and exhibiting mainly veined, banded, disseminated and massive structures. Hydrothermal alteration includes skarnization, silicification and limonitization. The (Cu) Mo ores consists mainly of chalcopyrite and molybdenite, and minor pyrite. The (Cu) Mo ores are characterized by scaly texture, veinlet and massive structures. It has reserves of 0.38 Mt Pb, 0.6 Mt Zn and 110.1 t Ag, with average grade of 2.08%, 3.29% and 6.07 g/t, respectively, and is considered as a deposit with huge ore-prospecting potential in western of NPMB. However, the ore-forming material and genesis of the Chagele deposit are still not clear. This paper systematically investigated the H, O, S and Pb isotopes of the Chagele deposit and compared it with the other Pb-Zn (Cu-Mo) deposits in the middle-east segment of NPMB. Isotopic geochemical analyses showed that the fluids have δ18O values of -2.2‰ to 2.9‰ and δD values of -189‰ to -157‰, respectively, indicative of mixing between magmatic and meteoric waters. The bimodal distribution of δ34 S values for sulfides (-5.6‰ to -0.8‰, the average: -3.7‰ and 1.1‰ to 2.6‰, the average: 1.8‰) indicated that sulfur of the ores were derived from both wall rocks and magma, while the Cu-Mo orebodies was mainly derived from the granite porphyry. The sulfides have 206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb values in ranges of 18.614 to 18.688, 15.657 to 15.747 and 38.988 to 39.269; similarly the granite porphyries have 206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb values of 18.663 to 19.058, 15.643 to 15.664, and 39.002 to 39.559, respectively, implying that both of them were originated from the upper crust. The H-O-S-Pb isotopic characteristics of the Chagele deposit are similar to those of the Pb-Zn polymetallic deposits in the mid-east NPMB, suggesting that these deposits have similar ore-forming fluid and material sources. It can be concluded that the Chagele deposit is a typical porphyry type Mo deposit + skarn type-hydrothermal vein type of Cu-Pb-Zn deposit. Moreover, we argue that the mineralization is not only confined to the mid-east NPMB, the western segment of the belt with similar tectonic-magmatism also has high potential of ore mineralization. © 2018, Science Press. All right reserved.     

Genesis of the Weiquan Ag–Polymetallic Deposit in East Tianshan, China: Evidence from Zircon U–Pb Geochronology and C–H–O–S–Pb Isotope Systematics

The Weiquan Ag-polymetallic deposit is located on the southern margin of the Central Asian Orogenic Belt and in the western segment of the Aqishan-Yamansu arc belt in East Tianshan,northwestern China. Its orebodies, controlled by faults, occur in the lower Carboniferous volcanosedimentary rocks of the Yamansu Formation as irregular veins and lenses. Four stages of mineralization have been recognized on the basis of mineral assemblages, ore fabrics, and crosscutting relationships among the ore veins. Stage I is the skarn stage(garnet + pyroxene), Stage Ⅱ is the retrograde alteration stage(epidote + chlorite + magnetite ± hematite 士 actinolite ± quartz),Stage Ⅲ is the sulfide stage(Ag and Bi minerals + pyrite + chalcopyrite + galena + sphalerite + quartz ± calcite ± tetrahedrite),and Stage IV is the carbonate stage(quartz + calcite ± pyrite). Skarnization,silicification, carbonatization,epidotization,chloritization, sericitization, and actinolitization are the principal types of hydrothermal alteration. LAICP-MS U-Pb dating yielded ages of 326.5±4.5 and 298.5±1.5 Ma for zircons from the tuff and diorite porphyry, respectively. Given that the tuff is wall rock and that the orebodies are cut by a late diorite porphyry dike, the ages of the tuff and the diorite porphyry provide lower and upper time limits on the age of ore formation. The δ~(13)C values of the calcite samples range from-2.5‰ to 2.3‰, the δ~(18)O_(H2 O) and δD_(VSMOW) values of the sulfide stage(Stage Ⅲ) vary from 1.1‰ to 5.2‰ and-111.7‰ to-66.1‰, respectively,and the δ~(13)C, δ~(18)O_(H2 O) and δD_(V-SMOW) values of calcite in one Stage IV sample are 1.5‰,-0.3‰, and-115.6‰, respectively. Carbon, hydrogen, and oxygen isotopic compositions indicate that the ore-forming fluids evolved gradually from magmatic to meteoric sources. The δ~(34)S_(V-CDT) values of the sulfides have a large range from-6.9‰ to 1.4‰, with an average of-2.2‰, indicating a magmatic source, possibly with sedimentary contributions. The ~(206)Pb/~(204)Pb, ~(207)Pb/~(204)Pb, and ~(208)Pb/~(204)Pb ratios of the sulfides are 17.9848-18.2785,15.5188-15.6536, and 37.8125-38.4650, respectively, and one whole-rock sample at Weiquan yields~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb, and ~(208)Pb/~(204)Pb ratios of 18.2060, 15.5674, and 38.0511,respectively. Lead isotopic systems suggest that the ore-forming materials of the Weiquan deposit were derived from a mixed source involving mantle and crustal components. Based on geological features, zircon U-Pb dating, and C-H-OS-Pb isotopic data, it can be concluded that the Weiquan polymetallic deposit is a skarn type that formed in a tectonic setting spanning a period from subduction to post-collision. The ore materials were sourced from magmatic ore-forming fluids that mixed with components derived from host rocks during their ascent, and a gradual mixing with meteoric water took place in the later stages.     

Genesis of the Dalingzi Pb-Zn Deposit in the Western Margin of Yangtze Plate: Constraints from Fluid Inclusions and Isotopic EvidenceEI北大核心CSCD

The Daliangzi Pb-Zn deposit is a large deposit hosted in the Sinian Dengying Formation dolostone, located in the Sichuan-Yunnan-Guizhou ore concentration area. Ore minerals are mianly sphalerite, galena, and gangue minerals consist of dolomite, quartz and calcite. The metallogenic stages may be divided into sphalerite-pyrite-carbon stage, sphalerite-galena stage and galena-chalcopyrite-carbonate stage. The ore-forming fluid is basin brine, which is characterized by medium-low temperature of 117.5 ℃ to 320.3 ℃ and medium salinity of 5.11% NaCleqv to 18.96% NaCleqv, moreover, the abundant CH4 and pitch in the fluid inclusions indicate that the participation of organic matter in the mineralization. The δ13CV-PDB and δ18OSMOW values of the Dengying Formation dolostone are similar to that of marine carbonate, revealing that the dolostone belongs to marine carbonate. Both the δ13CV-PDB and δ18OSMOW values of hydrothermal calcites are lower than that of the Dengying Formation dolostone, which may result from dissolution of the Dengying Formation dolostone. The δ34S values of ore minerals are mainly in the range of 9.8‰-20.8‰, indicating the sulfur may come from thermochemical reduction of marine sulfate in the Dengying Formation. The 207Pb/204Pb versus 206Pb/204Pb diagram manifests that Pb is crustal origin, and likely comes mainly from the wall rocks and less from the basement. (87Sr/86Sr)i ratios of sphalerites and hydrothermal calcite are higher than that of the Dengying Formation dolostone, indicating that the ore-forming fluid flew through the basement. In conclusion, the ore-forming fluid was basin brine, which extracted the metallogenic materials, Pb and Zn, from the basement and wall rocks. When the ore-forming fluid reached the "black fractured zones", carbonized tectonic breccia zone, S2- was produced by the thermochemical reduction reaction under the influence of the organic matter, and interaction between the S2- and Pb2+, Zn2+, resulted in the precipitation of ore metals. © 2018, Science Press. All right reserved.     

Genesis of the Xiuwenghala Gold Deposit in the Beishan Orogen,Northwest China: Evidence from Geology,Fluid Inclusion,and H–O–S–Pb Isotopes

The Xiuwenghala gold deposit is located in the Beishan Orogen of the southern Central Asian Orogenic Belt. The vein/lenticular gold orebodies are controlled by Northeast‐trending faults and are hosted mainly in the brecciated/altered tuff and rhyolite porphyry of the Lower Carboniferous Baishan Formation. Metallic minerals include mainly pyrite and minor chalcopyrite, arsenopyrite, galena, and sphalerite, whilst nonmetallic minerals include quartz, chalcedony, sericite, chlorite, and calcite. Hydrothermal alterations consist of silicic, sericite, chlorite, and carbonate. Alteration/mineralization processes comprise three stages: pre‐ore silicic alteration (Stage I), syn‐ore quartz‐chalcedony‐polymetallic sulfide mineralization (Stage II), and post‐ore quartz‐calcite veining (Stage III). Fluid inclusions (FIs) in quartz and calcite are dominated by L‐type with minor V‐type and lack any daughter mineral‐bearing or CO₂‐rich/‐bearing inclusions. From Stages I to III, the FIs homogenized at 240–260°C, 220–250°C, and 150–190°C, with corresponding salinities of 2.9–10.9, 3.2–11.1, and 2.9–11.9 wt.% NaCl eqv., respectively. The mineralization depth at Xiuwenghala is estimated to be relatively shallow (<1 km). FI results indicate that the ore‐forming fluids belong to a low to medium‐temperature, low‐salinity, and low‐density NaCl‐H₂O system. The values decrease from Stage I to III (3.7‰, 1.7–2.4‰, and ?1.7 to 0.9‰, respectively), and a similar trend is found for their values (?104 to ?90‰, ?126 to ?86‰, and ?130 to ?106‰, respectively). This indicates that the fluid source gradually evolved from magmatic to meteoric. δ³⁴S values of the hydrothermal pyrites (?3.0 to 0.0‰; avg. ?1.1‰) resemble those of typical magmatic/mantle‐derived sulfides. Pyrite Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb = 18.409–18.767, ²⁰⁷Pb/²⁰⁴Pb = 15.600–15.715, ²⁰⁸Pb^/204Pb = 38.173–38.654) are similar to those of the (sub)volcanic ore host, indicating that the origin of ore‐forming material was mainly the upper crustal (sub)volcanic rocks. Integrating evidence from geology, FIs, and H–O–S–Pb isotopes, we suggest that Xiuwenghala is best classified as a low‐sulfidation epithermal gold deposit.     

Genesis of the Bangbu Orogenic Gold Deposit,Tibet: Evidence from Fluid Inclusion,Stable Isotopes,and Ar-Ar Geochronology

The Bangbu gold deposit is a large orogenic gold deposit in Tibet formed during the AlpineHimalayan collision. Ore bodies(auriferous quartz veins) are controlled by the E-W-trending Qusong-Cuogu-Zhemulang brittle-ductile shear zone. Quartz veins at the deposit can be divided into three types: pre-metallogenic hook-like quartz veins, metallogenic auriferous quartz veins, and postmetallogenic N-S quartz veins. Four stages of mineralization in the auriferous quartz veins have been identified:(1) Stage S1 quartz+coarse-grained sulfides,(2) Stage S2 gold+fine-grained sulfides,(3) Stage S3 quartz+carbonates, and(4) Stage S4 quartz+ greigite. Fluid inclusions indicate the oreforming fluid was CO_2-N_2-CH_4 rich with homogenization temperatures of 170–261°C, salinities 4.34–7.45 wt% Na Cl equivalent. δ~(18)Ofluid(3.98‰–7.18‰) and low δDV-SMOW(-90‰ to-44‰) for auriferous quartz veins suggest ore-forming fluids were mainly metamorphic in origin, with some addition of organic matter. Quartz vein pyrite has δ~(34)SV-CDT values of 1.2‰–3.6‰(an average of 2.2‰), whereas pyrite from phyllite has δ~(34)SV-CDT 5.7‰–9.9‰(an average of 7.4‰). Quartz vein pyrites yield 206Pb/204 Pb ratios of 18.662–18.764, 207Pb/204 Pb 15.650–15.683, and ~(208)Pb/204 Pb 38.901–39.079. These isotopic data indicate Bangbu ore-forming materials were probably derived from the Langjiexue accretionary wedge. 40Ar/39 Ar ages for sericite from auriferous sulfide-quartz veins yield a plateau age of 49.52 ± 0.52 Ma, an isochron age of 50.3 ± 0.31 Ma, suggesting that auriferous veins were formed during the main collisional period of the Tibet-Himalayan orogen(~65–41 Ma).     

Genesis of the Zhengguang gold deposit in the Duobaoshan ore field,Heilongjiang Province,NE China: Constraints from geology,geochronology and S-Pb isotopic compositions

The Zhengguang gold deposit in the Duobaoshan ore field, hosted in volcanic rocks of the Middle Ordovician Duobaoshan Formation, is one of the largest gold deposits in the Northeastern Great Xing’an Range of the Central Asian Orogenic Belt (CAOB). The deposit comprises the No. I, II and III ore zones with a total resource exceeding 35 tonnes of Au, 100,000 tonnes of Zn and 100 tonnes of Ag. A genetic relationship between gold mineralization and concealed tonalite porphyry is inferred based on the characteristics of cryptoexplosive breccia and hydrothermal alteration indicative of porphyry-type and epithermal mineralization. Zircon LA-ICPMS U-Pb dating reveals that the tonalite porphyry was emplaced at 462.1 ± 1.8 Ma (Middle Ordovician). The δ³⁴S_V-CDT values of sulfide minerals range from −3.0‰ to −1.7‰ with an average of −2.33‰, indicating that sulfur was mainly derived from a magmatic source. The Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb ranging from 17.572 to 17.629, ²⁰⁷Pb/²⁰⁴Pb from 15.424 to 15.486, and ²⁰⁸Pb/²⁰⁴Pb from 37.206 to 37.418) suggest a major mantle component for Pb and, by inference, for other ore metals. Therefore, we suggest that the ore-forming elements in the Zhengguang gold deposit may be related to the mantle-sourced tonalite porphyry. On the basis of the geological characteristics and geochemical signatures documented in this study, we conclude that the Zhengguang gold deposit was formed in a porphyry to epithermal transitional environment associated with the concealed tonalite porphyry, as part of the Duobaoshan porphyry-epithermal ore system that is related to the subduction of the Paleo-Asian Ocean during the Ordovician.     

40Ar/39Ar dating,fluid inclusions and S–Pb isotope systematics of the Shabaosi gold deposit,Heilongjiang Province,China

The Shabaosi deposit is the only large lode gold deposit in the northern Great Xing'an Range. The gold ore bodies are hosted by sandstone and siltstone of the Middle Jurassic Ershi'erzhan Formation, and are controlled by three N–S‐trending altered fracture zones. The gold ore bodies are composed of auriferous quartz veinlets and altered rocks. Fluid inclusion studies indicate that the ore‐forming fluids belong to a H₂O–NaCl–CO₂–CH₄ system, with salinities between 0.83 and 8.28 wt% NaCl eq., and homogenization temperatures ranging from 180 to 320 °C. The δ³⁴S values of sulphides show a large variation from −16.9‰ to 8.5‰. The Pb isotope compositions of sulphides are characterized by a narrow range of ratios: 18.289 to 18.517 for ²⁰⁶Pb/²⁰⁴Pb, 15.548 to 15.625 for ²⁰⁷Pb/²⁰⁴Pb, and 38.149 to 38.509 for ²⁰⁸Pb/²⁰⁴Pb. The μ values range from 9.36 to 9.51. These results suggest that the ore‐forming fluids/materials were mainly of magmatic hydrothermal origin, derived from magmas produced by partial melting of the lower crust. The ⁴⁰Ar/³⁹Ar age of auriferous quartz veinlets from the Shabaosi gold deposit is about 130 Ma. The Shabaosi gold deposit has counterparts in similar orogenic gold deposits, and was formed during the post‐collisional setting of the Mongolia–Okhotsk Orogen. Copyright © 2014 John Wiley & Sons, Ltd.     

The Kiloton Class Jiaojia Gold Deposit in Eastern Shandong Province and Its Genesis

The recent deep prospecting results in the Jiaojia area of Eastern Shandong Province indicate that the Jiaojia ore field composed of several individual gold deposits as previously suggested is actually an ultra-large gold deposit. This deposit covers an area of ~40 km2, and shows a structural control by the Jiaojia fault and its secondary faults. Gold orebodies generally occur along the same mineralization-alteration belt, and the main orebodies intersect with each other or exhibit a parallel or overlapping distribution. This deposit's reserves are estimated to be 1, 200t of gold, being the first gold deposit of more than 1000t gold reserves in China. The No. I-1 orebody in the Shaling-deep Sizhuang ore blocks holds gold reserves greater than 350 t, or 29 percent of the total reserves, followed by the No. I orebody in Matang-Jiaojia ore blocks with exceeding 150t gold reserves. This deposit mainly occurs in the footwall of the Jiaojia fault, and presents zoned patterns in mineralization, alteration and structures. The strongly mineralized zones agree with strongly altered and tectonically fractured zones. These orebodies display strataform-like, veinlike or lenticular shapes, and generally show characteristics of pinching out and reappearing, branching and converging, expanding and shrinking. The orebodies commonly occur along positions where the fault strike changes and in gentle locations with dips changing from steep to gentle. The main orebodies are parallel to the main plane of the orecontrolling fault, and tend to be gentle from the surface to the deep. The orebodies mainly plunge to the southwest, with plunge angle of 45°–60°. Orebodies near the main plane of the ore-controlling fault have more gold resource than those away from main fault zone. The slant depth of orebodies is generally larger than the length along its strike direction; orebodies become thick and gold grades become low from the shallow area to the deep area. Ore-forming fluids are H2O-CO2-NaCl±CH4 type with medium-temperature and moderate to low salinity. Sulfur isotopic values(δ34SCDT) for gold ores range between 11.08‰ and 12.58‰, indicating mixed sulfur sources; hydrogen isotopic values(δDVSMOW) range from-83.68‰ to-116.95‰ and oxygen isotopic values(δ18OV-SMOW) range between 12.04‰ and 16.28‰. The hydrogen and oxygen isotopes suggest that ore-forming fluids originated from primary magma, and mixing with a large amount of atmospheric water during the late stage. The Eastern Shandong Province gold deposits are associated with magmatic activities which have mantlecrust-mixed source, and also share some similarities with orgenic and epithermal hydrothermal gold deposits. Because Eastern Shandong Province gold deposits with unique metallogenic features and formation setting which are different from other gold deposit types in the world, we call it the Jiaojiatype gold deposits. The kiloton class Jiaojia gold deposit is related to fluid activities, extension and detachment resulted from thermal upwelling of magmas. The strong magmatic activities in the middle to late stage of early Cretaceous in Eastern Shandong Province lead to active fluids, and provided abundant ore-forming materials for gold depsoits. Moreover, many extensional structures resulting from crustal extension provided favourable space for orebody positioning.     

Geology and Isotope Geochemistry of the Dongzhongla Pb–Zn Deposit in Tibet: Implications for the Origin of the Ore‐Forming Fluids and Storage Condition of Certain Metals

As a newly discovered medium‐sized deposit (proven Pb + Zn resources of 0.23 Mt, 9.43% Pb and 8.73% Zn), the Dongzhongla skarn Pb–Zn deposit is located in the northern margin of the eastern Gangdese, central Lhasa block. Based on the geological conditions in this deposit of ore‐forming fluids, H, O, C, S, Pb, Sr, and noble gas isotopic compositions were analyzed. Results show that δ¹⁸O_SMOW of quartz and calcite ranged from −9.85 to 4.17‰, and δD_SMOW ranged from −124.7 to −99.6‰ (where SMOW is the standard mean ocean water), indicating magma fluids mixed with meteoric water in ore‐forming fluids. The δ¹³C_PDB and δ¹⁸O_SMOW values of calcite range from −1.4 to −1.1‰ and from 5.3 to 15.90‰, respectively, show compositions consistent with the carbonate limestone in the surrounding rocks, implying that the carbon was primarily sourced from the dissolution of carbonate strata in the Luobadui Formation. The ore δ³⁴S composition varied in a narrow range of 2.8 to 5.7‰, mostly between 4‰ and 5‰. The total sulfur isotopic value δ³⁴S was 4.7‰ with characteristics of magmatic sulfur. The ³He/⁴He values of pyrite and galena ranged from 0.101 to 5.7 Ra, lower than those of mantle‐derived fluids (6 ± 1 Ra), but higher than those of the crust (0.01–0.05 Ra), and therefore classified as a crust–mantle mixed source. The Pb isotopic composition for ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb values of the ores were in the ranges of 18.628–18.746, 15.698–15.802, and 39.077–39.430, respectively, consistent with the Pb isotopic composition of magmatic rocks in the deposit, classified as upper‐crust lead. The ore lead was likely sourced partially from the crustal basement of the Lhasa Terrane. The initial (⁸⁷Sr/⁸⁶Sr)_i value from five sulfide samples ranged from 0.71732 to 0.72767, and associated ore‐forming fluids were mainly sourced from the partial melting of the upper‐crust materials. Pb isotopic compositions of ore sulfides from the Dongzhongla deposit are similar to that of the Yuiguila and Mengya'a deposit, indicating that they have similar sources of metal‐rich ore‐forming solution. According to basic skarn mineralogy, the economic metals, and the origin of the ore‐forming fluids, the Dongzhongla deposit was classified as a skarn‐type Pb–Zn deposit.     

Geology,Mineralogy, Geochronology,and Sulfur Isotope Constraints on the Genesis of the Luanling Gold Telluride Deposit,Western Henan Province,Central China

The Luanling gold telluride deposit in the Xiong'ershan region is located in the southern margin of the North China Craton. The deposit formed in four stages, that is, an early pyrite‐quartz stage (I), a pyrite‐molybdenite stage (II), a sulfide‐telluride‐gold stage (III), and a late carbonate stage (IV). Six species of telluride in stage (III) are recognized, including hessite, altaite, petzite, unidentified Au‐Ag‐Te mineral, empressite, and unidentified Ag‐Te‐S mineral. Gold occurs mostly as native gold and electrum along the microfractures of sulfides or the contact between sulfide and telluride. The mineralization temperature of stage I and stage III ranges from 296 to 377°C and 241 to 324°C, respectively. Tellurides in stage III precipitate at the log?_S2 from ?14.3 to ?7.3 and log?_Te2 from ?17.4 to ?9.4. The ores were formed in an oxidizing environment. The Re‐Os model ages of molybdenite are 162–164 Ma, which indicate that the main ore formation stage was in the Late Jurassic. The Re contents of five molybdenite samples from the Luanling deposit have a range of 36.32–81.95 ppm, except for one large value of 220 ppm, which indicates that the ore‐forming materials are mainly derived from a crustal‐dominated source. The δ³⁴S values of sulfides range from ?17.6 to ?6.2‰, whereas those of sulfates are from 6.8 to 11.5‰. The δ³⁴S_∑S value of the ore‐forming system is 0.0–3.7‰, indicating that the sulfur of the Luanling deposit derived from a deep igneous source. Mineral association and isotope data of the Luanling deposit, together with its geodynamic setting, imply that this deposit belongs to a part of the metallogenic system of the Nannihu‐Sandaozhuang, Shangfangou porphyry molybdenum deposits, and the Late Jurassic granitic intrusions.