Geological Relationships Between the Intrusions,Country Rocks,and Ni-Cu-PGE Sulfides of the Kharaelakh Intrusion,Noril′sk Region:Implications for the Roles of Sulfide Differentiation and Metasomatism in Their Genesis

The Ni-Cu-platinum group element sulfide ore deposits of the Kharaelakh Intrusion,Noril′sk Region,Siberia,represent a large concentration of sulfides associated with a small differentiated intrusion formed at the edge of the Siberian Craton in the roots of the Siberian Trap flood basalt.The deposit is associated with an intrusion that occupies a flanking periclinal structure adjacent to the Noril′sk-Kharaelakh Fault.The intrusion is strongly differentiated and comprises taxitic gabbrodolerites,picritic gabbrodolerites,and gabbrodolerites within the main body which in turn forms a chonolith within a sheet-like intrusion that extends laterally to form extensive undifferentiated sills of gabbrodolerite.The intrusion substantially replaces the stratigraphy of the country rocks,and although it appears to have exploited the axis of structures developed in response to transtension,the intrusion has created space by both mechanical dilation of stratigraphy and magmatic replacement of pre-existing sedimentary rocks.The frontal lobes of the main intrusion have complex apophyses of gabrodolerite on a range of scales that demonstrate replacement of the sedimentary rocks and link to the development of an extensive metamorphic halo in the country rocks.This halo is much narrower over the main body of the intrusion,and these observations have implications for the thermal history of the intrusion.Mg-skarns and breccias are developed in the roof of the main body of the intrusion.Within the intrusion,the taxitic rocks contain vesicles and the blebby sulfides developed in the picritic and taxitic gabbrodolerites appear to have a linkage to volatile phases.Cuprous sulfide mineralization developed at the roof of the Kharaelakh Intrusion is associated with metamorphosed and skarn-bearing country rocks,and appears to have been generated by a combination of sulfide fractionation and associated metasomatism.The geological relationships appear consistent with a chonolith model for the development of the differentiated intrusion and mineralization,but the extent of metasmorphism of the country rocks appears to be related to the unusual thickness of gabbrodolerite apophyses at the flanks of the intrusion rather than metamorphism produced by the passage of mafic magma through the intrusion.Variations in disseminated sulfide compositions and metasomatic textures in the skarns are described,and a model is proposed which balances traditional views on the evolution of the magma conduits with the impact of magmatic fluids transported through the magma column(i.e.transmagmatic fluids).The importance of structures in controlling the nature of the conduit,and the resultant small intrusions with excess sulfide is a feature of many other Ni-Cu sulfide deposits including Voisey′s Bay,and it is suggested that the sulfides are more likely to have beentransported from depth into their final resting place rather than developed by in-situ equilibration of sulfide with fresh magma in the chonolith.     

Geochemical Characteristics and Metallogenesis of the Qingkuangshan Ni‐Cu‐PGE Mineralized Mafic‐Ultramafic Intrusion in Huili County,Sichuan Province,SW China

The Qingkuangshan Ni-Cu-PGE deposit, located in the Xiaoguanhe region of Huili County, Sichuan Province, is one of several Ni-Cu-PGE deposits in the Emeishan Large Igneous Province (ELIP). The ore-bearing intrusion is a mafic-ultramafic body. This paper reports major elements, trace elements and platinum-group elements in different types of rocks and sulfide-mineralized samples in the intrusion. These data are used to evaluate the source mantle characteristics, the degree of mantle partial melting, the composition of parental magma and the ore-forming processes. The results show that Qingkuangshan intrusion is part of the ELIP. The rocks have trace element ratios similar to the coeval Emeishan basalts. The primitive mantle-normalized patterns of Ni-Cu-PGE have positive slopes, and the ratios of Pd/Ir are lower than 22. The PGE compositions of sulfide ores and associated rocks are characterized by Ru depletion. The PGE contents in bulk sulfides are slightly depleted relative to Ni and Cu, which is similar to the Yangliuping Ni-Cu-PGE deposit. The composition of the parental magma for the intrusion is estimated to contain about 14.65 wt% MgO, 48.66 wt% SiO2 and 15.48 wt% FeOt, and the degree of mantle partial melting is estimated to be about 20%. In comparison with other typical Ni-Cu-PGE deposits in the ELIP, the Qingkuangshan Ni-Cu-PGE deposit has lower PGE contents than the Jinbaoshan PGE deposit, but has higher PGE contents than the Limahe and Baimazhai Ni-Cu deposit, and has similar PGE contents to the Yangliuping Ni-Cu-PGE deposit. The moderate PGE depletions in the bulk sulfide of the Qingkuanghan deposit suggest that the parental magma of the host intrusion may have undergone minor sulfide segregation at depth. The mixing calculations suggests that an average of 10% crustal contamination in the magma, which may have been the main cause of sulfide saturation in the magma. We propose that sulfide segregation from a moderately PGE depleted magma took place prior to magma emplacement at Qingkuangshan, that small amounts of immiscible sulfide droplets and olivine and chromite crystals were suspended in the ascending magma, and that the suspended materials settled down when the magma passed trough the Qingkuangshan conduit. The Qingkuangshan sulfide-bearing intrusion is interpreted to a feeder of Emeishan flood basalts in the region.     

Ore Genesis for Stratiform Ore Bodies of the Dongfengnanshan Copper Polymetallic Deposit in the Yanbian Area, NE China：Constraints from LA-ICP-MS in situ Trace Elements and Sulfide S–Pb Isotopes

The Dongfengnanshan Cu polymetallic deposit is one representative deposit of the Tianbaoshan ore district in the Yanbian area, northeast(NE) China. There occur two types of ore bodies in this deposit, the stratiform ore bodies and veintype ones, controlled by the Early Permian strata and the Late Hercynian diorite intrusion, respectively. Due to the ambiguous genetic type of the stratiform ore bodies, there has been controversy on the relationship between them and veintype ore bodies. To determine the genetic type of stratiform ore bodies, laser ablation inductively coupled plasma mass spectrometry(LA-ICP-MS) in situ trace elements and S–Pb isotope analysis have been carried on the sulfides in the stratiform ore bodies. Compared with that in skarn, Mississippi Valley-type(MVT), and epithermal deposits, sphalerite samples in the stratiform ore bodies of the Dongfengnanshan deposit are significantly enriched in Fe, Mn, and In, while depleted in Ga, Ge, and Cd, which is similar to the sphalerite in volcanic-associated massive sulfide(VMS) deposits. Co/Ni ratio of pyrrhotites in the stratiform ore bodies is similar to that in VMS-type deposits. The concentrations of Zn and Cd of chalcopyrites are similar to those of recrystallized VMS-type deposits. These characteristics also reflect the intermediate ore-forming temperature of the stratiform ore bodies in this deposit. Sulfur isotope compositions of sulfides are similar to those of VMS-type deposits, reflecting that sulfur originated from the Permian Miaoling Formation. Lead isotope compositions indicate mixed-source for lead. Moreover, the comparison of the Dongfengnanshan stratiform ore bodies with some VMStype deposits in China and abroad, on the trace elements and S–Pb isotope characteristics of the sulfides reveals that the stratiform ore bodies of the Dongfengnanshan deposit belong to the VMS-type, and have closely genetic relationship with the early Permian marine volcanic sedimentary rocks.     

Columnar joints in the Patino Formation sandstones, Eastern Paraguay： a dynamic interaction between dyke intrusion, quartz dissolution and cooling-induced fractures

The Patiho Formation sandstones, which crop out in Aregud neighborhood in Eastern Paraguay and show columnar joints near the contact zone with a nephelinite dyke, have as their main characteristics the high pro- portion of syntaxial quartz overgrowth and a porosity originated from different processes, initially by dissolu- tion and later by partial filling and fracturing. Features like the presence of floating grains in the syntaxial cement, the transitional interpenetrative contact between the silica-rich cement and grains as well as the intense fracture porosity are strong indications that the cement has been formed by dissolution and reprecipita- tion of quartz from the framework under the effect of thermal expansion followed by rapid contraction. The increase of the silica-rich cement towards the dyke in association with the orthogonal disposition of the columns relative to dyke walls are indicative that the igneous body may represent the main heat source for the interstitial aqueous solutions previously existing in the sediments. At macroscopic scale, the increasing of inter- nal tensions in the sandstones is responsible for the nucleation of polygons, leading to the individualization of prisms, which are interconnected by a system of joints, formed firstly on isotherm surfaces of low tem- perature and later on successive adjacent planes towards the dyke heat source.     

GEOCHEMICAL CHARACTERISTICS OF PLATINUM GROUP ELEMENTS IN JINCHUAN SUPER-LARGE SULFIDE COPPER-NICKEL DEPOSIT, JINCHANG CITY, GANSU PROVINCE, CHINA

The platinum-group element geochemistry of rocks and ores from Jinchuan super-large copper-nickel sulfide deposit is systemically studied in this paper. The Cu/Pd mean ratio of Jinchuan intrusion is lower than that of original mantle magma, which indicates that these ultrabasic rocks were crystallized from magma that lost Pd in the form of melting segregation of sulfides. The PGE of the rocks show trend of partial melting, similar to that of mantle peridotite, which shows that magma formation occurs during rock-forming and ore-forming processes. The chondrite normalized PGE patterns of the rocks and ores are well related to each other, which signifies the signatures of multi-episode magmatic intrusion, melting and differentiation in the formation processes of rocks and ores. In addition, analyses about the relation between PGE and S, and study on Re-Os isotopes indicate that few contamination of the crustal substances occurred during the magmatic intrusion and the formation of deposit. However, contamination by crustal substances helps to supply part of the S for the enrichment of PGE. Meanwhile, the hydrothermal process is also advantageous for the enrichment of PGE, especially lbr Pt and Pd, due to deep melting segregation. The characteristic parameters （such as Pt/（Pt＋Pd）, （Pt＋Pd）/（Ru＋Ir＋Os）, Pd/Ir, Cu/（Ni＋Cu）, and so on.） for platinum-group elements for Jinchuan sulfide copper-nickel deposit show the same features as those for sulfide copper-nickel deposit related to basic magma, which also illustrates its original magma property representative of Mg-high tholeiite. Therefore, it is the marie （not ultramafic） magma that resulted in the formation of the superlarge sulfide copper-nickel deposit enriched in Cu and PGE. To sum up, the geochemical characteristics of platinum-group elements in rocks and ores from Jinchuan copper-nickel sulfide deposit are constrained by the continental rift tectonic environment, the parent magma features, the enriched mantel magma source, the complex metallogenesis and PGE geochemical signatures, and this would be rather significant for the study about the genetic mechanism of copper-nickel sulfide deposits.     

Comparative Study of Gacun and Youre Silver–Lead–Zinc–Copper Deposits in Sichuan, SW China, and their Mineralization Significance

The large Gacun silver–lead–zinc–copper deposit in Sichuan Province is one of the largest volcanogenic massive sulfide(VMS) deposits in China. The deposit consists of western and central ore bodies, which form a vein–stockwork mineralization system corresponding to hydrothermal channels, and eastern ore bodies, which form an exhalative chemical sedimentary system derived from a brine pool in a submarine basin. The Youre lead–zinc deposit, which is currently under exploration and lies adjacent to the southern part of the Gacun deposit, is characterized by intense silicification and vein–stockwork structures and consists of massive silicified rhyolitic volcanics, banded rhyolitic tuff, and phyllitic sericite tuff. From a comparison of their ore-bearing horizons, the Gacun and Youre deposits have a continuous and stable hanging wall(calcareous slate and overlying andesite) and foot wall(rhyolite–dacite breccia and agglomerate), and the lithologic sequence includes lower intermediate to felsic rocks and upper felsic rocks. Thus, the Youre deposit, which comprises relatively thinly layered low–grade ore, is regarded as forming a southward extension of the Gacun deposit. A further comparison of the structures of the ore-bearing belts between the two deposits suggests that the Youre ore bodies are similar to the western ore bodies of the Gacun deposit. Moreover, the characteristics of fluid inclusions and stable isotopes in the Youre deposit are also similar to those of the western ore bodies of the Gacun deposit. Genetic models of the deposits are proposed for the Gacun–Youre ore district, and massive concealed ore bodies may occcur in the Youre deposit at depths that are similar to those of the eastern ore bodies of the Gacun deposit.     

Time scales and length scales in magma ?ow pathways and the origin ofmagmatic Ni-Cu-PGE ore deposits

Ore forming processes involve the redistribution of heat, mass and momentum by a wide range of processes operating at different time and length scales. The fastest process at any given length scale tends to be the dominant control. Applying this principle to the array of physical processes that operate within magma flow pathways leads to some key insights into the origins of magmatic Ni-Cu-PGE sulfide ore deposits. A high proportion of mineralised systems, including those in the super-giant Noril'sk-Talnakh camp, are formed in small conduit intrusions where assimilation of country rock has played a major role. Evidence of this process is reflected in the common association of sulfides with varitextured contaminated host rocks containing xenoliths in varying stages of assimilation. Direct incorporation of S-bearing country rock xenoliths is likely to be the dominant mechanism for generating sulfide liquids in this setting. However, the processes of melting or dissolving these xenoliths is relatively slow compared with magma flow rates and, depending on xenolith lithology and the composition of the carrier magma, slow compared with settling and accumulation rates. Chemical equilibration between sulfide droplets and silicate magma is slower still, as is the process of dissolving sulfide liquid into initially undersaturated silicate magmas. Much of the transport and deposition of sulfide in the carrier magmas may occur while sulfide is still incorporated in the xenoliths, accounting for the common association of magmatic sulfide-matrix ore breccias and contaminated "taxitic" host rocks. Effective upgrading of so-formed sulfide liquids would require repetitive recycling by processes such as reentrainment, back flow or gravity flow operating over the lifetime of the magma transport system as a whole. In contrast to mafic-hosted systems, komatiite-hosted ores only rarely show an association with externally-derived xenoliths, an observation which is partially due to the predominant formation of ores in lava flows rather than deep-seated intrusions, but also to the much shorter timescales of key component systems in hotter, less viscous magmas. Nonetheless, multiple cycles of deposition and entrainment are necessary to account for the metal contents of komatiite-hosted sulfides. More generally, the time and length scale approach introduced here may be of value in understanding other igneous processes as well as non-magmatic mineral systems.     

Ore Genesis of the Kalatongke Cu–Ni Sulfide Deposits, Western China: Constraints from Volatile Chemical and Carbon Isotopic Compositions

The Kalatongke Cu–Ni sulfide deposits located in the East Junggar terrane, northern Xinjiang, western China are the largest magmatic sulfide deposits in the Central Asian Orogenic Belt (CAOB). The chemical and carbon isotopic compositions of the volatiles trapped in olivine, pyroxene and sulfide mineral separates were analyzed by vacuum stepwise-heating mass spectrometry. The results show that the released volatiles are concentrated at three temperature intervals of 200–400°C, 400–900°C and 900–1200°C. The released volatiles from silicate mineral separates at 400–900°C and 900–1200°C have similar chemical and carbon isotopic compositions, which are mainly composed of H2O (av. ~92 mol%) with minor H2, CO2, H2S and SO2, and they are likely associated with the ore-forming magmatic volatiles. Light δ13CCO2 values (from ?20.86‰ to ?12.85‰) of pyroxene indicate crustal contamination occurred prior to or synchronous with pyroxene crystallization of mantle-derived ore-forming magma. The elevated contents of H2 and H2O in the olivine and pyroxene suggest a deep mantle-originated ore-forming volatile mixed with aqueous volatiles from recycled subducted slab. High contents of CO2 in the ore-forming magma volatiles led to an increase in oxygen fugacity, and thereby reduced the solubility of sulfur in the magma, then triggered sulfur saturation followed by sulfide melt segregation; CO2 contents correlated with Cu contents in the whole rocks suggest that a supercritical state of CO2 in the ore-forming magma system under high temperature and pressure conditions might play a key role in the assemblage of huge Cu and Ni elements. The volatiles released from constituent minerals of intrusion 1# have more CO2 and SO2 oxidized gases, higher CO2/CH4 and SO2/H2S ratios and lighter δ13CCO2 than those of intrusions 2# and 3#. This combination suggests that the higher oxidation state of the volatiles in intrusion 1# than intrusions 2# and 3#, which could be one of key ore-forming factors for large amounts of ores and high contents of Cu and Ni in intrusion 1#. The volatiles released at 200–400°C are dominated by H2O with minor CO2, N2+CO and SO2, with δ13CCO2 values (?25.66‰ to ?22.98‰) within the crustal ranges, and are considered to be related to secondary tectonic– hydrothermal activities.     

Diagenetic and Mineralization Age of the Hehuaping Tin-polymetallic Orefield, Hunan Province

The Hehuaping tin deposit is a large deposit found in recent years during geological surveys. The discovered tin deposit includes not only rock-alteration type deposits in fault zones, but also deposits developed in interstratified rupture zones between Devonian carbonate rocks (Qiziqiao Formation) and sandstone (Tiaomajian Formation). The finding of tin deposits of the latter type has greatly enriched tin-mineralization types in the famous Nanling polymetallic metallogenetic region and may provide us with a new potential orientation for prospecting of tin deposits in the region. It is commonly believed that the forming of the tin deposits in the Nanling region should be related to the Yanshanian instead of Indosinian granitic magmatism. Systematical zircon U-Pb SHRIMP dating in this paper shows that tin mineralizations have endured at least two stages. The early stage should be related to the intrusion of the main body of the Wangxianling granite, which was emplaced during the Indosinian period with a diagenetic and mineralized age of 224.0±1.9 Ma (MSWD=0.54), and the late stage should be related to the intrusion of Yanshanian granitic porphyry that took place after 142±3 Ma (MSWD=0.5).     

Numerical Simulation of Fluid Migration during Ore Formation of Carboniferous Exhalation-Sedimentary Massive Sulfide Deposits in the Tongling District, Anhui Province

Numerical simulation of fluid migration during the ore-forming process of the Carboniferous exhalationsedimentary (Sedex) massive sulfide deposits in the Tongling district shows that fluid and thermal activities in lying-wall rocks were limited to a small area around the main draining passage, which led to weak mineralization and alteration in the lying-wall rock. Temperature and fluid fields indicate that mineralization and alteration in the lying-wall rock of the Sedex-type deposits are usually weaker than those of volcano-hosted massive sulfide deposits. Fluid migration involves the following processes: seawater penetrating and leaching the lying-wall rocks, then mixing with ascending hydrothermal fluids in the main draining passage, and finally jetting into seafloor. Although fluid activity-influenced area is rather small,the content of metals leached out from the lying-wall rocks is high enough to form large-scale ore deposits. Tensional contemporaneous faults accompanied with strong heat flows controlled the formation and distribution of Sedex deposits.The tensional tectonic regime on the northern margin of the Yangtze block during the Hercynian provided Sedex deposits with a prerequisite geodynamic condition.     

中国吉林长白山地区地幔捕虏体中硫化物熔体包裹体

Mantle xenoliths are common in the Cenozoic basalts of the Changbaishan District,Jilin Province,China.Sulfide assemblages in mantle minerals can be divided into three types:isolated sulfide grains,sulfide-meh inclusions and filling sulfides in fractures.Sulfide-meh inclusions occur as single-phase sulfides,sulfide-silicate melt,and CO_2-sulfide-silicate melt inclusions. Isolated sulfide grains are mainly composed of pyrrhotite,but cubanite was found occasionally.Sulfide-meh inclusions are mainly composed of pontlandite and MSS,with small amounts of chalcopyrite and talnakhite.The calculated distribution coefficient K_(D3)for lherzolite are similar to that of mean experimental value.The bulk sulfides in lherzolite were in equilibrium with the enclosing minerals, indicating immiscible sulfide melts captured in partial melting of upper mantle.Sulfide in fractures has higher Ni/Fe and(Fe Ni)/S than those of sulfide melt inclusions.They might represent later metasomatizing fluids in the mantle.Ni/Fe and(Fe Ni)/S increase from isolated grains,sulfide inclusions to sulfides in fractures.These changes were not only affected by temperature and pressure,hut by geochemistry of Ni,Fe and Cu,and sulfur fugacity as well.     

Geological Fluid Mapping in the Tongling Area： Implications for the Paleozoic Submarine Hydrothermal System in the Middle-Lower Yangtze Metallogenic Belt, East China

The Tongling area is one of the 7 ore-cluster areas in the Middle-Lower Yangtze metallogenic belt,East China,and has tectonically undergone a long-term geologic history from the late Paleozoic continental rifting,through the Middle Triassic continent-continent collision to the Jurassic-Cretaceous intracontinental tectono-magmatic activation.The Carboniferous sedimentary-exhalative processes in the area produced widespread massive sulfides with ages of 303-321 Ma,which partly formed massive pyrite-Cu deposits,but mostly provided significant sulfur and metals to the skarn Cu mineralization associated with the Yanshanian felsic intrusions. To understand the Carboniferous submarine hydrothermal system,an area of about 1046 km~2 was chosen to carry out the geological fluid mapping.Associated with massive sulfide formation,footwall sequences 948 m to 1146m thick,composed of the Lower Silurian-Upper Devonian sandstone,siltstone and thin-layered shale,were widely altered.This hydrothermal alteration is interpreted to reflect large- scale hydrothermal fluid flow associated with the late Paleozoic crustal rifting and subsidence.Three hydrothermal alteration types,i.e.,deep-level semiconformable silicification(S_1),fracture-controlled quartz-sericite-pyrite alteration(S_(2-3)),and upper-level sub-discordant quartz-sericite-chlorite alteration(D_3),were developed to form distinct zones in the mapped area.About 50-m thick semiconformable silicification zones are located at～1-km depth below massive sulfides and developed between an impermeable shale caprock(S_1)and the underlying Ordovician unaltered limestone. Comparisons with modern geothermal systems suggest that the alteration zones record a sub-seafloor aquifer with the most productive hydrothermal fluid flow.Fracture-controlled quartz-sericite-pyrite alteration formed transgressive zones,which downward crosscut the semiconformable alteration zones, and upwards grade into sub-discordant alteration zones that enveloped no economic stringer- stockwork zones beneath massive sulfides.This transgressive zone likely marks an upflow path of high- flux fluids from the hydrothermal aquifer.Lateral zonation of the sub-discordant alteration zones and their relationship to overlying massive sulfide lenses suggest lateral flows and diffusive discharging of the hydrothermal fluids in a permeable sandstone sequence.Three large-sized,14 middle-small massive sulfide deposits,and 40 massive sulfide sites have been mapped in detail.They show regional strata- bound characters and two major styles,i.e.,the layered sheet plus strata-bound stringer-style and the mound-style.Associated exhalite and chemical sedimentary rock suites include(1)anhydrite-barite,(2) jasper-chert,(3)Mg-rich mudstone-pyrite shale,(4)barite lens,(5)siderite-Fe-bearing dolomite,and (6)Mn-rich shale-mudstone,which usually comprise three sulfide-exhalite cyclic units in the area. The spatial distribution of these alteration zones(minerals)and associated massive sulfides and exhalites,and regional variation inδ~(34)S of hydrothermal pyrite and inδ~(18)O-δ~(34)C of hanging wall carbonates,suggest three WNW-extending domains of fluid flow,controlled by the basement faults and syn-depositional faults.Each fluid domain appears to have at least two upflow zones,with estimated even spacing of about 5-8 km in the mapped area.The repeated appearance of sulfide-sulfate or sulfide-carbonate rhythmic units in the area suggests episodically venting of fluids through the upflow conduits by breaking the overlying seals of the hydrothermal aquifer.     

Dynamic Magma Conduit System Related to the Jinchuan Ni-Cu Sulfide Deposit, NW China

The Jinchuan Ni-Cu sulfide deposits, NW China, are hosted in small ultramafic intrusions that were emplaced into Paleoproterozoic metamorphic rocks. The ultramafic intrusions were previously thought to be the segments of a single elongate intrusion that was dismembered by late faults into eastern and western portions, each of which have distinct stratigraphic sequences.     

Geochemical and geochronological characteristics of the Um Rus granite intrusion and associated gold deposit,Eastern Desert,Egypt

The Um Rus tonalite-granodiorite intrusion(~6 km2)occurs at the eastern end of the Neoproterozoic,ENE-trending Wadi Muba rak shear belt in the Central Eastern Desert of Egypt.Gold-bearing quartz veins hosted by the Um Rus intrusion were mined intermittently,and initially by the ancient Egyptians and until the early 1900 s.The relationship between the gold mineralization,host intrusion,and regional structures has always been unclear.We present new geochemical and geochronological data that help to define the tectonic environment and age of the Um Rus intrusion.In addition,field studies are integrated with EPMA and LA-ICP-MS data for gold-associated sulfides to better understand the formation and distribution of gold mineralization.The bulk-rock geochemical data of fresh host rocks indicate a calc-alkaline,metaluminous to mildly peraluminous,I-type granite signature.Their trace element composition reflects a tectonic setting intermediate between subduction-related and within-plate environments,presumably transitional between syn-and post-collisional stages.The crystallization age of the Um Rus intrusion was determined by in situ SHRIMP 206 Pb/238 U and 207Pb/235U measurements on accessory monazite grains.The resultant monazite U-Pb weighted mean age(643±9 Ma;MSWD 1.8)roughly overlaps existing geochronological data for similar granitic intrusions that are confined to major shear systems and are locally associated with gold mineralization in the Central Eastrn Desert(e.g.,Fawakhir and Hangaliya).This age is also consistent with magmatism recognized as concomitant to transpressional tectonics(D2:~650 Ma)during the evolution of the Wadi Mubark belt.Formation of the gold-bearing quartz veins in NNE-SSW and N-S striking fault segments was likely linked to the change from transpressional to transtensional tectonics and terrane exhumation(D3:620-580 Ma).The development of N-S throughgoing fault arrays and dike swarms(~595 Ma)led to heterogeneous deformation and recrystallization of the mineralized quartz veins.Ore minerals in the auriferous quartz veins include ubiquitous pyrite and arsenopyrite,with less abundant pyrrhotite,chalcopyrite,sphalerite,and galena.Uncommon pentlandite,gersdorffite,and cobaltite inclusions hosted in quartz veins with meladiorite slivers are interpreted as pre-ore sulfide phases.The gold-sulfide paragenesis encompasses an early pyrite-arsenopyrite±loellingite assemblage,a transitional pyrite-arsenopyrite assemblage,and a late pyrrhotite-chalcopyrite-sphalerite±galena assemblage.Free-milling gold/electrum grains(10 sμm-long)are scattered in extensively deformed vein quartz and in and adjacent to sulfide grains.Marcasite,malachite,and nodular goethite are authigenic alteration phases after pyrrhotite,chalcopyrite,and pyrite and arsenopyrite,respectively.A combined ore petrography,EPMA,and LA-ICP-MS study distinguishes morphological and compositional differences in the early and transitional pyrites(PyⅠ,PyⅡ)and arsenopyrite(ApyⅠ,ApyⅡ).Py I forms uncommon small euhedral inclusions in later PyⅡand Apy II.PyⅡforms large subhedral crystals with porous inner zones and massive outer zones,separated by narrow As-rich irregular mantles.The Fe and As contents in PyⅡare variable,and the LA-ICP-MS analysis shows erratic concentrations of Au(<1 to 177 ppm)and other trace elements(e.g.,Ag,Te,and Sb)in the porous inner zones,most likely related to discrete sub-microscopic sulfide inclusions.The outer massive zones have a rather homogenous composition,with consistently lower abundances of base metals and Au(mean 1.28 ppm).The early arsenopyrite(Apy I)forms fine-grained euhedral crystals enriched in Au(mean 17.7 ppm)and many other trace elements(i.e.,Ni,Co,Se,Ag,Sb,Te,Hg,and Bi).On the other hand,ApyⅡoccurs as coarsegrained subhedral crystals with lower and less variable concentrations of Au(mean 4 ppm).Elevated concentrations of Au(max.327 ppm)and other trace elements are measured in fragmented and aggregated pyrite and arsenopyrite grains,whereas the undeformed intact zones of the same grains are poor in all trace elements.The occurrence of gold/electrum as secondary inclusions in deformed pyrite and arsenopyrite crystals indicates that gold introduction was relatively late in the paragenesis.The LAICP-MS results are consistent with gold redistribution by the N-S though-going faults/dikes overprinted the earlier NNW-SSE quartz veins in the southeastern part of the intrusion,where the underground mining is concentrated.Formation of the Um Rus intrusion and gold-bearing quartz veins can be related to the evolution of the Wadi Mubarak shear belt,where the granitic intrusion formed during or just subsequent to D2 and provided dilatation spaces for gold-quartz vein deposition when deformed by D3 structures.     

Tungsten Enrichment in the South China—type Massive Sulphide Deposits

Tungsten is a characteristic element of the South China-type massive sulphide deposits that were formed on the continental crust.The high contents of tungsten in these deposits are attributed to the pri-mary enrichment of this element in the basement sequences of the region,providing an indication of the tungsten-enrichment in the continental crust.Tungsten in thd basement sequences was mobilized and trans-ported to the massive sulphides by a combination of different geological processes such as terrigenous sedimentation,submarine hydrothermal deposition and magmatic hydrothermal superimposition.     

Geochemical Styudy of Gold and Arsenic Mineralization of the Carlin-Type Gold Deposits,Qinling Region,China

Element geochemistry of gold arsenic and mineralogical features of their sulfides in the Carlin-type gold depostis of the Qinling region are discussed in this paper.The initial contents of ore-forming elements such as glod and arsenic are high the ore-bearing rock series in the Qinling region.Furthermore,both the metals are concentrated mainly in the diagenetic pyrite.Study on the mineralogy of arsenic-bearing sulfide minerals in the ores demonstrated that there is a poistive correlation between gold and arsenic in the sulfide minerals.Available evidence suggests that gold in the As-bearing sulfide minerals in likely to be presented as a charge species(Au ),and it is most possible for it to replace the exxcess arsenic at the site of iron and war probably deposited together with arsenic as solid in the sulfide minerals. Pyrite is composed of(Aux^3 ,Fe1-2^2 )([AsS]x^3-[S2]1-x^2-),and arenopyrite of (Aux^3 ,Fe1-x^3 )([AsS]x^3-[AsS2]1-x^3-).The occurrence of glod in the As-sulfied minerals from the Carlin-type gold depostis in the Qinling region has been confirmed by electron probe and transmission electron microscopic studies.The results show that gold was probably depostied together with arsenicas coupled solid solutions in sulfide minerals in the early stage of mineralization.Metallogenic chemical reactions concerning gold deposition in the Carlin-type As-rich gold deposits would involve oxidation of glod and concurrent reduction of arsenic.Later,the deposited gold as solid was remobilized and redistributed as exsolutions,as a result of increasing hydrothermal alteration and crystallization,and decreasing resistance to refractoriness of the host minerals.Gold occurs as sub-microscopic grains(ranging from 0.04tp 0.16μm in diameter)of native gold along micro factures in and crystalline grains of the sulfiedes.     

Geology, Geochemistry and Minerogenesis of the Shijuligou Zinc–Copper Deposit in Gansu, China

Abstract: The Shijuligou deposit was separated by an arcuate ductile shear zone cross the center of the deposit region, resulting in the difference between the southern and northern ore bodies. The lead (Pb) isotopic data of ores of the Shijuligou copper deposit have averages of 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb in 17.634, 15.444, and 37.312, respectively. It has been shown that ore-forming metals originated from intrusive and extrusive rocks in the upper part of ophiolites. The sulfur isotopic data of pyrite and chalcopyrite in the northern part change from +7.61‰ to +8.09‰ and +4.95‰ to +8.88‰ in the southern part. Isotopes of δ18O in the Shijuligou copper deposit are between +11.1‰ and +18.6‰, with the calculated δ18OH2O at +0.65‰. It is suggested that the mineralized fluid is a mixture of magma fluid, meteorological water, and seawater through circulating and leaching metals from the volcanic rocks. The zircon uranium-lead (U–Pb) dating of gabbro is 457.9±1.2 Ma, and the lower crossing age of the discordant and concordia curves of pyroxene spilite of zircon is 454±15 Ma. It is indicated that the Shijuligou deposit formed in a new ocean crust (ophiolite) of the back-arc basin in the late Ordovician. Mineralization should occur in the intermittence period after strong volcanic activity, and the age should be the late Ordovician. Moreover, the mineralization of ophiolite-hosted massive sulfide deposits in the ancient orogenic belt of the late Ordovician in the northern Qilian Mountains was controlled by the primary fault/fracture, with the forming of a metallogenic hydrothermal system by a mixture of volcanic magma fluid and seawater, which circularly leached the metallogenic metals from the volcanic rocks, resulting in their accumulation. The ore bodies were transformed with morphology and metallogenic elements. Jasperoid is an important sign for prospecting such deposits. There were many island arcs in the continent of China. This study provides evidence for understanding and exploration of ophiolite-hosted massive sulfide deposits in western China, especially in the area of northern Qilian Mountains.     

SHRIMP U-Pb Zircon Age of the Ka''erjiao Intrusion in the Sawur Region in West Junggar,Xinjiang

Acid intrusions are widespread in the Sawur region, Xinjiang. The Ka'erjiao intrusion is mainly composed of albite granite porphyry, K-feldspar granite porphyry, ivernite and granite porphyry. Being a transitional product between magma intrusion and eruption in the Sawur region, the Ka'erjiao intrusion was formed at the telophase of the late Carboniferous to the begining of early Permian as determined by the SHRIMP U-Pb zircon dating, with an age of 302.6±7.6 Ma (1σ). The intrusion consists of alkali-enriched rock, whose REE distribution patterns are of the LREE enrichment type, theδEu value is low and Nd, Sr, Pb isotopes reflect its mantle source characteristics. Theδ18O value of intrusion is low as a result of isotope exchange with meteoric water. The geochemical characteristics show that it was formed in a post-collisional tectonic setting. Taking combined considerations of current studies of A-type granites and Permian volcanic rocks, we think that in the telophase of the late Carboniferous to the beginning of the early Permian, the Sawur region was within the extension or compressional to extensional period of a post-collisional stage. The Ka'erjiao intrusion from mantle sources can confirm the vertical continental crust growth in the late Paleozoic. The Sawur region in west Junggar is consistent with east Junggar in post-collisional tectonic evolution process.     

SHRIMP U-Pb Zircon Age of the Ka''erjiao Intrusion in the Sawur Region in West Junggar,Xinjiang

Acid intrusions are widespread in the Sawur region, Xinjiang. The Ka'erjiao intrusion is mainly composed of albite granite porphyry, K-feldspar granite porphyry, ivernite and granite porphyry. Being a transitional product between magma intrusion and eruption in the Sawur region, the Ka'erjiao intrusion was formed at the telophase of the late Carboniferous to the begining of early Permian as determined by the SHRIMP U-Pb zircon dating, with an age of 302.6±7.6 Ma (1σ). The intrusion consists of alkali-enriched rock, whose REE distribution patterns are of the LREE enrichment type, theδEu value is low and Nd, Sr, Pb isotopes reflect its mantle source characteristics. Theδ18O value of intrusion is low as a result of isotope exchange with meteoric water. The geochemical characteristics show that it was formed in a post-collisional tectonic setting. Taking combined considerations of current studies of A-type granites and Permian volcanic rocks, we think that in the telophase of the late Carboniferous to the beginning of the early Permian, the Sawur region was within the extension or compressional to extensional period of a post-collisional stage. The Ka'erjiao intrusion from mantle sources can confirm the vertical continental crust growth in the late Paleozoic. The Sawur region in west Junggar is consistent with east Junggar in post-collisional tectonic evolution process.     

http://www.sciencedirect.com/science/article/pii/S1674987115000596

Seafloor polymetallic sulfide resources exhibit significant development potential.In 2011,China received the exploration rights for 10,000 km~2 of a polymetallic sulfides area in the Southwest Indian Ocean;China will be permitted to retain only 25%of the area in 2021.However,an exploration of seafloor hydrothermal sulfide deposits in China remains in the initial stage.According to the quantitative prediction theory and the exploration status of seafloor sulfides,this paper systematically proposes a quantitative prediction evaluation process of oceanic polymetallic sulfide resources and divides it into three stages:prediction in a large area,prediction in the prospecting region,and the verification and evaluation of targets.The first two stages of the prediction process have been employed in seafloor sulfides prospecting of the Chinese contract area.The results of stage one suggest that the Chinese contract area is located in the high posterior probability area,which indicates good prospecting potential area in the Indian Ocean.In stage two,the Chinese contract area of 48°-52° E has the highest posterior probability value,which can be selected as the reserved region for additional exploration.In stage three,the method of numerical simulation is employed to reproduce the ore-forming process of sulfides to verify the accuracy of the reserved targets obtained from the three-stage prediction.By narrowing the exploration area and gradually improving the exploration accuracy,the prediction will provide a basis for the exploration and exploitation of seafloor polymetallic sulfide resources.