Sediment-hosted disseminated gold mineralisation at Zarshuran, NW Iran

Mineralisation at the Zarshuran, NW Iran, occurs on the flank of an inlier of Precambrian rocks hosted in black silty calcareous and carbonaceous shale with interbedded dolomite and limestone varying in thickness from 5 to 60 m and extending along strike for approximately 5–6 km. Two major, steeply dipping sets of faults with distinct trends occur in the Zarshuran: (1) northwest (310–325) and (2) southwest (255–265). The main arsenic mineralisation occurs at the intersection of these faults. The mineral assemblage includes micron to angstrom-size gold, orpiment, realgar, stibnite, getchellite, cinnabar, thallium minerals, barite, Au-As-bearing pyrite, base metal sulphides and sulphosalts. Hydrothermal alteration features are developed in black shale and limestone around the mineralisation Types of alteration include: (1) decalcification, (2) silicification, (3) argillisation, (4) dolomitisation, (5) oxidation and acid leaching and (6) supergene alteration. The early stage of mineralisation involved removal of carbonates from the host rocks, followed by quartz precipitation. The main stage includes massive silicification associated with argillic alteration. In the late stage veining became more dominant and the main arsenic ore was deposited along fault cross cuts and gouge. These characteristics are typical of Carlin-type sediment-hosted disseminated gold deposits. The early stage of mineralisation contains only two-phase aqueous fluid inclusions. The main stage has two groups of three-phase CO₂-bearing inclusions with minor CH₄ ± N₂, associated with high temperature, two-phase aqueous inclusions. During the late stage, fluids exhibit a wide range in composition, salinity and temperature, and CH₄ becomes the dominant carbonic fluid with minor CO₂ associated with a variety of two-phase aqueous fluid inclusions. The characteristics of fluids at the Zarshuran imply the presence of at least two separate fluids during mineralisation. The intersections of coexisting carbonic and aqueous inclusion isochores, together with stratigraphic and mineral stability evidence, indicate that mineralisation occurred at 945 ± 445 bar and 243 ± 59 °C, implying a depth for mineralisation of at least 3.8 ± 1.8 km (assuming a lithostatic pressure gradient). Fluid density fluctuations and the inferred depth of formation suggest that the mineralisation occurred at the transition between overpressured and normally pressured regimes. Geochronologic studies utilising K/Ar and Ar/Ar techniques on hydrothermal argillic alteration (whole rock and separated clay size fractions) and on volcanic rocks, indicates that mineralisation at Zarshuran formed at 14.2 ± 0.4 Ma, and was contemporaneous with nearby Miocene volcanic activity, 13.7 ± 2.9 Ma. It is proposed that mineralisation was the result of the infiltration of hydrothermal fluids containing a magmatic gas component, and that it was localised in the Zarshuran Unit because of the redox boundary that it provided and/or because it lay between an overpressured region at depth and a zone of circulating, hydrostatically pressured fluids above. Received: 10 December 1997 / Accepted: 5 March 1999     

Mineralogy,geochemistry, and structural controls of a disseminated gold-bearing alteration halo around the schist-hosted Bullendale orogenic gold deposit,New Zealand

Orogenic gold-bearing quartz veins in the middle Tertiary Bullendale Fault Zone, New Zealand were mined historically for coarse gold in a narrow zone (ca. 5 m thick). However, recent drilling has revealed a broad hydrothermal alteration zone extending into the host schist, in which disseminated sulphide and gold mineralisation has occurred. The evidence of alteration is first seen over 150 m across strike from the fault zone, and the best-developed alteration halo is about 50 m wide. The extent and intensity of alteration is strongly controlled by local structures that developed during regional Tertiary kink folding of the pervasively foliated and fissile metasedimentary schist host. The earliest structures are foliation-parallel microshears (micron to millimeter scale) formed during flexural-slip folding. Later, but related, structures are predominantly normal faults and associated shear zones that have formed extensional sites during the regional folding event. All these structures facilitated hydrothermal fluid penetration and rock alteration, with localised vein formation and brecciation. Where fluid has followed structures, metamorphic chlorite, phengite, and titanite have been altered to hydrothermal ankerite, rutile, and muscovite or kaolinite. Ankerite with Fe/(Fe + Mg) < 0.4 formed in host rocks with Fe/(Fe + Mg) of 0.6, and iron released by ankerite alteration possibly formed pyrite and arsenopyrite that host disseminated gold. Fault zones were extensively silicified and veined with quartz, albite, sulphides, and gold. Host rocks have wide compositional variations because of centimeter-scale metamorphic segregation. However, the alteration halo is characterised by elevated CO₂ and S, as measured by loss-on-ignition (doubled to ca. 6 wt.%), elevated As (100–10,000 ppm), and weakly elevated Sb (up to 14 ppm). Strontium is elevated and Ba depleted in many altered rocks, so Sr/Ba ratio increases from < 1 (host rocks) to > 3 in the most altered and silicified rocks. Many altered and mineralised rocks have low Sr/Ba (< 0.5) as well. The subtle geochemical signature is not useful as a vector to ore because of the strong microstructural control on alteration. Likewise, there is no evidence for spatial mineralogical zonation across the alteration halo, although the most intense alteration is centred on the main fault zone, and intensity of alteration is controlled by microstructures at all scales. As documented in previous studies, hydrothermal alteration haloes enlarge the exploration target for some orogenic gold deposits, and may include disseminated gold, as in this Bullendale example.     

Synchronous deformation and hydrothermal activity in the shear zone hosted high-sulphidation Au-Cu deposit at Peak Hill, NSW, Australia

Altered and mineralised rocks at Peak Hill, are confined to a 300–500 m wide, north-south striking, steeply dipping, shear zone that is flanked by the Mingelo Volcanics along its western side, and Cotton Formation siltstones along its eastern side. This shear zone is defined by extensive zones of cataclasite and strongly foliated micaceous schists in marked contrast to the largely undeformed nature of the adjacent rocks. Advanced argillic assemblages (quartz-kaolinite-pyrite ± alunite ± illite) occur throughout the core of the Peak Hill deposit. Propylitic assemblages, including albite, quartz, interlayered chlorite-smectite, illite and ankerite, and a narrow discontinuous zone of argillic (quartz-illite-pyrite) alteration are developed in the Mingelo Volcanics along the western side of the deposit. Propylitic, argillic and advanced argillic assemblages are overprinted by an internally zoned phase of phyllosilicate alteration that grades inwards from a peripheral sericite-clay-chlorite assemblage, through phyllic assemblages (muscovite/illite-pyrite ± paragonite) to a pyrophyllite-pyrite ± diaspore ± andalusite altered core. Au-Cu mineralisation is hosted by barite-pyrite veins that cut the advanced argillic assemblage, but pre-date the phyllosilicate-dominated alteration. Native Au (lacking Ag), calaverite, Te-rich tennantite-tetrahedrite (goldfieldite), chalcopyrite, covellite and chalcocite occur in the barite-pyrite veins. No ore-bearing minerals were detected in any of the alteration assemblages. The total gold content of the Peak Hill deposit is currently 720 K ounces and this includes 100 K ounces of unmined reserves. Within the shear zone phyllosilicate minerals are developed in strain shadows and partly define the stretching lineation associated with dip-slip movement. The zonation within the phyllosilicate assemblages mimics the geometry of bends in the shear zone and minor internal structures. These textures indicate that the phyllosilicate alteration developed synchronous with movement on the shear zone. Earlier advanced argillic alteration and mineralisation are developed in rocks derived from both sides of the shear zone. Hydrothermal activity associated with the earlier advanced argillic alteration was therefore either synchronous with juxtaposition of these distinct rock units, or occurred during a later phase of movement on the shear zone. Cross-cutting fibrous textures in the auriferous barite-pyrite veins indicate that repeated fracturing of the advanced argillic altered rocks accompanied development of successive generations of auriferous veins. Concentrations of auriferous veins are localised in steeply plunging shoots that are oriented parallel to the stretching lineation in the shear zone. These features all indicate movement on the host shear zone accompanied each phase of hydrothermal activity in the Peak Hill deposit. The location, alteration zonation and distribution of mineralised veins within the deposit are intimately controlled by deformation on the host shear zone synchronous with hydrothermal activity. The development of high-sulphidation hydrothermal systems synchronous with deformation along brittle-ductile shear zones is a predictable consequence of intrusive activity during deformation in areas characterised by a high geothermal gradient. The close relationship between tectonism and hydrothermal activity indicates that these deposits are likely to be located in the vicinity of regional-scale shear zones. Deposits are likely to be aligned parallel to the regional-scale structural “grain” and restricted to areas of conspicuous deformation as is the case at Peak Hill (and Temora, NSW). Aluminous alteration zones concentrated in the vicinity of regional-scale structures in the Carolina Slate Belt may be a further example of this style of hydrothermal activity. Received: 30 September 1996 / Accepted: 28 August 1997     

The geology of the giant Nyankanga gold deposit,Geita Greenstone Belt,Tanzania

Nyankanga is the largest gold deposit in the Geita Greenstone Belt of the northern Tanzania Craton. The deposit is hosted within an Archean volcano-sedimentary package dominated by ironstones and intruded by a large diorite complex, the Nyankanga Intrusive Complex. The supracrustal package is now included within the intrusive complex as roof pendants. The ironstone fragments contain evidence of multiple folding events that occurred prior to intrusion. The supracrustal package and Nyankanga Intrusive Complex are cut by a series of NE–SW trending, moderately NW dipping fault zones with a dominant reverse component of movement but showing multiple reactivation events with both oblique and normal movement components. The deposit is cut by a series of NW trending strike slip faults and ~ E–W trending late normal faults. The Nyankanga Fault Zone is a major NW dipping deformation zone developed mainly along the ironstone–diorite contacts that is mineralised over its entire length. The gold mineralization is hosted within the damage zone associated with Nyankanga Fault Zone by both diorite and ironstone with higher grades typically occurring in ironstone. Ore shoots dip more steeply than the Nyankanga Fault Zone. The mineralization is associated with sulfidation fronts and replacement textures in ironstones and is mostly contained as disseminated sulphides in diorite. The close spatial relationship between gold mineralization and the ironstone/diorite contact suggests that the reaction between the mineralising fluid and iron rich lithotypes played an important role in precipitating gold. Intense brecciation and veining, mainly in the footwall of Nyankanga Fault Zone, indicates that the fault zone increased permeability and allowed the access of mineralising fluids. The steeper dip of the ore shoots is consistent with mineralization during normal reactivation of the Nyankanga Fault Zone.     

Copper mobility in the Eastern Creek Volcanics, Mount Isa, Australia: evidence from laser ablation ICP-MS of iron-titanium oxides

The Palaeoproterozoic Eastern Creek Volcanics are a series of copper-rich tholeiitic basalts which occur adjacent to the giant sediment-hosted Mount Isa copper deposit in Queensland, Australia. The volcanic rocks are often cited as the source of metals for the deposit. New laser ablation ICP-MS analyses of iron–titanium oxides from the basalts provide evidence for the local mobilisation of copper during regional greenschist facies metamorphism. This interpretation is based on the observation that copper-bearing magmatic titanomagnetite was destabilised during greenschist facies metamorphism, and the new magnetite which crystallised was copper poor. Petrological observations, regional geochemical signatures and geochemical modelling suggest that the mobilised copper was concentrated in syn-metamorphic epidote-rich alteration zones, creating a pre-concentration of copper before the main mineralisation event at Mount Isa. Geochemical modelling demonstrates this process is enhanced by the addition of CO₂ from adjacent carbonate-rich sediments during metamorphic devolatilisation. Regional geochemical data illustrate elevated copper concentrations in epidote-rich zones (high CaO), but where these zones are overprinted by potassic alteration (high K₂O), copper is depleted. A two-stage model is proposed whereby after metamorphic copper enrichment in epidote–titanite alteration zones, an oxidised potassium-rich fluid leached copper from the epidote-altered metabasalts and deposited it in the overlying sedimentary rocks to form the Mount Isa copper deposit. This ore-forming fluid is expressed regionally as potassium feldspar-rich veins and locally as biotite-rich alteration, which formed around major fluid conduits between the metabasalt metal source rocks and the overlying deposit host sequence. This model is consistent with the remobilisation of copper from mafic source rocks, as has been found at other world-class copper deposits.Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Contrasting Pb isotopes of Archaean and Palaeoproterozoic sulphide mineralisation, Disko Bugt, central West Greenland

Sulphide separates from mineralisation in Archaean and Palaeoproterozoic host rocks of the Disko Bugt area, central West Greenland, have been analysed for trace elements and Pb isotopes. Isotopic compositions of lead from sulphide separates of Archaean supracrustal rocks show wide variations. Archaean semi-massive sulphides and sulphides separated from felsic metavolcanites yield an errorchron age of 2821 +77/−82, with a model μ₁ value of 7.36; this is comparable to the estimated age of the supracrustal rocks. The two most prominent mineralised sites, the Andersen and Eqip prospects, have their own unique Pb isotope pattern; the Andersen prospect is considered to represent the result of an upper crust of Palaeoproterozoic process. The sulphide separates of Palaeoproterozoic epigenetic mineralisation hosted in shear and fault zones in the supracrustal rocks has a common origin, e.g. linked to a metamorphic peak and/or hydrothermal alteration. Gold-bearing samples indicate a local origin for associated sulphides; no regional processes seem to be involved in the formation of the gold occurrences. Received: 17 March 1997 / Accepted: 8 July 1997     

Woodcutters goldfield: Gold in an Archaean granite,Kalgoorlie, Western Australia

The 43 t (1.4 Moz) of gold in the Woodcutters goldfield 50 km north of Kalgoorlie has wide geological significance in terms of gold in Archaean granite, as well as its local commercial and exploration significance. Woodcutters is already one of the largest Archaean gold systems in granite, and is unusual in being so far laterally from the nearest greenstone belt. Gold in the Federal zone, one of the deposits making up the Woodcutters goldfield, is hosted in hornblende‐biotite granodiorite,6 km from the mapped contact with greenstone. In Federal open pit, the granodiorite is coarse‐grained in the northern half, and a fine‐grained granodiorite in the south, with both hosting gold. These two types of granodiorite are rather similar in both mineralogy and geochemistry. There is also a subordinate fine‐grained monzodiorite. The Federal gold mineralisation is in a northwest‐striking, northeast‐dipping (315° strike/60°E dip) shear zone in the Scotia granite. Variation in grainsize of the host rocks might have affected the style of deformation with more brittle fabrics in the coarse‐grained phase and more ductile fabrics prominent in the fine‐grained granodiorite. Hydrothermal alteration is extensively developed around the Federal deposit and is a useful vector towards gold mineralisation. Distal epidote alteration surrounds a proximal muscovite‐biotite alteration zone that contains quartz‐sulfide veins. The alteration shares some of the common alteration characteristics of Archaean greenstone‐hosted gold, but differs in that carbonate‐chlorite alteration is only weakly developed. This difference is readily explained in terms of host‐rock composition and lower concentrations of Fe, Mg and Ca in the granite compared with greenstone. Fluid‐inclusion studies demonstrate that the fluids associated with the hydrothermal alteration at Woodcutters shared the common characteristics of fluids in Archaean greenstone gold, namely low‐salinity and dominant H₂O–CO₂. Fluid inclusions with moderate salinity were found in one fresh sample away from mineralisation, and are inferred to represent possible magmatic fluid. There is no evidence of a granite‐derived fluid being responsible for gold mineralisation. The granodiorite host rock had cooled, crystallised and had at least started to undergo deformation prior to gold introduction. The distribution of gold mineralisation in the Woodcutters goldfield has the style, shape and orientation comparable with greenstone‐hosted gold deposits in the same region. The northwest trend, the quartz veining and simple pyrite mineralogy are all features common to other greenstone‐hosted gold deposits near Kalgoorlie such as Mt Pleasant. The alteration fluid appears to have penetrated the granite on the scale of many hundreds of metres, causing large‐scale alteration. Woodcutters gold mineralisation resulted from the same metamorphic fluid processes that led to formation of greenstone gold deposits. In this metamorphic model, granitic rocks are predicted to be less‐favourable gold hosts than mafic rocks for two reasons. Granitic rocks do not generally fracture during regional deformation in such a way as to create large‐scale dilation. Furthermore, with less iron and no carbon, granitic rocks have lower potential to precipitate gold from solution by wall‐rock reaction. The metamorphic model predicts that those granite types with higher Fe should host better gold deposits, all other factors being equal. Accordingly, tonalite‐trondhjemite and hornblende‐bearing granodiorite should provide better environments for major gold deposits compared with monzogranite, and granite sensu stricto, as borne out by Woodcutters, but mafic rocks should be better hosts than any of these felsic to intermediate rocks.     

Overprinting porphyry‐type veinlets on the intrusive rocks and phreatomagmatic breccias in the Southwest prospect,southwestern Sto. Tomas II (Philex), Baguio District,Philippines

The Southwest prospect is located at the southwestern periphery of the Sto. Tomas II porphyry copper–gold deposit in the Baguio District, northwestern Luzon, Philippines. The Southwest prospect hosts a copper‐gold mineralization related to a complex of porphyry intrusions, breccia facies, and overlapping porphyry‐type veinlets emplaced within the basement Pugo metavolcanics rocks and conglomerates of the Zigzag Formation. The occurrences of porphyry‐type veinlets and potassic alteration hosted in the complex are thought to be indications of the presence of blind porphyry deposits within the Sto. Tomas II vicinity. The complex is composed of at least four broadly mineralogically similar dioritic intrusive rocks that vary in texture and alteration type and intensity. These intrusions were accompanied with at least five breccia facies that were formed by the explosive brecciation, induced by the magmatic–hydrothermal processes and phreatomagmatic activities during the emplacement of the various intrusions. Hydrothermal alteration assemblages consisting of potassic, chlorite–magnetite, propylitic and sericite–chlorite alteration, and contemporaneous veinlet types were developed on the host rocks. Elevated copper and gold grades correspond to (a) chalcopyrite–bornite assemblage in the potassic alteration in the syn‐mineralization early‐mineralization diorite (EMD) and contemporaneous veinlets and (b) chalcopyrite‐rich mineralization associated with the chalcopyrite–magnetite–chlorite–actinolite±sericite veinlets contemporaneous with the chlorite–magnetite alteration. Erratic remarkable concentrations of gold were also present in the late‐mineralization Late Diorite (LD). High X_Mg of calcic amphiboles (>0.60) in the intrusive rocks indicate that the magmas have been oxidizing since the early stages of crystallization, while a gap in the composition of Al between the rim and the cores of the calcic amphiboles in the EMD and LD indicate decompression at some point during the crystallization of these intrusive rocks. Fluid inclusion microthermometry suggests the trapping of immiscible fluids that formed the potassic alteration, associated ore mineralization, and sheeted quartz veinlets. The corresponding formation conditions of the shallower and deeper quartz veinlets were estimated at pressures of 50 and 30 MPa and temperatures of 554 and 436°C at depths of 1.9 and 1.1 km. Temperature data from the chlorite indicate that the chalcopyrite‐rich mineralization associated with the chlorite–magnetite alteration was formed at a much lower temperature (ca. 290°C) than the potassic alteration. Evidence from the vein offsetting matrix suggests multiple intrusions within the EMD, despite the K‐Ar ages of the potassic alteration in EMD and hornblende in the LD of about the same age at 3.5 ± 0.3 Ma. The K‐Ar age of the potassic alteration was likely to be thermally reset as a result of the overprinting hydrothermal alteration. The constrained K‐Ar ages also indicate earlier formed intrusive rocks in the Southwest prospect, possibly coeval to the earliest “dark diorite” intrusion in the Sto. Tomas II deposit. In addition, the range of δ³⁴S of sulfide minerals from +1.8‰ to +5.1‰ in the Southwest prospect closely overlaps with the rest of the porphyry copper and epithermal deposits in the Sto. Tomas II deposit and its vicinity. This indicates that the sulfides may have formed from a homogeneous source of the porphyry copper deposits and epithermal deposits in the Sto. Tomas II orebody and its vicinity. The evidence presented in this work proves that the porphyry copper‐type veinlets and the adjacent potassic alteration in the Southwest prospect are formed earlier and at a shallower level in contrast with the other porphyry deposits in the Baguio District.     

Sedimentary rock-hosted gold mineralization at Zalaa Uul, Khentii Range, northeastern Mongolia

The recently discovered Zalaa Uul occurrence exhibits gold concentrations averaging about 1 ppm in silicified breccias as wide as 100 m. Most mineralization is hosted in brecciated siltstone, shale, and calcareous sandstone of the Permian Ulz Formation that exhibits multiple stages of silicification. Rock geochemistry indicates: (1) gold is strongly associated with arsenic and silver; (2) antimony, tellurium and thallium are locally anomalous but poorly correlated with gold; (3) mercury is spatially correlated with copper; and (4) Ag:Au ratios are low (≤3). A low-level Cu–(Hg + Sb, ±Au + As) anomaly occurs over an hypothesized feeder breccia. The feeder breccia occupies a major northwest-dipping reverse fault zone between dominantly greenschist-facies phyllite and schist of the Upper Proterozoic Toshint Formation and unmetamorphosed marine clastic rocks of the permian Ulz Formation. Ground magnetometer surveys identified a magnetic body, thought to represent part of an intrusive complex at depth, within the reverse fault zone, down-plunge from the ∼70° northwest-dipping feeder breccia. Altered rhyolite dikes crop out in the vicinity of the feeder breccia. The potentially economic gold grades are 2 to 3 km outboard of the feeder breccia and may represent the distal Au + As zone of an intrusion-related mineralizing system. Alteration, regional structural and geophysical setting, host rocks and trace element geochemistry, and finely disseminated nature of gold particles are similar to Carlin-type gold systems in the Great Basin of the western USA, but local geology, magnetically mapped intrusive bodies, and trace element zonation suggest affinity with some intrusion-related gold systems. Received: 28 February 1999 / Accepted: 3 March 2000     

Magnetite, ilmenite and ulvite in rocks and ore deposits: petrography, microprobe analyses and genetic implications

Summary ?Detailed petrographic studies and microchemical analyses of titanomagnetite from igneous and metamorphic rocks and ore deposits form the basis of this investigation. Its aim is to compare the data obtained and their interpretations with the experimentally deduced subsolidus oxidation-exsolution model of Buddington and Lindsley (1964). The results are also considered relevant for the interpretation of compositional variations in black sands which are recovered for titanium production. The arrangement of the samples investigated is in accordance with textural stages C1 to C5 caused by subsolidus exsolution with increasing degrees of oxidation (Haggerty, 1991). Stage 1 is represented by two types of optically homogeneous TiO₂-rich magnetite: a. An isotropic type considered to represent solid solutions of magnetite and ulvite containing between 5.2 to 27.5 wt% TiO₂ corresponding to about 14.7 to 77.7 mol% Fe₂TiO₄ in solid solution with magnetite. The general formula of this type is Fe²⁺ _1+x Fe³⁺ _2−2x Ti _x O₄ (x = 0.0–1.0). b. The second type which has not been reported so far is anisotropic and shows complex internal twinning resembling inversion textures. It is thus attributed to inversion of a high-temperature ilmenite modification (with statistical distribution of the cations) which forms solid solutions with magnetite. TiO₂ varies between 9.3 and 24.5 wt% corresponding to about 17.2 to 43.6 mol% ilmenite in solid solution with magnetite. This type is interpreted as a cation-deficient spinel with the general formula Fe²⁺ _{12/12 + 1/4x}Fe³⁺ _{24/12 − 3/2x} □ _{0 + 1/4x} Ti _x O₄ (x = 0.0–16/12). Isotropic and anisotropic homogeneous magnetites occur in volcanic rocks only; the homogeneity of the solid solutions was explained by fast cooling which prevented the development of exsolution textures. Stages 2 and 3 are represented by magnetite with or without ulvite. The magnetite host contains ilmenite lamellae forming trellis and sandwich textures. In contrast to the requirement of the oxidation-exsolution model, the ilmenite lamellae are concentrated exclusively in the cores of the host crystals. The reverse host-guest relationship may also occur. Stages 4 and 5 are identical with thermally generated martite (= martite due to heating). The textures are characterized by very broad lamellae of ferrian ilmenite or titanohematite dominantly concentrated along the margins of the host crystals. Thermally generated martite is restricted to subsolidus-oxidation reactions. The ilmenite lamellae of trellis and sandwich textures contain low Fe₂O₃-concentrations (average 4.8 mol%; to a maximum of 8.3), whereas the Fe₂O₃-content of thermally generated martite is between 32 to 71 mol%. With respect to the Fe₂O₃-concentrations in the ilmenite lamellae, no transition between the two types was observed. The results of this paper show that the widely accepted oxy-exsolution model of Buddington and Lindsley (1964) which is based on experimental results can – with the exception of thermally generated martite – not explain the tremendous variety of magnetite–ilmenite–ulvite relationships in natural rocks and ore deposits. Received October 16, 2001; accepted May 2, 2002     

Fe–Cu deposits in the Kangdian region,SW China: a Proterozoic IOCG (iron-oxide–copper–gold) metallogenic province

Numerous Fe–Cu deposits are hosted in the late Paleoproterozoic Dongchuan and Dahongshan Groups in the Kangdian region, SW China. The Dongchuan Group is composed of siltstone, slate, and dolostone with minor volcanic rocks, whereas the Dahongshan Group has undergone lower amphibolite facies metamorphism and consists of quartz mica-schist, albitite, quartzite, marble and amphibolite with local migmatite. Deposits in the Dongchuan Group are commonly localized in the cores of anticlines, in fault bends and intersections, and at lithological contacts. Orebodies are closely associated with breccias, which are locally derived from the host rocks. Fe-oxides (magnetite and/or hematite) and Cu-sulfides (chalcopyrite, bornite) form disseminated, vein-like and massive ores, and typically fill open spaces in the host rocks. The deposits have extensive albite alteration and local K-feldspar alteration overprinted by quartz, carbonate, sericite and chlorite. Deposits in the Dahongshan Group have orebodies sub-parellel to stratification and show crude stratal partitioning of metals. Fe-oxide ores occur as massive and/or banded replacements within the breccia pipes, whereas Cu-sulfide ores occur predominantly as disseminations and veinlets within mica schists and massive magnetite ores. Ore textures suggest that Cu-sulfides formed somewhat later than Fe-oxides, but are possibly within the same mineralization event. Both ore minerals predated regional Neoproterozoic metamorphism. Both orebodies and host rocks have undergone extensive alteration of albite, scapolite, amphibole, biotite, sericite and chlorite. Silica and carbonate alterations are also widespread. Ore-hosting strata have a LA-ICP-MS zircon U–Pb age of 1681 ± 13 Ma, and a dolerite dyke cutting the Fe-oxide orebodies has an age of 1659 ± 16 Ma. Thus, the mineralization age of the Dahongshan deposit is constrained at between the two. All ores from the two groups have high Fe and low Ti, with variable Cu contents. Locally they are rich in Mo, Co, V, and REE, but all are poor in Pb and Zn. Sulfides from the Fe–Cu deposits have δ³⁴S values mostly in the range of +2 to +6 per mil, suggesting a mix of several sources due to large-scale leaching of the strata with the involvement of evaporites. Isotopic dating and field relationships suggest that these deposits formed in the late Paleoproterozoic. Ore textures, mineralogy and alteration characteristics are typical of IOCG-type deposits and thus define a major IOCG metallogenic province with significant implications for future exploration.     

The Wyoming gold deposits: volcanic-hosted lode-type gold mineralisation in the eastern Lachlan Orogen,Australia

The eastern Lachlan Orogen in southeastern Australia is noted for its major porphyry–epithermal–skarn copper–gold deposits of late Ordovician age. Whilst many small quartz vein-hosted or orogenic lode-type gold deposits are known in the region, the discovery of the Wyoming gold deposits has demonstrated the potential for significant lode-type mineralisation hosted within the same Ordovician volcanic stratigraphy. Outcrop in the Wyoming area is limited, with the Ordovician sequence largely obscured by clay-rich cover of probable Quaternary to Cretaceous age with depths up to 50 m. Regional aeromagnetic data define a north–south trending linear belt interpreted to represent the Ordovician andesitic volcanic rock sequence within probable Ordo-Silurian pelitic metasedimentary rocks. Drilling through the cover sequence in 2001 to follow up the trend of historically reported mineralisation discovered extensive alteration and gold mineralisation within an andesitic feldspar porphyry intrusion and adjacent volcaniclastic sandstones and siltstones. Subsequent detailed resource definition drilling has identified a substantial mineralised body associated with sericite–carbonate–albite–quartz–(±chlorite ± pyrite ± arsenopyrite) alteration. The Wyoming deposits appear to have formed as the result of a rheological contrast between the porphyry host and the surrounding volcaniclastic rocks, with the porphyry showing brittle fracture and the metasedimentary rocks ductile deformation. The mineralisation at Wyoming bears many petrological and structural similarities to orogenic lode-style gold deposits. Although the timing of alteration and mineralisation in the Wyoming deposits remain problematic, a relationship with possible early to middle Devonian deformation is considered likely.     

Palaeozoic oolitic ironstone of the French Armorican Massif: a chemical and structural trap for orogenic base metal–As–Sb–Au mineralisation during Hercynian strike-slip deformation

In the Saint-Aubin-des-Chateaux quarry (Armorican Hercynian belt, western France), an epigenetic hydrothermal alteration affects an oolitic ironstone layer intercalated within the Lower Ordovician Grès armoricain Formation. The hydrothermal overprint produced pervasive and massive sulphidation with stratoid pyritised lenticular bodies within the oolitic ironstone layer. These sulphide lenses are spatially associated with strike-slip faults and extend laterally from them. After the massive sulphidation stage (Fe–As, stage 1), subsequent fracturing allowed the deposition of base metals (stage 2) and Pb–Sb–Au (stage 3) parageneses in veins. The dominant brittle structures are vertical extension veins, conjugate shear veins and strike-slip faults of various orders. All these structures are filled with the same paragenetic sequence. Deformation analysis allows the identification of structures that developed incrementally via right-lateral simple shear compatible with bulk strain affecting the Central Armorican Domain. Each increment corresponds to a fracture set filled with specific parageneses. Successive hydrothermal pulses reflect clockwise rotation of the horizontal shortening direction. Geothermometry on chlorite and arsenopyrite shows an input of hot hydrothermal fluids (maximum of 390–350°C) during the main sulphide stage 1. The subsequent stages present a marked temperature drop (300–275°C). Lead isotopes suggest that the lead source is similar for all hydrothermal stages and corresponds to the underlying Neo-Proterozoic basement. Lead isotope data, relative ages of deformation and comparison with neighbouring deposits suggest that large-scale fluid pulses occurred during the whole Hercynian orogeny rather than pulses restricted to the late Hercynian period. The vicinity of the Hercynian internal domain appears as a key control for deformation and fluid flow in the oolitic ironstones, which acted as a chemical and structural trap for the hydrothermal fluids. The epigenetic mineralisation of Saint-Aubin-des-Chateaux appears to be very similar to epigenetic sulphidation described in banded iron formation-hosted gold deposits.     

冀西北铁岩类型与沉积环境

冀西北铁岩的结构和构造类似于碳酸盐岩,因此,借鉴于现代碳酸盐相模式与沉积环境,有可能恢复古代铁岩的沉积环境。本文对铁岩分类及其沉积环境进行了探讨。     

Age constraints on Tarkwaian palaeoplacer and lode-gold formation in the Tarkwa-Damang district, SW Ghana

Two major epigenetic gold-forming events are recorded in the world-class gold province of southwest Ghana. A pre-Tarkwaian event was the source of the world-class Tarkwa palaeoplacers whereas post-Birimian and Tarkwaian deformation, which was related to the Eburnean orogeny, gave rise to the world-class (e.g. Prestea) to giant (e.g. Obuasi) orogenic gold deposits which have made the region famous for more than 2,500 years. A maximum age of 2133±4 Ma for Tarkwaian sedimentation is provided by 71 of 111 concordant SHRIMP II U–Pb dates from detrital zircons in Tarkwaian clastic rocks from Damang and Bippo Bin, northeast of Tarkwa. The overall data distribution broadly overlaps the relatively poorly constrained ages of Birimian volcanism and associated Dixcove-type granitoid emplacement, indicating syntectonic development of the Tarkwaian sedimentary basin. These zircon ages argue against derivation of the palaeoplacer gold from an orogenic gold source related to the compressional phase of an orogeny significantly older than the Eburnean orogeny. Instead, they suggest that the gold source was either orogenic gold lodes related to an earlier compressional phase of a diachronous Eburnean orogeny or ca. 2200–2100 Ma intrusion-related gold lode. The CO₂-rich fluid inclusions in associated vein-quartz pebbles are permissive of either source. At the Damang deposit, an epigenetic, orogenic lode-gold system clearly overprinted, and sulphidised low-grade palaeoplacer hematite–magnetite gold occurrences in the Banket Series conglomerate within the Tarkwaian sedimentary sequence. Gold mineralisation is demonstrably post-peak metamorphism, as gold-related alteration assemblages overprint metamorphic assemblages in host rocks. In alteration zones surrounding the dominant, subhorizontal auriferous quartz veins, there are rare occurrences of hydrothermal xenotime which give a SHRIMP U–Pb age of 2063±9 Ma for gold mineralisation. The similar structural timing of epigenetic gold mineralisation in Tarkwaian host rocks at Damang to that in mainly Birimian host rocks elsewhere in southwest Ghana, particularly at Obuasi, suggests that 2063±9 Ma is the best available age estimate for widespread orogenic gold mineralisation in the region. Argon–argon ages of 2029±4 and 2034±4 Ma for hydrothermal biotite from auriferous quartz veins appear to represent uplift and cooling of the region below about 300 °C, as estimates of the temperature of gold mineralisation are higher, at around 400 °C. If peak metamorphism, with temperatures of about 550 °C, is assumed to have occurred at about 2100 Ma, the biotite ages, in combination with the xenotime age, suggest a broadly constant uplift rate for the region of about 1 km per 10 million years from about 2100 to 2025 Ma.     

Sulfur and lead isotope geochemistry of hypogene mineralization at the Barite Hill Gold Deposit, Carolina Slate Belt, southeastern United States: a window into and through regional metamorphism

The Barite Hill gold deposit, at the southwestern end of the Carolina slate belt in the southeastern United States, is one of four gold deposits in the region that have a combined yield of 110 metric tons of gold over the past 10 years. At Barite Hill, production has dominantly come from oxidized ores. Sulfur isotope data from hypogene portions of the Barite Hill gold deposit vary systematically with pyrite–barite associations and provide insights into both the pre-metamorphic Late Proterozoic hydrothermal and the Paleozoic regional metamorphic histories of the deposit. The δ³⁴S values of massive barite cluster tightly between 25.0 and 28.0‰, which closely match the published values for Late Proterozoic seawater and thus support a seafloor hydrothermal origin. The δ³⁴S values of massive sulfide range from 1.0 to 5.3‰ and fall within the range of values observed for modern and ancient seafloor hydrothermal sulfide deposits. In contrast, δ³⁴S values for finer-grained, intergrown pyrite (5.1–6.8‰) and barite (21.0–23.9‰) are higher and lower than their massive counterparts, respectively. Calculated sulfur isotope temperatures for the latter barite–pyrite pairs (Δ=15.9–17.1‰) range from 332–355 °C and probably reflect post-depositional equilibration at greenschist-facies regional metamorphic conditions. Thus, pyrite and barite occurring separately from one another provide pre-metamorphic information about the hydrothermal origin of the deposit, whereas pyrite and barite occurring together equilibrated to record the metamorphic conditions. Preliminary fluid inclusion data from sphalerite are consistent with a modified seawater source for the mineralizing fluids, but data from quartz and barite may reflect later metamorphic and (or) more recent meteoric water input. Lead isotope values from pyrites range for ²⁰⁶Pb/²⁰⁴Pb from 18.005–18.294, for ²⁰⁷Pb/²⁰⁴Pb from 15.567–15.645, and for ²⁰⁸Pb/²⁰⁴Pb from 37.555–38.015. The data indicate derivation of the ore leads from the country rocks, which themselves show evidence for contributions from relatively unradiogenic, mantle-like lead, and more evolved or crustal lead. Geological relationships, and stable and radiogenic isotopic data, suggest that the Barite Hill gold deposit formed on the Late Proterozoic seafloor through exhalative hydrothermal processes similar to those that were responsible for the massive sulfide deposits of the Kuroko district, Japan. On the basis of similarities with other gold-rich massive sulfide deposits and modern seafloor hydrothermal systems, the gold at Barite Hill was probably introduced as an integral part of the formation of the massive sulfide deposit. Received: 17 August 1998 / Accepted: 12 October 2000     

Lithogeochemical localisation of disseminated gold in the White River area, Yukon, Canada

Gold mineralisation in the White River area, 80 km south of the highly productive Klondike alluvial goldfield, is hosted in amphibolite facies gneisses in the same Permian metamorphic pile as the basement for the Klondike goldfield. Hydrothermal fluid which introduced the gold was controlled by fracture systems associated with middle Cretaceous to early Tertiary extensional faults. Gold deposition occurred where highly fractured and chemically reactive rocks allowed intense water–rock interaction and hydrothermal alteration, with only minor development of quartz veins. Felsic gneisses were sericitised with recrystallisation of hematite and minor arsenic mobility, and extensively pyritised zones contain gold and minor arsenic (ca 10 ppm). Graphitic quartzites (up to 5 wt.% carbon) caused chemical reduction of mineralising fluids, with associated recrystallisation of metamorphic minerals (graphite, pyrrhotite, pyrite, chalcopyrite) in host rocks and veins, and introduction of arsenic (up to 1 wt.%) to form arsenopyrite in veins and disseminated through host rock. Veins have little or no hydrothermal quartz, and up to 19 wt.% carbon as graphite. Late-stage oxidation of arsenopyrite in some graphitic veins has formed pharmacosiderite. Gold is closely associated with disseminated and vein sulphides in these two rock types, with grades of up to 3 ppm on the metre scale. Other rock types in the White River basement rocks, including biotite gneiss, hornblende gneiss, pyroxenite, and serpentinite, have not developed through-going fracture systems because of their individual mineralogical and rheological characteristics, and hence have been little hydrothermally altered themselves, have little hydrothermal gold, and have restricted flow of fluids through the rock mass. Some small post-metamorphic quartz veins (metre scale) have been intensely fractured and contain abundant gold on fractures (up to 40 ppm), but these are volumetrically minor. The style of gold mineralisation in the White River area is younger than, and distinctly different from, that of the Klondike area. Some of the mineralised zones in the White River area resemble, mineralogically and geochemically, nearby coeval igneous-hosted gold deposits, but this resemblance is superficial only. The White River mineralisation is an entirely new style of Yukon gold deposit, in which host rocks control the mineralogy and geochemistry of disseminated gold, without quartz veins.     

Geological setting, mineralogy, geochemistry and genesis of the Middle Archaean Kalyadi copper deposit, western Dharwar craton, southern India

The Kalyadi polymetallic copper deposit occurs within the Middle Archaean (≥3.0 Ga), medium-grade Kalyadi schist belt which consists predominantly of ultramafic-mafic schists interbedded with chemogenic chert, detrital high Al-Mg schists and siliceous schists. This sedimentary exhalative type (SEDEX type) ore-body is the only copper deposit hosted in cherts in the western Dharwar craton. The Kalyadi supracrustal rocks are intruded by tonalite-trondhjemitic gneisses (ca. 3.0 Ga) and granite (ca. 2.6 Ga). The Kalyadi copper deposit is polygenetic in nature. The primary ores represented by disseminations of pyrite ± linneite and chalcopyrite ± magnetite essentially along the bedding lamination of the metachert are referred to as the metamorphosed chert-sulphide rhythmites of a primary stratiform type. The ore is of low-grade and records imprints of at least two events of deformation. Pyrite is characterised by high-Co values (262–4524 ppm) and high–Co/Ni ratios (3.0–19.7). Rare earth element patterns of the primary ores and the host metacherts are identical, characterised by La enrichment, absence of Eu anomalies and flat to depleted HREE patterns with δ ³⁴ S = −0.8‰. The secondary (remobilised) ores are structurally controlled occurring as veins and stringers discordant to the bedding lamination or schistosity. The constituent ores are chalcopyrite-pyrite-pyrrhotite with minor pentlandite. These sulphides with low-Co/Ni ratios (0.87–1.80), have either a strong positive or negative Eu anomaly and show slight HREE enrichment. The δ ³⁴ S value ranges from +2.64 to −4.29‰. It is interpreted that the primary stratiform ores and the cherts were derived from volcanogenic hydrothermal fluids as syngenetic/chemical deposits in a deep sea environment. The secondary epigenetic mineralisation is related to subsequent migmatisation, deformational events and granitic activity. Received: 8 September 1995 / Accepted: 18 November 1996     

Gold mineralisation at the Lady Bountiful Mine,Western Australia: An example of a granitoid-hosted Archaean lode gold deposit

The Lady Bountiful granitoid-hosted lode gold deposit, located in the mid-greenschist facies metamorphosed Ora Banda greenstone sequence, is hosted predominantly by the late-tectonic Liberty Granodiorite. Gold mineralisation is localised along quartz-veined, sinistral, brittle fault-zone(s) that transect the boundary between the Liberty Granodiorite and Mt Pleasant sill. Quartz vein textures indicate two stages of a single gold-related vein-development event, with high-grade gold mineralisation restricted to the second stage. Ore minerals include pyrite, chalcopyrite, pyrrhotite, galena, sphalerite, Au−Ag−Bi−Pb-tellurides, and native gold. Fluid infitration has resulted in narrow (<1 m) bleached wallrock alteration envelopes to the fault zones comprising albite-K-mica ±chlorite±calcite±rutile assemblages. Temperature-pressure conditions varied from Stage I (300°±50°C, ≈2 kbar) to Stage II (250°±50°C, ≈0.5 to 2 kbar), with the hydrothermal fluid in both stages characterised by X(CO₂)≤0.15 and moderate salinity (≈1.28 m NaCl). Intermittent phase separation of Stage II mineralising fluids, initiated by pressure fluctuations in dilational sites, and/or fluid-dominated fluid: wallrock interaction, are invoked as the dominant depositional mechanisms. The granitoid-hosted Lady Bountiful lode gold deposit shares many features with other granitoid-hosted lode gold deposits in the Yilgarn Craton and the Superior Province. Granitoid-hosted lode gold deposits, such as the Lady Bountiful deposit, provide additional evidence that the dominant control on the localisation of gold mineralisation within a granitoid host is structure, with competency contrasts playing a significant role. Furthermore, the hydrothermal wallrock alteraction and orefluid chemistry characteristics of the granitoid-hosted lode gold deposits are comparable to those established for greenstone-hosted lode gold mineralisation.     

Magnetite-rich calc-silicate alteration in relation to synvolcanic intrusion at the Ansil volcanogenic massive sulfide deposit, Rouyn–Noranda, Quebec, Canada

The Ansil Cu–Au volcanogenic massive sulfide deposit is located within an Archean-age cauldron infill sequence that contains the well-known Noranda base metal mining district. The deposit is unusual in that 17% of the massive pyrrhotite–chalcopyrite orebody is replaced by semi-massive to massive magnetite. Temporally associated with the magnetite formation are several calc-silicate mineral assemblages within the massive sulfide lens and the underlying sulfide stockwork vein system. Coarse-grained andradite–hedenbergite and ferroactinolite–ilvaite alteration facies formed in the immediate footwall to the massive magnetite–sulfide lens, whereas an epidote–albite–pyrite-rich mineral assemblage overprints the margins of the chlorite-rich stockwork zone. The epidote-rich facies is in turn overprinted by a retrograde chlorite–magnetite–calcite mineral assemblage, and the andradite–hedenbergite is overprinted first by ferroactinolite–ilvaite, followed by semi-massive to massive magnetite. The footwall sulfide- and magnetite-rich alteration facies are truncated by a late phase of the Flavrian synvolcanic tonalite–trondhjemite complex. Early phases of this intrusive complex are affected to varying degrees by calc-silicate-rich mineral assemblages that are commonly confined to miarolitic cavities, pipe vesicles and veins. The vein trends parallel the orientation of synvolcanic faults that controlled volcanism and hydrothermal fluid migration in the overlying cauldron succession. The magnetite-rich calc-silicate alteration facies are compositionally similar to those of volcanic-hosted Ca–Fe-rich skarn systems typical of oceanic arc terranes. Tonalite–trondhjemite phases of the Flavrian complex intruded to within 400 m of the base of the earlier-formed Ansil deposit. The low-Al trondhjemites generated relatively oxidized, acidic, Ca–Fe-rich magmatic–hydrothermal fluids either through interaction with convecting seawater, or by assimilation of previously altered rocks. These fluids migrated upsection along synvolcanic faults that controlled the formation of the original volcanogenic massive sulfide deposit. This is one of the few documented examples of intense metasomatism of a VMS orebody by magmatic–hydrothermal fluids exsolved from a relatively primitive composite sub-seafloor intrusion. Received: 15 April 1999 / Accepted: 20 January 2000