渤海湾南部水域春秋季强壮滨箭虫 摄食压力变化的初步研究

于2010 年5 月和10 月在渤海湾南部进行了10 个站位的浮游动物生态调查,分析了强壮滨箭虫对浮游动物的摄食 压力,结果表明,春季强壮滨箭虫（Aidanosagitta crassa）的数量分布受控于温度和盐度,强壮滨箭虫的生物量为279 mg/m3, 丰度为33.8 ind/m3,摄食率为0.95mg C/m2·d,强壮滨箭虫对浮游动物总生产力和现存量的摄食压力分别为6.98 %和0.21 %, 优势种中华哲水蚤（Calanus sinicus）的数量分布与强壮滨箭虫呈现显著相关,相关系数为0.648,中华哲水蚤是强壮滨箭虫 主要的食物来源之一。秋季,强壮滨箭虫生物量和丰度分别为66 mg/m3和30.5 ind/m3,摄食率为0.50 mgC/m2·d,强壮滨箭虫 对浮游动物总生产力和现存量的摄食压力分别为3.43 %和0.72 %,强壮滨箭虫的数量与桡足类的数量呈显著相关,中小型 桡足类是强壮滨箭虫的主要食物来源。研究表明,温度和黄海海流是强壮滨箭虫摄食压力变化的主要因素。     

长江口几种优势桡足类对微型浮游动物的摄食研究

利用现场海水培养实验,结合浮游动物网样数据,研究长江口邻近海域几种优势桡足类(中华哲水蚤、背针胸刺水蚤、太平洋纺锤水蚤和精致真刺水蚤)对微型浮游动物的摄食影响。结果表明,精致真刺水蚤虽然属于肉食性种类,但几乎不摄食微型浮游动物;其余三种杂食性桡足类中华哲水蚤、背针胸刺水蚤和太平洋纺锤水蚤对微型浮游动物(纤毛虫+异养甲藻)的摄食率分别为0.66、0.09和0.59μg C/(ind·d),分别占其日总摄食量的29%、24%和37%。其中,异养甲藻在初始生物量和对桡足类饵料贡献上分别占整个微型浮游动物的30%和28%,是微型浮游动物中一个重要的组成类群。中华哲水蚤对微型浮游动物的摄食率与初始食物浓度有显著的正相关关系,并且对体长20μm纤毛虫的清滤率要明显高于对体长20μm的纤毛虫(P0.01)的清滤率,表明其偏好摄食较大个体的食物。通过Chesson选择性指数显示,尽管微型浮游动物在生物量上远小于浮游植物,但桡足类能优先选择摄食微型浮游动物;进一步结合网采浮游动物数据,获得各站三种优势桡足类丰度平均占桡足类总丰度的77%,但它们对微型浮游动物现存生物量的摄食压力仅为0.8%,表明桡足类对微型浮游动物群落的下行控制作用并不明显,仍有大部分微型浮游动物生物量未通过摄食途径进入到桡足类群落中。     

珠江口浮游桡足类摄食研究

根据珠江口2002年7月(夏季)、2003年1月(冬季)和2003年4月(春季)3个航次浮游桡足类现场调查及其肠道色素实验数据,分析了浮游桡足类食性特点、肠道色素含量及其对浮游植物和初级生产力的摄食压力。根据齿缘指数对珠江口浮游桡足类食性分析,发现捕食性桡足类种数高于草食和杂食的滤食性种数,而其丰度低于后两者。珠江口桡足类个体肠道色素平均含量为冬季高于春季和夏季,而对浮游植物现存量和表层初级生产力的摄食压力均为夏季高于春季和冬季。夏、冬季桡足类肠道色素含量与水体叶绿素a浓度呈正相关,春季不相关。     

三亚湾夏秋两季微型浮游动物摄食研究

根据2005年8月和11月的调查资料,利用现场稀释法,以叶绿素a为检测对象,分别对三亚湾海区夏秋两季微型浮游动物的摄食情况进行研究。结果表明,夏秋两季浮游植物瞬时生长率(k)分别为0.9~1.32/d和1.81~3.30/d,而微型浮游动物的摄食率(g)则为0.85~1.79/d和1.29~2.57/d。对浮游植物现存量和初级生产力的摄食压力分别是,夏季为57.26%~83.30%和78.13%~140.38%,秋季为72.47%~92.35%和86.65%~97.90%。秋季微型浮游动物以微型浮游植物为其主要食物来源,其摄食率和对初级生产力的摄食压力最高,平均分别为1.09/d和107.98%;微型浮游植物的瞬时生长率也是最高的,平均为0.94/d,为浮游植物群体的主要组成部分。在三亚湾夏秋两季可把微型浮游动物作为控制浮游植物生长的重要影响因子之一,同时与秋季相比,夏季微型浮游动物在物质循环和能量流动方面起到更显著的作用。     

南黄海浮游动物群落结构研究

根据2014年春、秋季南黄海16个站位的生物样品进行了浮游动物群落结构研究。共鉴定出99种浮游动物,其中春季68种,秋季78种。除浮游幼虫外,种类较多的类群是桡足类(34种,占总种类数的34.3%)、水螅水母(13种,13.1%)和端足类(5种,5.0%)。春季优势种为夜光虫(Y=0.259 7)、桡足幼体(Y=0.135 3)、拟长腹剑水蚤(Y=0.060 8)和伪长腹剑水蚤(Y=0.022 4),秋季时桡足幼体(Y=0.335 9)、伪长腹剑水蚤(Y=0.115 7)、强额拟哲水蚤(Y=0.053 3)、桡足类无节幼虫(Y=0.051 4)和拟长腹剑水蚤(Y=0.041 0)是优势种。春季浮游动物平均生物量为1 555.1 mg/m~3,秋季为425.8 mg/m~3。春季平均丰度为9 551.4个/m~3,秋季为2 103.7个/m~3。秋季香农-威纳指数、丰富度和均匀度结果皆比春季的高。浮游动物生物量与温度和水深相关性更高;丰度和温度相关性最高,其次和水深相关。     

小型桡足类在海洋生态系统中的功能作用

依据渤海周年的中型浮游动物网样品 ,研究了小型桡足类的优势种小拟哲水蚤(Paracalanusparvus)、强额拟哲水蚤 (Paracalanuscrassirostris)和双刺纺锤水蚤 (Acartiabifilosa)生物量的季节变动、分布和年产量 ,并与渤海大型桡足类的优势种中华哲水蚤 (Calanussinicus)进行了比较。结果表明 ,三种小型桡足类成体的年产量分别为 2 4 .89、1 0 .83和 1 9.5 4mgC/(m3·a) ,中华哲水蚤的年产量为 1 8.30mgC/(m3·a)。小型桡足类主要分布在近岸 ,特别是渤海湾和莱州湾 ,这里正好是许多经济鱼类的产卵场和育幼场 ;而中华哲水蚤主要分布在中央水域。小型桡足类的高峰季节持续时间长 ,从 4月到 1 0月 ,覆盖了几乎所有仔稚鱼大量出现的月份 ;而中华哲水蚤高峰季节持续时间短 ,仅 6月和 7月。另外 ,在粒度上 ,小型桡足类的卵、无节幼体、桡足幼体和成体都比中华哲水蚤等大型桡足类小了一个数量级 (按体积计 ) ,特别适合作为仔稚鱼的饵料。因此认为 ,在近海生态系统中 ,小型桡足类较之大型桡足类起更为重要的作用     

渤海湾秋季浮游动物群落特征及影响因素

本研究基于2017年秋季在渤海湾海域以浅水Ⅰ型浮游生物网采集的浮游动物样品,分析了浮游动物的种类组成、丰度分布和生物多样性;通过结合现场获取的环境参数,探讨了环境因子与浮游动物群落特征之间的关系。结果如下:秋季浮游动物调查共鉴定各类浮游动物22种、浮游幼虫6类,合计种类数为28。桡足类为最为优势的类群,其在浮游动物的物种丰富度中占46.4%。渤海湾秋季浮游动物的优势种类共5个,包括中华哲水蚤、小拟哲水蚤、真刺唇角水蚤、近缘大眼水蚤和强壮箭虫。秋季浮游动物平均丰度为86.9 ind./m³,平均湿重生物量为640.7 mg/m³,香农-威纳指数和物种丰富度指数分别为1.87和1.08。浮游动物丰度与环境因子间的相关性分析表明,秋季影响渤海湾海域浮游动物分布的主要环境因子组合为盐度、叶绿素和浊度。与同期历史数据相比,浮游动物的丰度和生物量均有所下降。     

南海北部秋季微型浮游动物摄食和种类组成的初步研究

2004年9月到10月间在南海北部海区对微型浮游动物的种类组成进行了调查,同期运用现场稀释法,以叶绿素a为监测对象,估计了该海区内微型浮游动物摄食率和摄食压力的水平。结果表明,南海北部海区纤毛虫群体中以多膜纲寡毛目为主,有16种,其中寡毛亚目纤毛虫4种,砂壳亚目纤毛虫11种。各站纤毛虫丰度比较低,在9~102ind/m3之间。浮游植物瞬时增长率(k)在0.03/d~2.13/d之间;微型浮游动物的摄食率(g)在0.01/d~1.06/d之间。微型浮游动物对浮游植物现存量的摄食压力(Pi)在0.089%~65.23%之间,对初级生产力的摄食压力(Pp)在33.63%~86.04%之间。微型浮游动物的摄食水平主要受其丰度的影响,同时微型浮游动物对浮游植物现存量和初级生产力的摄食压力显示,在南海北部海区微型浮游动物在初级生产力传递方面具有重要的科学意义和研究价值。     

乳山湾及邻近海域桡足类种类组成和时空分布的初步研究

分别于2011年5和10月对乳山湾及邻近海域进行2个航次的调查,共采集到桡足类28种,其中春季22种,秋季20种。主要优势种为小拟哲水蚤、克氏纺锤水蚤、双刺纺锤水蚤、拟长腹剑水蚤和强额拟哲水蚤等。春季桡足类平均丰度为13 967.19ind/m3,秋季为12 044.52ind/m3,春季航次浮游动物丰度平面分布呈现以湾口为低值中心同时向湾内和湾外递增的趋势,秋季则呈现以乳山湾西流区为高值中心向四周逐渐递减的趋势。调查海区春季多样性指数H′平均值为2.156,秋季为2.122,该指数在春季航次与盐度呈现显著的负相关,在秋季,该指数则与温度和盐度呈现显著的正相关。在两个季节中香农威纳指数与浮游植物密度的相关性均不显著。研究表明,调查海域桡足类多为适应低盐环境的生态类群,其平面分布深受水环境条件的影响,整体呈现出季节性和地域性的双重差异。     

厦门海域小型浮游动物和桡足类的摄食对浮游植物生长的影响

2005年11月16日和27日,运用稀释法和桡足类添加法,对厦门宝珠屿海域小型浮游动物及桡足类的摄食对浮游植物生长的影响进行了研究.结果表明,各粒级浮游植物的生长率均大于小型浮游动物的摄食率,小型浮游动物对总的Chla和nano-Chla具有一致的显著的摄食作用(0.51～0.78d-1),当存在螺旋环沟藻等大型的异养甲藻时,亦能摄食micro-级浮游植物.所添加的桡足类主要摄食micro-级的浮游植物,也显著摄食小型浮游动物,16日,所添加的桡足类促进nano-级浮游植物的每天生长效应达0.03ind/dm3.说明了厦门海域小型浮游动物及桡足类的摄食共同控制着浮游植物的生长,由于桡足类的杂食性,可产生一定的营养级联效应.     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

A Review of Some Environmental Issues Affecting Marine Mining

This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.     

Increased Particle Fluxes at the INDEX Site Attributable to Simulated Benthic Disturbance

Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Interannual Sea Level Variations and Annual Tides in the Northwestern Pacific

Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.     

Determination of In Situ Sediment Shear Strength from Advanced Piston Corer Pullout Forces

The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.     

Flow Cytometric Analysis of Coastal Lagoon Bacterioplankton and Picophytoplankton: Fixation and Storage Effects

The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.