Diagenesis and Their Succession of Gas-bearing and Non-gas-bearing Reservoirs in the Sulige Gas Field of Ordos Basin,China

Abstract: Comparisons have been made among lithology, diagenesis, and reservoir characteristics of gas-bearing and non-gas-bearing ones in the Sulige gas field of the Ordos Basin based on the laboratory analysis of thin sections, scanning electron microscope, and liquid inclusion of the reservoirs. The reservoirs of the Sulige gas field are now in the middle stage of diagenesis and have undergone compaction, cementation and dissolution. The secondary pore of the reservoir originated from the dissolution of the feldspar and tuff because of the organic acid action from the source rocks during the diagenetic middle stage. Gas-bearing reservoirs are common in soluble pore diagenetic facies of coarse detritus quartzose sandstone, whereas non-gas-bearing ones are common in tense compaction diagenetic facies of mud-bearing medium-fine detritus quartzose sandstone and residual intergranular pore diagenetic facies of mud-bearing medium-coarse detritus quartzose sandstone. The secondary pore is developed in gas-bearing reservoirs of the Sulige gas-field as the medium-coarse grain reservoirs formed in a powerful sedimentary environment and experienced strong dissolution. However, the sediments of fine grain size form the non-gas-bearing reservoirs because of less residual primary pore and secondary pore.     

Diagenetic Evolution and Formation Mechanisms of High-Quality Reservoirs under Multiple Diagenetic Environmental Constraints: An Example from the Paleogene Beach-Bar Sandstone Reservoirs in the Dongying Depression, Bohai Bay Basin

The diagenetic environment, diagenetic responses, diagenetic transformation model and formation mechanisms of high-quality reservoirs (beach-bar sandstones of the Paleogene fourth member) in the Dongying depression were studied through the analysis of fluid inclusions, thin section and burial evolution history. The diagenetic fluids of the beach-bar sandstone reservoirs evolved from early high salinity and weak alkalinity to low salinity and strong acidity, late high salinity and strong alkalinity and late low salinity and acidity, which were accompanied by two stages of oil and gas filling. The fluids at the margins of the sandbodies were continuously highly saline and strongly alkaline. The western (eastern) reservoirs experienced early open (closed), middle open, and late closed diagenetic environments during their burial history. The flow pattern was characterized by upwelling during the majority of the diagenesis (in the east, a non-circulating pattern transitioned into an upwelling current). Due to the evolution of the diagenetic fluids, the diagenetic sequence of the beach-bar reservoirs was as follows: early weak carbonate cementation; feldspar and carbonate cement dissolution and authigenic quartz cementation; late carbonate and anhydrite cementation, authigenic feldspar cementation, and late quartz dissolution; and late carbonate cementation, feldspar dissolution, and authigenic quartz cementation. The diagenetic strength during these stages varied or was absent altogether in different parts of the reservoirs. Due to the closeness of the diagenetic environment and the flow pattern of the diagenetic fluids, the diagenetic products are variably distributed in the sandstones interbedded with mudstones and in the fault blocks. The evolution of multiple alternating alkaline and acidic diagenetic environments controlled the distribution patterns of the reservoir diagenesis and reservoir space, and the reservoir quality index, RQI, increased gradually from the margins to the centers of the sandstones. The closeness of the diagenetic environment and the flow patterns of the diagenetic fluids controlled the differences in the reservoir properties among the fault blocks. With increasing distance from the oil-source faults, the RQI values in the west gradually decreased and in the east initially increased and then decreased.     

Origin and Distribution of Grain Dolostone Reservoirs in the Cambrian Longwangmiao Formation, Sichuan Basin, China

Dolostones in the Cambrian Longwangmiao Formation have become one of the most significant gas exploration domains in China. Over a trillion cubic meters of gas reservoirs have been discovered in the Gaoshiti-Moxi area; however, the origins and distribution of the dolostone reservoirs are not well understood. This work discussed the geology and geochemistry of the dolostone reservoirs in the Longwangmiao Formation to determine their origin and distribution. Two understandings are acquired: firstly, a carbonate ramp provided excellent conditions for grain beach deposition, while the presence of a hypersaline lake was favorable for the contemporaneous dolomitization of grain beach deposits. Petrographic and geochemical evidence further confirm that the Longwangmiao dolostone was formed during the contemporaneous stage. Secondly, the reservoir characteristics indicate that the grain beach sediments provide material basis for the development of the Longwangmiao dolostone reservoirs. Reservoir dissolution simulation experiments show that the porosity of the reservoirs was formed by dissolution during contemporaneous and burial stages. The dissolution pores formed during the contemporaneous stage were controlled by sequence interfaces. The large scale dissolution vugs formed during the burial stage subsequently spread along the pre-existing porosity and fracture zones. This study therefore identified that the development of grain dolostone reservoirs in a shallow water ramp under arid climatic conditions generally met the following conditions: (1) reefal beach deposits lay a foundation for reservoir development; (2) superficial conditions are an important determining factor for reservoir porosity; and (3) burial conditions provide environment for porosity preservation and modification.     

Characteristics and Origin of Tight Oil Accumulations in the Upper Triassic Yanchang Formation of the Ordos Basin, North-Central China

The Upper Triassic oil accumulations in the Ordos Basin is the most successful tight oil play in China,with average porosity values of less than 10% and permeability values below 1.0 mD.This study investigated the geological characteristics and origin of the tight oil accumulations in the Chang 6 member of the Upper Triassic Yanchang Formation in the Shanbei area based on over 50,000 petrological,source-rock analysis,well logging and production data.The tight oil accumulation of the Chang 6 member is distributed continuously in the basin slope and the centre of the basin.The oilwater relationships are complex.Laumontite dissolution pores are the most important storage spaces,constituting 30%-60% of total porosity and showing a strong positive relationship with oil production.The pore-throat diameter is less than 1 μm,and the calculated critical height of the oil column is much larger than the tight sand thickness,suggesting that the buoyancy was probably of limited importance for oil migration.The pressure difference between the source rocks and sandstone reservoirs is inferred to have provided driving force for hydrocarbon migration.Two factors of source-reservoir configuration and laumontite dissolution contributed to the formation of the Chang 6 tight oil accumulations.Intense hydrocarbon generation and continuous sand bodies close to the hydrocarbon kitchen are the foundation for the large-scale oil distribution.Dissolution of feldspar-laumontite during the process of organic matter evolution generated abundant secondary pores and improved the reservoir quality.     

Depositional and Diagenetic Controls on Sandstone Reservoirs with Low Porosity and Low Permeability in the Eastern Sulige Gas Field,China

In order to determine the genesis and the factors that control the low-porosity and low- permeability sandstone reservoirs in the eastern Sulige Gas Field in the Ordos Basin, systematic studies on the sedimentary facies and diagenesis were conducted by means of analysis of cores, thin sections, fluid inclusions, X-ray diffraction, cathode luminescence and scanning electron microscope. It was found that the sand bodies of the major gas reservoirs in the Shan1 section （P1S1） and the He8 section （P2H8） were formed during the Permian as sedimentary facies such as braided-channel bars, braided-river channels and point bars of a meandering river. Four types of diagenetic facies developed subsequently： in order from the best to the poorest properties these are type A （weak compaction, early calcite cement-chlorite film facies）, type B （moderate compaction, quartz overgrowth-feldspar corrosion-kaolinite filling facies）, type C （strong compaction, late calcite cement-quartz corrosion facies） and type D （matrix filling and strong compaction facies）. This diagenesis is undoubtedly the main reason for the poor reservoir properties of sandstone reservoirs, but the sedimentary facies are the underlying factors that greatly affect the diagenesis and thus the reservoir performance. Favorable diagenetic facies developed mainly in relatively small lithofacies such as braided-river channels, channel bars and point bars. The vertical distribution of the physical properties and the diagenetic facies of the reservoirs are related to the stratigraphic succession. Most of the sandstones between mudstones and thin beds of sandstone are unfavorable diagenetic facies. Analyses indicate that siliceous cementation can hardly be stopped by hydrocarbon filling. Authigenic chlorite could hardly protect the primary porosity. It not only occupies pore space, but also blocks pathways through sandstone reservoirs, so that it has significant influence on the permeability. Authigenic chlorite cannot be used as a marker for a     

Quartz Cement in Middle Jurassic Reservoir Sandstones in North Sea. A Review. Part Ⅰ: Occurrence and Character

Quartz cementation is a very important diagenetic event and main porosity-occluding factor in the reservoir sandstones in middle Jurassic i n North Sea. Petrological studies indicate the quartz cementation is limited in shallower burial depth and increases significantly at depth around 3.5 - 4 km. T he amount of quartz cement increases with burial depth from an average of approx imately 4%-5 vol% at 2.5 km to 17%-20 vol% at 4 km. Highest abundances of quartz cement exceeds 28% which has been found in the Ness Formation. Variations in qu artz cementation between different sandstone facies is minimal for any one forma tion, with exception of the generally lower quantities present in the heterolith ic sandstone. Homogenisation temperatures of fluid inclusion in quartz overgrowt h from the North Sea reservoirs indicate that few quartz cement occur below the temperature 70 ℃～80 ℃, the onset of large volume quartz cement starts at the temperatures higher than 90 ℃ which suggests the quartz cementation is temperat ure - dependent during progressing diagenesis of sandstones.     

Characteristics and Genesis of the Es_1 Productive Sandstone Reservoir(Paleogene), Nanpu Sag,East China

The Shahejie Formation is a fundamental rock unit for hydrocarbon exploration and production in the Nanpu Sag, Bohai Bay Basin. Methodology including thin sectioning, core observations, fluorescence, scanning electron microscopy, cathodoluminescence, fluid inclusion, laser scanning confocal microscopy and geochemical analysis(C, O isotopes) were all utilized to investigate the reservoir characteristics and origin of the Es_1 Sandstone. Thin section study showed that the reservoir rock consisted of feldspathic litharenite and lithic arkose. The reservoir pores are categorized as intergranular pores, fracture pores, dissolution pores and intergranular cement dissolution pores. The studied sandstone had good porosity(0.05%–35%) and permeability(0.006–7000 m D). The Es_1 reservoir is classified as a fractured reservoir, a primary intergranular pore-associated reservoir and a dissolution reservoir. Deposition, diagenesis and tectogenesis are the main factors that played important roles in the development of the reservoir. Sedimentation is the foundation and assumption for reservoir development, but the effective reservoir is primarily controlled by primary pores, fractures, lithofacies, tectonic elements and dissolution pores. Moreover, compaction, fracture filling and cementation were the primary sources of reservoir densification. The reservoir was progressively formed through the influence of different geological and diagenetic events. The present study provides significant information and references for hydrocarbon exploration and development in the Nanpu Sag.     

Sealing Features of Fluid-Rock System and its Control on Acidic Dissolution in Cretaceous Sandstone Reservoirs, Kuqa Subbasin

The Cretaceous Bashijiqike Formation is the main gas-bearing strata in the northern structural deformation zone of Kuqa subbasin. The acidic dissolution of this formation arose at 5–4Ma, which corresponds to the late burial stage of the Bashijiqike Formation. Variability of interlayer due to rock composition is negligible. Differentiation of acidic dissolution in sandstones was controlled by difference in amount of exogenous acid fluid from underlying strata. For the absence of sedimentary and structural carrier system between the isolated sandstone reservoirs, most fluid-rock systems show relative sealing feature during later burial stage by sealing feature of formation pressure, geochemical characteristics of formation water and content of diagenetic products in sandstones. Variation of sealing effects for different fluid-rock systems is obvious. The pressure coefficient is inversely proportional to acidic dissolved porosity of sandstone reservoirs, indicating that the variation of sealing effects for fluidrock system mainly controls the differentiation of acidic dissolution.     

Mechanism of Secondary Pore Formation and Prediction of Favorable Reservoir of Paleogene in Jiyang Sag,Eastern China

Jiyang (济阳) sag is an oil rich basin,consisting of Huimin (惠民),Dongying (东营),Zhanhua (沾化),and Chezhen (车镇) depressions.The elastic rock of Paleogene has undergone early and middle diagenetic stages and now the main clastic reservoir is in the middle diagenetic stage.Primary and secondary pores are developed in Paleogene sandstone,the latter is generated from the dissolution of feldspar and calcite cement in rocks owing to the organic acid from the maturated source rock,but the materials dissolved are different in different depressions.The reservoir secondary pores of Dongying depression are generated from the dissolution of calcite cement,the ones of Zhanhua and Huimin depressions from the dissolution of feldspar,the secondary pores of Chezhen depression from the dissolution of feldspar in upper section,and the dissolution of calcite cement in the lower section of Paleogene,respectively.The secondary pores are developed in two depths and the depth goes down from west to east,from south to north in Jiyang sag.The major controlling factors for secondary pore development are maturity and location of source rock.Lastly,the favorable reservoirs are evaluated according to reservoir buried depth,sedimentation,and diagenesis.The reservoir with high quality is located in the northern and central parts in Dongying depression; there are some good reservoirs in Gndao (孤岛),Gudong (孤东),and Gunan (孤南) areas in Zhanhua depression,and the favorable reservoirs are located in the north steep slope and the south gentle slope of Chezhen depression and central uplift,south gentle slope of Huimin depression.     

Main Controlling Factors and Dominant Reservoir Series Analysis of Es3 in the Qibei Area of Qikou Sag

Based on analysis of geophysical data such as core observation, rock slices identification, physical property, scanning electron microscope, X-ray diffraction, logging data etc., 16 factors of sedimentation, diagenesis, fluid pressure, and their relationships with reservoir physical property were analyzed, and the results indicate sedimentation is the internal factor controlling the reservoir property, diagenesis is the external and final decisive factor and abnormal fluid pressure is an important factor preserving the deep reservoir property. Quantitative characterization of diagenesis indicates that compaction and dissolution are more important than cementation and they respectively cause porosity change of ?23.6% and 7.7% and ?6.2%. Through optimizing 11 main controlling factors and constructing reservoir evaluation index (REI) according to the hierarchical cluster and principal component analysis, reservoir classification standard was established and reservoirs were divided into four classes. The studies show that Es32SQ4 consists mainly of class I and II, while Es32SQ6 is mainly of class III and II; the favorable zone is the north and south slope of Qibei sub-sag and the Liujianfang fault-nose. The successful application of the quantitative and comprehensive evaluation in the Qibei area verifies the advanced, practicable method of less artificial factor is suitable for the low porosity and permeability reservoir.     

旬邑地区三叠系延长组长8_1储层成岩作用与孔隙演化

通过铸体薄片、扫描电镜、高压压汞、X射线衍射等方法对旬邑地区延长组长81储层成岩作用进行研究,在此基础上分析储层孔隙演化过程,讨论成岩作用差异对储层孔隙演化的影响。结果表明:长81砂岩储层由岩屑长石砂岩和长石岩屑砂岩组成,主要受压实作用、胶结作用及溶蚀作用的影响。长81储层原始未胶结砂岩孔隙度为36.01%,压实作用造成孔隙度损失为20.37%,早期胶结引起孔隙度降低8.51%,溶蚀作用使孔隙度增加3.25%,晚期胶结导致孔隙度下降5.54%。砂岩岩性差别对储层孔隙演化影响较小,成岩作用的差异是影响储层孔隙演化的主要因素,直接制约孔隙演化过程和储层质量。     

特低渗透—致密砂岩成岩作用特征及其差异性分析——以鄂尔多斯盆地陇东地区延长组为例

根据大量岩石薄片观察、扫描电镜和X?衍射分析,研究陇东地区典型区块三叠系延长组长6—长8段特低渗透—致密砂岩的岩石学特征、孔隙成因等,探讨成岩作用类型及主要控制因素,剖析延长组长6与长8成岩作用的差异性。研究表明:该区砂岩经历的成岩作用主要有压实作用、胶结作用、溶解作用等,建立了三角洲和重力流成岩演化模式序列,研究区目前处于中成岩A?B期;并从储层形成的物源、沉积环境、古气候等方面的差异性,探讨了华庆区块长63和马岭区块长81成岩作用差异性的成因。由于长6较长8粒度细、杂基含量较高,其压实作用强,原生粒间孔保存较少,早期绿泥石膜胶结不发育,含铁碳酸盐胶结物及自生伊利石含量高,砂岩储层物性较差。     

苏里格西部致密砂岩气藏储层成岩作用特征及孔隙度定量演化

为了探究鄂尔多斯盆地苏里格西部地区储层致密成因及孔隙演化规律,本文基于铸体薄片、电镜分析和高压压汞等室内测试,通过建立理论计算模型,对其苏48区储层的孔隙演化进行定性分析与量化表征。分析结果表明,区内盒8段储层岩性主要为石英砂岩和岩屑石英砂岩,储层成岩阶段处于早成岩和中成岩阶段,部分达到晚成岩期,成岩作用顺序依次为:压实-硅质胶结-绿泥石胶结-黏土矿物胶结-溶蚀溶解-碳酸盐胶结;量化结果显示:压实作用和胶结作用是造成储层孔隙度下降的主要因素,其中压实作用使得原始孔隙度下降22%,胶结作用使其下降9.81%,溶蚀作用对储集空间有所改善,增加了3.88%的孔隙,最终形成了当今平均孔隙度为7.47%的致密砂岩储层。据理论计算与实测物性数据进行对比,计算结果与实测结果基本吻合,相对误差小于3%。根据成岩作用的作用强度,结合岩石特征分析,可将研究区盒8段储层成岩相划分出4种,即弱-中胶结强溶蚀相、中胶结中溶蚀相、中溶蚀强胶结相和强压实致密相。综合试气成果可知,弱-中胶结强溶蚀相区域气产量较为可观,可将弱-中胶结强溶蚀相区域作为天然气持续上产的主要研究区域。     

鄂尔多斯盆地上三叠统延长组长6油层组储集层成岩作用及其影响因素

鄂尔多斯盆地延长组长6油层组储集层是受沉积作用和成岩作用共同控制的典型低孔低渗储集层.长6油层组储集层主要为长石砂岩、岩屑长石砂岩和长石岩屑砂岩.盆地北部砂体具有长石含量高和石英含量低的特点,西南地区具有长石含量低、石英含量高和杂基含量高的特点.储集空间以剩余粒间孔和次生溶蚀孔为主.主要成岩作用类型有压实作用、胶结作用...     

四川广安地区须家河组四段储层成岩作用与孔隙演化

四川广安地区上三叠统须家河组四段砂岩储层是四川盆地内主要的天然气储层之一, 其储集岩主要为细-中粒岩屑砂岩、岩屑长石砂岩及石英砂岩, 该砂岩储层具有低孔隙度、低渗透率的特点。在对该区上三叠统须家河组气藏宏观沉积特征研究的基础上, 采用岩石薄片、铸体薄片、扫描电镜及X射线衍射等方法, 对该气藏储层的成岩作用、孔隙演化及其对储集物性的影响进行了探讨, 认为研究区砂岩经历了压实压溶作用、胶结作用、交代作用、溶解作用以及破裂等多重成岩作用, 已达到了中成岩阶段B亚期。成岩作用是控制该区储层物性的一个关键因素, 在孔隙演化过程中, 压实压溶、胶结作用主要起破坏性作用; 而溶蚀作用、环边绿泥石胶结主要起建设性作用。     

沉积和成岩作用对湖相重力流致密砂岩储层质量的影响——以鄂尔多斯盆地合水地区长7段为例

为揭示深水重力流沉积致密砂岩储层发育特征及分布规律,笔者等以鄂尔多斯盆地合水地区三叠系延长组7段（简称长7段）为例,通过岩芯描述、铸体薄片以及扫描电镜观察,结合物性数据以及分析化验资料对研究区长7段沉积、储层岩石学、孔隙类型以及成岩作用特征进行了分析,在沉积和成岩作用特征研究基础上探讨了优质储层的形成机理,据此建立了湖相深水重力流致密砂岩储层质量的演化模式。结果表明：合水地区长7段储层岩性以长石岩屑砂岩为主,孔隙类型主要为溶蚀孔和残余粒间孔,属于特低孔—超低渗储层,主要成岩作用为压实、胶结和溶蚀作用。重力流致密砂岩储层质量受沉积相和成岩作用共同影响,限制性水道中沉积的砂体由于具有强的抗压实能力、少的伊利石和碳酸盐矿物含量以及较多长石、岩屑溶蚀孔隙,储层质量最好。不同沉积环境中的砂岩在颗粒粒度、分选、沉积厚度方面存在差异,通过影响成岩作用类型与强度综合控制储层质量。研究成果可为相同类型储层的预测和评价提供参考。     

Coupling relationship between reservoir diagenesis and hydrocarbon accumulation in Lower Cretaceous Yingcheng Formation of Dongling,Changling fault depression,Songliao Basin,Northeast China

The Lower Cretaceous Yingcheng Formation in the southern Songliao Basin is the typical tight oil sandstone in China. In order to better predict the petrophysical properties of the tight sandstone reservoirs in the Lower Cretaceous Yingcheng Formation, Songliao Basin, Northeast China, the diagenesis and porosity evolution was investigated using a suite of petrographic and geochemical techniques including thin section analysis, scanning electron microscopy, mercury intrusion and fluid inclusion analysis, on a set of selected tight sandstone samples. Combined with the histories of burial evolution, organic matter thermal evolution and hydrocarbon charge, the matching relationship between reservoir porosity evolution and hydrocarbon accumulation history is analyzed. The result showed that the tight sandstone reservoirs characterized of being controlled by deposition, predominated by compaction, improved by dissolution and enhanced by cementation. The hydrocarbon accumulation period was investigated using a suite of hydrocarbon generation and expulsion history, microfluorescence determination and temperature measurement technology. According to the homogenization temperature of the inclusions and the history of burial evolution, Yingcheng Formation has mainly two phases hydrocarbon accumulation. The first phase of oil and gas is charged before the reservoir is tightened, the oil and gas generated by Shahezi source rocks enter the sand body of Yingcheng Formation, influenced by the carrying capability of sand conducting layer, oil and gas is mainly conducted by the better properties and higher connectivity sand body and enriched in the east, which belongs to the type of densification after hydrocarbon accumulation. The second phase of oil and gas charge after densification, which belongs to the type of densification before the hydrocarbon accumulation.     

致密砂岩储层致密化与成藏史耦合关系研究--以鄂尔多斯南部镇原-泾川地区延长组长8油层组为例

鄂尔多斯盆地南部镇原-泾川地区（简称镇泾地区）上三叠统延长组长8油层组是典型的致密砂岩储层。通过铸体薄片分析、阴极发光薄片分析、荧光薄片分析、扫描电镜分析、X射线衍射分析、流体包裹体测试等多种分析测试方法对长8油层组储层开展了储层特征、成岩作用、油气充注时间与期次等研究,对孔隙度演化进行定量化分析,并基于成岩-成藏耦合关系的研究恢复了储层孔隙度的演化过程。研究表明,镇泾地区延长组长8油层组储层为长石岩屑砂岩、岩屑长石砂岩,成分成熟度与结构成熟度均较低,粒间充填钙质胶结物、硅质胶结物、自生黏土矿物等;储集空间以粒间溶孔、剩余原生粒间孔为主;储层处于中成岩阶段B期,发育了较强的压实作用、胶结作用,溶解作用相对较弱;储层致密化的主因为压实作用和胶结作用,分别造成减孔22.2%和14.6%,溶解作用增孔5.1%,交代作用增孔约0.6%。成藏早-中期储层未致密化,成藏晚期储层进入致密化阶段,总体储层致密化史-成藏史耦合关系为“先成藏,后致密”过程。     

鄂尔多斯盆地彭滩-杨井地区长2储层的成岩作用

彭滩-杨井地区长2主力层砂岩岩石学、成岩作用、孔隙类型研究表明：该区长2储层岩石类型以长石砂岩和岩屑长石砂岩为主,成分和结构成熟度均较低,主要经历的成岩作用有压实作用、胶结作用、交代作用和溶解作用。根据砂岩成岩作用特征,结合其埋藏深度、岩石古地温、有机质成熟度等分析资料及岩石结构、孔隙类型特征,长2主力层主要处于晚成岩A期成岩阶段。     

鄂尔多斯盆地姬塬西部三叠系延长组长8油层组成岩作用与致密化过程*

利用岩心、铸体薄片、扫描电镜、碳氧同位素及流体包裹体等资料,对鄂尔多斯盆地姬塬西部三叠系延长组长8油层组致密储集层特征进行了研究,重点分析了储集层成岩作用特征和储集层致密化成因机制及过程。研究区长8油层组砂岩主要为岩屑长石砂岩和长石岩屑砂岩,经历了压实—压溶、胶结、交代、溶蚀及构造破裂等成岩作用,整体处于中成岩A期晚期。典型成岩序列依次为机械压实、绿泥石黏土膜、早期(泥晶)方解石胶结、石英次生加大、长石、岩屑溶蚀、自生高岭石胶结、自生石英胶结、中期(含)铁方解石胶结。综合研究认为:(1)近物源伴随湖平面快速上升的沉积环境提供了储集层致密化的物质基础,不同沉积微相储集层物性差别较大,分流河道最好,分流间湾最差;(2)长8油层组原始孔隙度为41.35%,压实作用损孔率为50.67%,造成储集层孔隙度急剧降低,胶结作用损孔率为37.48%,导致孔隙度进一步减小,溶蚀作用仅增加了3.26%的孔隙度,难以有效改善储集层质量;(3)上述沉积与成岩因素共同导致储集层致密,致密化过程可分为压实孔隙骤减阶段、早期胶结减孔阶段、溶蚀作用增孔阶段和晚期胶结致密阶段共4个阶段;(4)油气大量充注期储集层孔隙度远低于10%,长8油层组先致密后成藏。