大地电磁法三维快速松弛反演

实现大地电磁法快速三维反演的关键在于找到快速计算灵敏度矩阵的方案. 本文在对大地电磁三维张量阻抗表达式进行深入分析的基础上，获得了三维快速松弛反演算法的灵敏度函数表达式，解决了三维快速松弛反演的核心问题；为了减小反演解的多解性，针对三维问题定义了最小构造函数，实现了求最小构造的三维快速松弛反演算法. 对二维棱柱体、三维棱柱体理论模型的大地电磁合成数据进行了反演试算，反演结果与理论模型相吻合. 对日本Kayabe地区实测资料进行了XY模式反演，反演得到的地电模型较好地反映了地热资源的分布. 反演试算结果表明大地电磁三维快速松弛反演具有计算速度快、结果稳定可靠等特点；使三维快速松弛反演在普通微机上得以实现.     

一种并行的大地电磁场非线性共轭梯度三维反演方法

本文改进并验证了大地电磁测深数据的三维反演算法和并行计算程序,程序对计算机物理内存和CPU速度及数量要求较低,使普通家用机进行三维反演计算成为可能.本文在Newman和Alumbaugh(2000)提出的三维非线性共轭梯度算法和Rodi和Mackie(2001)给出的大地电磁场二维NLCG反演预处理方法的基础上实现了大地电磁场NLCG三维反演算法,改进了的预处理方法,将反演计算对初始模型的依赖性降到最低,并且通过理论模型验证了程序的正确性,并根据日本KAYABE地区实测数据的反演结果验证了算法的实用性.     

复杂条件下大地电磁资料二维反演及初始模型构建研究

大地电磁资料反演方法较多,但构建二维反演初始模型常规方法主要有两种:以均匀半空间为初始模型、直接以一维反演结果为初始模型.本文利用典型实测剖面资料对这两种方法进行反复试验对比,结果表明:在地形及构造复杂地区,由于实测资料存在严重的静态效应,利用常规方法构建反演初始模型进行二维反演,难以达到理想的反演效果.基于此,本文提出了一种构建二维反演初始模型与反演新的思路方法,其核心为用于反演与构建初始模型数据为同一基础数据,但对基础数据分别进行处理,得到两个处理及校正程度不同的数据,分别用于初始模型构建与二维反演输入数据,这样得到的反演结果既能较好地保留浅部至深部有用异常信息,又能够最大程度上消除实测资料中的静态效应.本文进一步对实测剖面反演结果与已知地质信息进行对比,验证了本方法的有效性和可靠性,认为此方法为地形及地质条件复杂地区大地电磁资料处理反演提供了新的思路,具有一定的参考意义和借鉴作用.     

稀疏测线大地电磁资料三维反演研究:合成算例(英文)

受勘探成本和工区环境等因素的影响,当前大多数大地电磁实际工作采取布置稀疏测线采集数据和使用二维反演方法解释这些稀疏测线数据的方式。然而,二维反演方法在解释三维地电构造数据时存在局限性,有时甚至做出错误的地质解释。本文尝试了使用三维反演方法对大地电磁稀疏测线数据进行反演解释。使用大地电磁全信息资料三维共轭梯度反演程序对理论模型合成稀疏测线数据进行了三维反演。结果表明:这种反演方案是可行与有效的。同时,我们发现在不同数据的三维反演结果中,四个张量阻抗元素和两个倾子数据同时反演的结果相对更为准确,更接近理论模型。     

大地电磁测深二维反演对“准二维”地质构造的适应性研究

受计算机硬件水平限制,大地电磁(MT)三维反演难以在实际中推广应用,MT数据解释仍以二维反演为主.地质构造具有一定的二维性特征,但不同的地质构造走向往往不同、MT测线无法与每个构造的走向垂直,这使得实际MT数据并不满足严格的二维反演条件.因此,有必要开展大地电磁测深二维反演对"准二维"地质构造的适应性研究.本文设计三个理论地电模型,通过三维正演计算获得各测点大地电磁响应,以此模拟实际观测数据.对MT数据进行相位张量分析,结果表明设计的地电模型主要表现为二维性特征.利用非线性共轭梯度(NLCG)反演算法对理论MT数据进行二维反演研究,重点讨论了测线方向、电性主轴旋转策略及反演模式选择,对反演结果的影响.对比分析反演结果,得到如下认识:1.测线方向对反演结果影响较小;2.电性主轴旋转角度对反演结果影响较大;3.TE+TM联合模式及单独TM模式的反演效果较好.研究结果表明:当一条测线下方在横向与纵向上存在走向不同的多个异常体时,对整条剖面分测点、分频段进行电性主轴旋转,反演所得结果最可靠.     

基于有限差分正演的带地形三维大地电磁反演方法

本研究实现了一套基于有限差分（FD）方法的大地电磁测深数据带地形三维反演算法及代码.其中,在大地电磁场正演数值模拟方面,开发了起伏地形条件下基于交错网格剖分、有限差分方法的大地电磁测深三维正演代码;在满足平面波场假设的前提下,使用长方体网格剖分模拟三维起伏地形,实现了带地形三维正演计算;并设计理论模型进行试算,经试算结果与前人的有限元法计算结果对比,验证了所研发的带地形三维正演计算的正确性与可靠性.在反演方面,本研究基于非线性共轭梯度方法编写了大地电磁测深带地形三维反演代码,试验了不同的共轭梯度搜索因子β,避免了目标函数对海森矩阵（参数二次导数矩阵）的显式计算和存储,初步实现了大地电磁资料的带地形三维反演.最后,对一系列理论模型进行正演计算,利用其生成的合成数据模拟实测数据进行反演,并与现有的不带地形大地电磁测深三维反演结果比较,检验了所研发的带地形三维反演计算的可靠性与稳定性.     

大地电磁资料精细处理和二维反演解释技术研究(三)——构建二维反演初始模型的印模法

在主流的线性最优化大地电磁二维反演中,如何合理构建初始模型是一个亟待解决的问题.常用的是采用均匀半空间或一维反演结果构建初始模型,不易获得稳定可靠的反演效果.实践表明,尽管基于不同初始模型的大地电磁二维反演结果差别较大,但均较初始模型更为接近真实模型.基于这样一种认识,经过反复的理论和实践探索,我们提出构建大地电磁二维反演初始模型的印模法.印模法的基本思想是依据已有反演结果和均匀半空间模型之间的加权来确定下一步二维反演的初始模型,它一方面保留了已有反演结果中关于真实模型的宏观轮廓信息,另一方面,保证了深部电性结构的均匀性,从而满足大地电磁二维正演所要求的底边界条件.基于印模法,本文进一步提出了迭代重构的反演思想.通过多个理论模型和实测数据的反演计算,验证了上述方法可在很大程度上压制初始模型对反演结果的影响.     

基于三维模拟的海洋CSEM资料处理

海洋可控源电磁法已经成为海洋油气勘探一个重要工具,但是其资料处理和解释还处于定性和一维模拟阶段.在积分方程三维模拟的基础上对Troll油田实测数据进行了处理,采用人机交互三维模拟寻找背景模型和异常体初始模型,最后对异常体电阻率采用准线性近似快速反演,取得了定量的结果.同时,说明对于二维测线和二维模型依然可以用三维来模拟,其结果优于二维反演.在电子计算机技术快速发展的今天,可以预计三维反演将成为资料处理解释的主流.     

大地电磁三维畸变特征及校正新技术的应用研究

大地电磁研究和应用中,面临的实际地质结构多数是三维的,但是当前三维反演技术还不成熟,仍需要利用二维模型进行近似反演解释。在进行二维反演解释时,如何分析认识三维局部畸变的性质,最大限度地克服三维局部畸变的影响,获得尽可能可信的地质解释结果,如何认识三维模型的二维近似程度,     

基于二次场方法的并行三维大地电磁正反演研究

快速且高精度的三维大地电磁法正反演是目前研究的热点.由于大地电磁法场源的平面波特性,以往的正演方法大多采用直接求解总场的方法,在边界强加二维边界条件.本文提出了一种基于二次场方法的三维大地电磁法正演算法,将平面波在层状背景模型中的响应作为场源项,得到二次场满足的偏微分方程,并利用交错网格有限差分法求取二次场.与其他学者的基于总场方法的结果的对比证明了本文采用方法的正确性.在基于二次场的正演算法基础上,实现了基于L-BFGS的三维反演方法,并对公开的数据集进行了反演.另外,针对大地电磁法的多频率观测特性,采用了基于MPI的分频并行策略对程序进行并行化,可达到接近线性的加速比.     

APPLYING 3D INVERSION OF SINGLE-PROFILE MAGNETOTELLURIC DATA TO IDENTIFY THE SHADE AND YUNONGXI FAULTS

Many synthetic model studies suggested that the best way to obtain good 3D interpretation results is to distribute the MT sites at a 2D grid array with regular site spacing over the target area. However, MT 3D inversion was very difficult about 10 years ago. A lot of MT data were collected along one profile and then interpreted with 2D inversion. How to apply the state-of-the-art 3D inversion technique to interpret the accumulated mass MT profiles data is an important topic. Some studies on 3D inversion of measured MT profile data suggested that 2D inversions usually had higher resolution for the subsurface than 3D inversions. Meanwhile, they often made their interpretation based on 2D inversion results, and 3D inversion results were only used to evaluate whether the overall resistivity structures were correct. Some researchers thought that 3D inversions could not resolute the local structure well, while 2D inversion results could agree with the surface geologic features much well and interpret the geologic structures easily. But in the present paper, we find that the result of 3D inversion is better than that of 2D inversion in identifying the location of the two local faults, the Shade Fault(SDF)and the Yunongxi Fault(YNXF), and the deep structures. In this paper, we first studied the electrical structure of SDF and YNXF based on a measured magnetotelluric(MT) profile data. Besides, from the point of identifying active faults, we compared the capacity of identifying deep existing faults between 2D inversion models and 3D models with different inversion parameters. The results show that both 2D and 3D inversion of the single-profile data could obtain reasonable and reliable electrical structures on a regional scale. Combining 2D and 3D models, and according to our present data, we find that both SDF and YNXF probably have cut completely the high resistivity layer in the upper crust and extended to the high conductivity layer in the middle crust. In terms of the deep geometry of the faults, at the profile's location, the SDF dips nearly vertically or dips southeast with high dip angle, and the YNXF dips southeast at depth. In addition, according to the results from our measured MT profile, we find that the 3D inversion of single-profile MT data has the capacity of identifying the location and deep geometry of local faults under present computing ability. Finally, this research suggests that appropriate cell size and reasonable smoothing parameters are important factors for the 3D inversion of single-profile MT data, more specifically, too coarse meshes or too large smoothing parameters on horizontal direction of 3D inversion may result in low resolution of 3D inversions that cannot identify the structure of faults. While, for vertical mesh size and data error thresholds, they have limited effect on identifying shallow tectonics as long as their changes are within a reasonable range. 3D inversion results also indicate that, to some extent, adding tippers to the 3D inversion of a MT profile can improve the model's constraint on the deep geometry of the outcropped faults.     

大地电磁三维快速松弛反演并行算法研究(英文)

为了进一步提高大地电磁三维快速松弛反演的计算效率,在深入分析大地电磁三维快速松弛反演算法的基础上,结合MPI自身的优越性,确定了并行计算的思路,实现了三维快速松弛反演的并行计算。通过理论模型合成数据和实测数据对实现的三维快速松弛反演并行程序进行了试算,分析对比了在多种情况下程序的执行效率。测试结果表明,所实现的三维快速松弛反演并行程序运行结果正确,效率提高明显。此成果在普通微机上实现,推动了大地电磁三维反演技术的实用化,可为其它地球物理三维正反演研究所借鉴。     

大地电磁全信息资料三维共轭梯度反演研究(英文)

在对张量阻抗数据、倾子数据和共轭梯度算法深入分析的基础上,我们实现了大地电磁全信息资料三维共轭梯度反演算法。基于全信息资料的三维共轭梯度反演研究,探讨了同时利用五个电磁场分量整理得到的大地电磁资料进行三维反演定量解释的方法以及全信息数据在三维反演中的作用。理论模型合成数据的反演结果表明,在三维反演中使用张量阻抗和倾子数据结合的全信息数据的反演结果优于只使用张量阻抗数据(或只使用倾子数据)的反演结果,提高了反演结果的分辨率和可信度。合成数据的反演算例也验证了所实现的大地电磁全信息资料三维共轭梯度反演算法的正确性和稳定性。     

Three-dimensional interpretation considering the static and the sea-effects of magnetotelluric data obtained in Jeju,Korea

Three-dimensional (3D) magnetotelluric (MT) surveys have been performed in Jeju, the largest volcanic island in Korea to figure out any possible structures or potential anomaly for remnant deep geothermal resources. Various approaches have been applied to interpret MT data observed in Jeju. MT dataset shows generally simple stratigraphy of four layers, though contains the severe static and the sea-effects. In our previous works, the induction vectors and 3D inversion results have commonly indicated the existence of a conductive anomaly in central parts of the island, beneath Mt. Halla. The 3D inversion dealt the static shifts as inversion parameters. The Jeju MT dataset, however, still contains the effect of conductive sea water surrounding the island.The sea-effect on MT impedance can be represented as a distortion tensor and excluded from the Jeju MT dataset by an iterative sea-effect correction. In this study, 3D inversion incorporating static shift parameterization was conducted using MT dataset corrected using 1D resistivity model obtained from the iterative scheme. Reasonably reconstructed images are obtained through the 3D inversion and using the MT dataset with sea-effect correction. The inversion result still shows the conductive anomaly in a similar depth. RMS misfits converged to a lower value than that of inversion using MT data before the sea-effect correction. From the fact, it is highly possible that the conductive anomaly is not an artifact but a real underground structure. Further investigation about the anomaly including exploration drilling is needed to see if it is from a fracture containing conductive sea water or related to the old volcanic activities.     

3-D inversion of MT data from the Sabalan geothermal field,Ardabil, Iran

Since the true Earth is 3-D in nature, a three-dimensional (3-D) inversion has clear advantages over lower dimensional inversions. We utilized a 3-D magnetotelluric (MT) inversion code, WSINV3DMT, to obtain a realistic resistivity model using a long period MT data set collected in the Northwest Sabalan geothermal field in Ardabil, Iran. The apparent resistivity and phase curves, the magnetic induction vectors, the impedance polar diagrams and the rotational invariant of impedance tensor, indicate a complex 3-D conductivity structure. After setting up the model parameters and designing the appropriate block discretization, we performed the 3-D inversions for two sets of observed data; one set includes the full MT impedance tensor and another set contains only off-diagonal elements of the MT impedance. The final model was selected according to the relative magnitude of the data misfit and the model norm with respect to various Lagrangian multipliers. The results of this study illustrate the 3-D inversion of the off-diagonal elements of MT impedance tensor is precisely enough to explain the structures related to the geothermal source. The obtained results were compared with the results of available 2-D models and they are then interpreted using all of the geological and drilling data of the area. The main outcome of this study is the precise delineation of the geometry of geothermal source that is located at the center of the study area with a surface coverage of about 7 km².     

起伏地形下大地电磁L-BFGS三维反演方法

为推进大地电磁三维反演的实用化,本文实现了基于L-BFGS算法的带地形大地电磁三维反演.首先推导了大地电磁法三维反演的Tikhonov正则化目标函数以及Hessian矩阵逆矩阵近似表达式和计算方法,然后设计了一种既能保证空气电阻率固定不变又能保证模型平滑约束的协方差矩阵统一表达式,解决带地形反演问题.在反演算法中采用正则化因子冷却法以及基于Wolf条件的步长搜索策略,提升了反演的稳定性.利用开发的算法对多个带地形地电模型（山峰地形下的单个异常模型、峰-谷地形下的棋盘模型）的合成数据进行了三维反演,并与已有大地电磁三维反演程序（ModEM）进行对比,验证了本文开发的三维反演算法的正确性和可靠性.最后,利用该算法反演了华南某山区大地电磁实测数据,得到该区三维电性结构,揭示了研究区以高阻介质为基底,中间以低阻不整合面和相对低阻介质连续分布,浅部覆盖高阻介质的电性结构特征,进一步验证了本文算法的实用性.     

大地电磁三维交错网格有限差分数值模拟的并行计算研究

为了更有效的提高大地电磁三维正演的计算速度,引入了并行处理技术.大地电磁三维交错网格有限差分数值模拟是按照不同频率来计算的,各频率之间求取电磁场值的过程是相互独立的.根据这一特点,可以将多个频率的计算任务平均划分为一个或者几个频率的计算子任务,分配到各个计算节点去并行执行,计算完成后将结果汇总.本文通过采用主从并行模式、分频并行计算的方案,在曙光TC5000A高性能并行平台上实现了基于MPI的大地电磁三维正演的并行计算.通过两个理论模型对实现的大地电磁三维正演并行算法进行试算,对比分析了多个节点机下程序的执行效率.测试结果表明,所实现的三维正演并行算法是正确的、高效的,为进一步的大地电磁三维反演并行算法研究奠定了重要基础.     

三维/三维构造下大地电磁相位张量数值模拟

当地表存在三维非均匀电导率分布时,区域大地电磁响应发生畸变. 以往对这种畸变研究多假设近地表为三维,区域构造为一维或二维. 对于更一般的三维/三维构造,为了分析并消除这种畸变影响,真实反映地下三维区域构造信息,本文实现了三维大地电磁相位张量积分方程数值算法,并研究在不同地质模型下相位张量响应. 结果表明,相位张量不仅可以反映一般三维构造信息,亦可有效反映复杂近地表构造下三维区域构造信息,而无须假设区域构造为一维或二维,证明相位张量具有较强抗近地表局部非均匀构造干扰能力,能够保持更为一般的三维区域构造信息. 为了加快正演计算,同时保持一定精度,算法采用了积分方程多网格法.