基于海底电缆数据的声弹耦合介质多参数最小二乘逆时偏移（英文）

在海洋地震勘探中,海底电缆技术采集的多分量地震数据,涉及到多参数的反演与成像问题,本文针对海底电缆多分量地震数据提出了一种弹性波多参数最小二乘逆时偏移方法。该方法的波场延拓算子为混合方程,即在海水介质中采用声波方程进行波场计算,而海底固体介质的波场由纵横波形分离的矢量弹性波方程得到。在海底界面中采用声弹耦合控制方程将两种类型的方程结合起来。通过推导纵横波形分离的弹性波偏移算子、反偏移算子和梯度公式实现基于纵横波形分离的弹性波最小二乘逆时偏移方法。通过模型试算证明了该方法能够得到高质量的纵波速度和横波速度分量的成像剖面,相比与传统弹性波最小二乘逆时偏移方法,多参数耦合造成的成像串扰噪音得到了很好地压制。     

流体饱和多孔隙介质弹性波方程边界元解法研究

基于流体饱和多孔隙各向同性介质模型,本文首先推导了流体饱和多孔隙介质中弹性波传播的频率域系统动力方程及边界积分方程,然后给出了流体饱和多孔隙介质弹性波方程的基本解,最后,利用本文给出的边界元方法对流体饱和多孔隙各向同性介质中的弹性波传播进行了数值模拟.结果表明：不论是从固相位移,还是液相位移的地震合成记录都能看到明显的慢速P波,本文提出的流体饱和多孔隙介质弹性波边界元法是有效可行的.     

变密度声波方程多参数全波形反演策略

多参数全波形反演中各参数之间的相互耦合增加了反演的非线性程度.通过分析各参数之间的相互影响,提出合理的多参数反演策略是解决该问题的有效途径.本文从变密度声波方程出发,首先研究了密度在速度反演中的重要作用,然后分析了速度对密度反演的影响程度,进而提出了一种有利于速度、密度分步联合反演的策略.第一步,利用给定的初始模型对速度、密度进行同时反演,得到比较可靠的速度反演结果;第二步,利用第一步反演得到的速度和给定的初始密度作为初始模型,继续进行双参数同时反演,这样可以同时得到比较可靠的速度、密度反演结果.为了进一步提高反演精度,将第二步反演得到的速度、密度作为初始模型,再进行下一轮双参数联合反演.二维理论模型实验结果充分说明了本文提出的这种反演策略的有效性.     

各向异性介质弹性波多参数全波形反演

各向异性介质弹性波方程全波形反演过程中多参数之间的相互耦合,使得弱参数在反演过程中难得到理想的结果.本文以VTI介质为例,在各参数辐射模式分析的基础上,基于改进的散射积分算法实现目标函数梯度的直接求取,进一步构建高斯牛顿方向,实现Hessian矩阵的有效利用,以考虑Hessian矩阵非主对角线元素包含的各参数间的耦合效应,在不使用任何反演策略的情况下实现高精度的VTI介质弹性波方程多参数同步反演.同时,该方法在计算过程中无需存储庞大的核函数矩阵,且无需传统截断牛顿法中额外的正演计算,因此内存占用小,计算效率高.本文数值试验验证了该方法的有效性,为各向异性多参数全波形反演提供了一种新的解决方案.     

低频缺失情况下的弹性波包络反演（英文）

多分量地震数据中低频缺失是弹性波全波形反演中的一大难题,低频的缺失导致全波形反演无法有效恢复介质的长波长成分进而使反演陷入局部极值。为此,本文提出了反演介质纵横波速度长波长分量的弹性波包络反演方法。该方法利用包络算子具有的解调多分量数据中隐含的低频信息的能力,构造多分量地震数据的包络目标函数进行反演,用以恢复地下介质纵横波速度的长波长成分。一系列数值试验表明,即使在多分量地震数据中缺失低频信息、并且初始模型缺少先验信息的情况下,这种弹性波包络反演方法能够有效降低波形反演的非线性,可以为后续的常规弹性波全波形反演或者深度偏移提供足够精确的初始模型,且该方法对横波速度长波长分量的重建尤为有效。Mamousi-2模型的高精度纵横波速度的反演结果表明,利用该方法反演的纵横波速度作为常规弹性波全波形反演的初始模型,可以显著提高反演结果的精度。此外,本文对弹性波包络反演方法的适用性也进行了初步的研究与讨论。     

基于Born敏感核函数的速度、密度双参数全波形反演

速度、密度之间的相互耦合使得密度在多参数全波形反演中较难获得.本文将截断高斯-牛顿法用于声介质速度、密度双参数全波形反演,通过考虑近似Hessian矩阵中反映速度、密度相互作用的非主对角块元素,有效解决了多参数全波形反演中速度、密度之间的耦合问题,在不采用反演策略的情况下,仍能够获得精度较高的速度、密度反演结果.常规的截断牛顿类全波形反演通常利用一阶伴随状态法求取目标函数对模型参数的梯度,利用二阶伴随状态法或有限差分法求解Hessian-向量乘,在每一步内循环迭代过程中需要额外求解两次正演问题,计算量较大.本文基于Born近似,将梯度计算中的核函数-向量乘表示为具有明确物理意义的向量-标量乘的累加运算,同时将Hessian-向量乘转化为两次核函数-向量乘,无需额外求解正演问题,有效降低了计算量.数值实验证明了本文提出的方法的有效性.     

双相各向异性介质中弹性波传播特征研究

随着地震工程和能源地震勘探的深入发展,人们所遇到的地下介质愈来愈复杂．常规的各向异性介质理论或双相各向同性介质理论难以精确描述含流体的各向异性介质,如裂缝性气藏、含水页岩等．本文以Biot双相各向异性介质理论为基础,利用弹性平面波方程,推导出了任意双相各向异性介质中弹性波的Christoffel方程．根据Christoffel方程,计算并分析了频率对双相横向各向同性介质中弹性波的相速度、衰减、双相振幅比和偏振特征的影响．结果表明,在4类波(快纵波、慢纵波、快横波和慢横波)中,频率对慢纵波影响最大;当耗散很大时,快纵波、快横波和慢横波的流固相振幅比值近似为1．对偏振特征分析的结果表明,在双相各向异性介质中,弹性波的固相位移偏振方向与流相位移偏振方向将不再保持同向或反向,而是呈不同大小的夹角．      

基于Born敏感核函数的VTI介质多参数全波形反演

本文基于VTI介质拟声波方程,利用散射积分原理,在Born近似下导出了速度与各向异性参数的敏感核函数,同时结合作者前期研究提出的矩阵分解算法实现了一种新的VTI介质多参数全波形反演方法.矩阵分解算法通过对核函数-向量乘进行具有明确物理含义的向量-标量乘分解累加运算实现目标函数一阶方向或二阶方向的直接求取,从而避免了庞大核函数矩阵与Hessian矩阵的存储,该方法同时可以大大降低常规全波形反演在计算二阶方向时的庞大计算量.为了克服不同参数对波场影响程度的不同,本文利用作者前期在VTI介质射线走时层析成像研究中提出的分步反演策略实现了多参数联合全波形反演.理论模型实验表明,本文提出的基于Born敏感核函数的各向异性矩阵分解全波形反演方法可以获得较好的多参数反演结果.     

层析成象中的数学方法问题及其应用进展(Ⅱ)

三、基于波动方程反演的散射层析成象方法地震波的传播是服从弹性波方程的,但是要严格的从弹性波方程反演来研究散射层析成象是远远超出当前数学发展水平的,其初步探讨可见[13]。熟知弹性介质中存在两种波:压缩波(纵波)与剪切波(横波),如介质参数的变化率较小,则压缩波场u近似地满足变系数的声波方程如下     

基于多尺度迭代求解三维频率-空间域声波方程的全波形速度反演研究-理论模型

使用广义最小残量方法迭代求解三维频率-空间域声波方程,反演时使用多尺度、多重网格的策略,探讨了如何快速实现高分辨率的三维频率-空间域迭代法声波全波形速度反演.通过对理论模型进行三维频率-空间域迭代法声波全波形反演数值试验,证实该方法的计算速度快、计算效率高,反演所得速度的分辨率高.从而为基于多尺度迭代求解三维频率-空间域声波方程的全波形速度反演成像打下方法基础.     

2-D Frequency-domain Waveform Inversion of Coupled Acoustic-Elastic Media with an Irregular Interface

In order to correctly interpret marine exploration data, which contain many elastic signals such as S waves, surface waves and converted waves, we have developed both a frequency-domain modeling algorithm for acoustic-elastic coupled media with an irregular interface, and the corresponding waveform inversion algorithm. By applying the continuity condition between acoustic (fluid) and elastic (solid) media, wave propagation can be properly simulated throughout the coupled domain. The arbitrary interface is represented by tessellating square and triangular finite elements. Although the resulting complex impedance matrix generated by finite element methods for the acoustic-elastic coupled wave equation is asymmetric, we can exploit the usual back-propagation algorithm used in the frequency domain through modern sparse matrix technology. By running numerical experiments on a synthetic model, we demonstrate that our inversion algorithm can successfully recover P- and S-wave velocity and density models from marine exploration data (pressure data only).     

频率域声-弹耦合地震波波动方程有限差分方法

本文针对声-弹耦合介质,为尽可能的减少频率域正演模拟的计算内存,提高计算效率,在一阶非均质位移-应力波动方程的基础上,借助等效交错网格思想并充分考虑密度参数空间变化对地震波传播的影响,推导了声-弹耦合地震波波动方程.在流相介质和固相介质中分别采用非均质情况频率域二阶声压标量波、二阶纯位移控制方程,为保证流、固相介质间地震波能量的稳定传输和有效交换,提出了声-弹耦合界面转换过渡层方法,并详细阐述了过渡层与上下介质空间差分具体耦合方法.在与非均质纯位移波动方程正演结果对比分析的基础上,首先采用各向同性单层流相介质模型进行正演模拟验证了声-弹耦合方程数值模拟中过渡层策略的有效性和准确性,随后又数值模拟了地震波在声-弹耦合介质简单模型和复杂Marmousi2模型中的传播,验证了本文方法稳定性和准确性,同时该方法可以简单的推广到三维情况.     

富含煤层气储层的叠前地震反演预测方法研究——以山西晋东南测区为例

叠前地震反演技术能够将地震中振幅、偏移距和入射角等多种有效信息与油气的敏感参数结合起来,在有效识别油气藏"甜点"方面虽发挥了重要的作用,但对于煤层气的有效预测仍需研究.针对煤层气与石油天然气的赋存地质条件不同,本文以山西沁水盆地煤层气地震资料为例,借鉴叠前地震反演技术的多参数预测思想,通过模型正演和实测资料处理,得到纵波、横波速度和密度等不同的数据体,利用数据体和弹性参数关系式,采用AkiRichard近似公式与叠前宽角度反演联合的方法,寻找出富含煤层气储层的敏感参数.从而实现富含煤层气储层的有效预测.经与测井曲线结果对比,吻合率较高,说明了该方法具有可行性与实用性.     

Simulation of improved pure P-wave equation in transversely isotropic media with a horizontal symmetry axis

Characterizing the expressions of seismic waves in elastic anisotropic media depends on multiparameters. To reduce the complexity, decomposing the P-mode wave from elastic seismic data is an effective way to describe the considerably accurate kinematics with fewer parameters. The acoustic approximation for transversely isotropic media is widely used to obtain P-mode wave by setting the axial S-wave phase velocity to zero. However, the separated pure P-wave of this approach is coupled with undesired S-wave in anisotropic media called S-wave artefacts. To eliminate the S-wave artefacts in acoustic waves for anisotropic media, we set the vertical S-wave phase velocity as a function related to propagation directions. Then, we derive a pure P-wave equation in transversely isotropic media with a horizontal symmetry axis by introducing the expression of vertical S-wave phase velocity. The differential form of new expression for pure P-wave is reduced to second-order by inserting the expression of S-wave phase velocity as an auxiliary operator. The results of numerical simulation examples by finite difference illustrate the stability and accuracy of the derived pure P-wave equation.     

Frequency‐domain waveform modelling and inversion for coupled media using a symmetric impedance matrix

To simulate the seismic signals that are obtained in a marine environment, a coupled system of both acoustic and elastic wave equations is solved. The acoustic wave equation for the fluid region simulates the pressure field while minimizing the number of degrees of freedom of the impedance matrix, and the elastic wave equation for the solid region simulates several elastic events, such as shear waves and surface waves. Moreover, by combining this coupled approach with the waveform inversion technique, the elastic properties of the earth can be inverted using the pressure data obtained from the acoustic region. However, in contrast to the pure acoustic and elastic cases, the complex impedance matrix for the coupled media does not have a symmetric form because of the boundary (continuity) condition at the interface between the acoustic and elastic elements. In this study, we propose a manipulation scheme that makes the complex impedance matrix for acoustic–elastic coupled media to take a symmetric form. Using the proposed symmetric matrix, forward and backward wavefields are identical to those generated by the conventional approach; thus, we do not lose any accuracy in the waveform inversion results. However, to solve the modified symmetric matrix, LDLT factorization is used instead of LU factorization for a matrix of the same size; this method can mitigate issues related to severe memory insufficiency and long computation times, particularly for large‐scale problems.     

基于走时约束的分频分步零偏VSP波动方程多参数反演

在地震勘探中,描述复杂介质的正演和反演问题通常包含许多反映介质不同特性的参数.同时获得这些参数对进行更准确的岩性描述和油藏预测具有重要的理论和现实意义.为了提高频率域黏弹性波动方程的零偏VSP多参数反演的精度,本文对多参数反演的可行性进行分析,明确了目标函数的敏感程度及参数之间的耦合情况,提出了一种基于走时约束的分频分步多参数反演策略.首先利用零偏VSP资料构建先验信息,然后分别利用高、低频数据进行两步反演,也就是"三个参数反演+五个参数反演"的过程,以提高反演的稳健性和精度.利用此方法可同时得到零偏VSP数据可靠的弹性波速度、密度和品质因子,为精确的时-深关系及含油气的解释和预测奠定基础,同时也可以为地面地震叠前反演提供可靠有效的约束,增强地面地震反演精度.     

2D acoustic‐elastic coupled waveform inversion in the Laplace domain

Although waveform inversion has been intensively studied in an effort to properly delineate the Earth's structures since the early 1980s, most of the time‐ and frequency‐domain waveform inversion algorithms still have critical limitations in their applications to field data. This may be attributed to the highly non‐linear objective function and the unreliable low‐frequency components. To overcome the weaknesses of conventional waveform inversion algorithms, the acoustic Laplace‐domain waveform inversion has been proposed. The Laplace‐domain waveform inversion has been known to provide a long‐wavelength velocity model even for field data, which may be because it employs the zero‐frequency component of the damped wavefield and a well‐behaved logarithmic objective function. However, its applications have been confined to 2D acoustic media. We extend the Laplace‐domain waveform inversion algorithm to a 2D acoustic‐elastic coupled medium, which is encountered in marine exploration environments. In 2D acoustic‐elastic coupled media, the Laplace‐domain pressures behave differently from those of 2D acoustic media, although the overall features are similar to each other. The main differences are that the pressure wavefields for acoustic‐elastic coupled media show negative values even for simple geological structures unlike in acoustic media, when the Laplace damping constant is small and the water depth is shallow. The negative values may result from more complicated wave propagation in elastic media and at fluid‐solid interfaces. Our Laplace‐domain waveform inversion algorithm is also based on the finite‐element method and logarithmic wavefields. To compute gradient direction, we apply the back‐propagation technique. Under the assumption that density is fixed, P‐ and S‐wave velocity models are inverted from the pressure data. We applied our inversion algorithm to the SEG/EAGE salt model and the numerical results showed that the Laplace‐domain waveform inversion successfully recovers the long‐wavelength structures of the P‐ and S‐wave velocity models from the noise‐free data. The models inverted by the Laplace‐domain waveform inversion were able to be successfully used as initial models in the subsequent frequency‐domain waveform inversion, which is performed to describe the short‐wavelength structures of the true models.     

Inverting reservoir parameters in a two-phase fractured medium with a niche genetic algorithm

In this paper we calculate a synthetic medium surface displacement response that is consistent with real measurement data by applying the least-square principle and a niche genetic algorithm to the parameters inversion problem of the wave equation in a two-phase medium. We propose a niche genetic multi-parameter (including porosity, solid phase density and fluid phase density) joint inversion algorithm based on a two-phase fractured medium in the BISQ model. We take the two-phase fractured medium of the BISQ model in a two-dimensional half space as an example, and carry out the numerical reservoir parameters inversion. Results show that this method is very convenient for solving the parameters inversion problem for the wave equation in a two-phase medium, and has the advantage of strong noise rejection. Relative to conventional genetic algorithms, the niche genetic algorithm based on a sharing function can not only significantly speed up the convergence, but also improve the inversion precision.     

基于贝叶斯理论的叠前多波联合反演弹性模量方法

AVO反演可以获得地层岩性和流体信息,而叠前反演问题都是高维的和非适定的,因此获得可靠稳定的解对叠前反演至关重要. 本文给出了一种基于贝叶斯理论的纵波和转换波联合反演密度比和模量比的方法. 鉴于剪切模量比、体积模量比可以更好地指示油气,基于岩石物理中速度比与模量比之间的关系,将此关系式代入Zoeppritz方程的近似形式Aki-Richards公式中,得到与模量比有关的反射系数近似公式. 联合纵波和转换波,利用最小二乘准则构建目标函数,最终反演出密度比、剪切模量比、体积模量比三个参数. 在反演过程中引入贝叶斯理论,假定先验信息服从高斯分布,待求参数服从改进的Cauchy分布,并去除待求参数之间的相关性. 利用模型数据和实际数据对本文方法进行测试,并与常规的单独利用纵波数据来反演方法进行比较,结果表明联合反演稳定性更好、精度更高、抗噪音能力更强,验证了本文方法的可行性和有效性.     

Elastic reverse-time migration based on amplitude-preserving P- and S-wave separation

Imaging the PP- and PS-wave for the elastic vector wave reverse-time migration requires separating the P- and S-waves during the wave field extrapolation. The amplitude and phase of the P- and S-waves are distorted when divergence and curl operators are used to separate the P- and S-waves. We present a P- and S-wave amplitude-preserving separation algorithm for the elastic wavefield extrapolation. First, we add the P-wave pressure and P-wave vibration velocity equation to the conventional elastic wave equation to decompose the P- and S-wave vectors. Then, we synthesize the scalar P- and S-wave from the vector Pand S-wave to obtain the scalar P- and S-wave. The amplitude-preserved separated P- and S-waves are imaged based on the vector wave reverse-time migration (RTM). This method ensures that the amplitude and phase of the separated P- and S-wave remain unchanged compared with the divergence and curl operators. In addition, after decomposition, the P-wave pressure and vibration velocity can be used to suppress the interlayer reflection noise and to correct the S-wave polarity. This improves the image quality of P- and S-wave in multicomponent seismic data and the true-amplitude elastic reverse time migration used in prestack inversion.