Denudational isostatic rebound of intraplate highlands: The lachlan river valley,Australia

A range of evidence from the Lachlan valley in the southeast Australian highlands is consistent with Neogene isostatic rebound in response to denudational unloading. This evidence is found along the inland edge of the highlands in the transition zone between the highlands proper and the Lachlan's inland alluviated valley and the intracratonic Murray Basin. The amounts and rates of uplift indicated by offsets of suballuvium bedrock profiles and the long profiles of Tertiary valley-filling basalts are consistent with modelling of denudational rebound using known rates of highland denudation and basinal sedimentation, and reasonable crustal properties. The modelling shows that weak to moderately strong strong lithosphere (effective elastic thickness, T_e = 1-25 km) and strong lithosphere (T_e = 100 km) are all consistent with the observed amounts of rebound. Strong lithosphere must be broken, however, to be consistent with the field data. Even in the Australian setting, which is characterized by very low rates of denudation, isostatic rebound in response to denudational unloading must be a significant factor in maintaining highland elevation and must be incorporated in models of long-term landscape evolution. It would be expected that denudational isostatic rebound would be an even more significant component of long-term landscape evolution in areas of higher denudation rates.     

Spatial patterns of sediment delivery to valley floors: sensitivity to sediment transport capacity and hillslope hydrology relations

There is considerable interest in large‐scale spatial patterns of sediment transport in catchments, and this topic is often approached using terrain‐based modelling. In such models topography influences the discharge of overland flow and its sediment transport capacity. The sediment transport capacity of overland flow is commonly expressed as a power function of slope and discharge (i.e. q_s=k₁q^βS^γ). The relationship between discharge and contributing area can also be expressed as a power function. Several reviews reveal a limited range of values for the two exponents β and γ. In this paper we examine the sensitivity of catchment‐scale patterns of sediment delivery to valley floors to a range of sediment transport capacity and hillslope hydrology parameterizations, using two catchments on the southern tablelands of New South Wales. The results indicate that, over the limited range of β and γ identified within the literature, sediment deliveries to valley floors across the two catchments are similar for all but one of five sediment transport capacity relationships. The patterns are dominated by the trend in slope through each catchment. The sensitivity to hillslope hydrology of predicted sediment delivery patterns is strong in the catchment with systematic variation in unit hillslope area, and weak in the catchment for which there are no systematic trends in unit hillslope area. We believe there is less experimental evidence to restrict choice of hillslope hydrology parameters than there is for sediment transport capacity. Copyright © 2001 John Wiley & Sons, Ltd.     

Effects of hillslope topography on hydrological responses in a weathered granite mountain,Japan: comparison of the runoff response between the valley‐head and the side slope

To evaluate the effects of hillslope topography on storm runoff in a weathered granite mountain, discharge rate, soil pore water pressures, and water chemistry were observed on two types of hillslope: a valley‐head (a concave hillslope) and a side slope (a planar hillslope). Hydrological responses on the valley‐head and side slope reflected their respective topographic characteristics and varied with the rainfall magnitude. During small rainfall events (<35 mm), runoff from the side slope occurred rapidly relative to the valley‐head. The valley‐head showed little response in storm runoff. As rainfall amounts increased (35–60 mm), the valley‐head yielded a higher flow relative to the side slope. For large rainfall events (>60 mm), runoff from both hillslopes increased with rainfall, although that from the valley‐head was larger than that from the side slope. The differences in the runoff responses were caused by differences in the roles of lower‐slope soils and the convergence of the hillslope. During small rainfall events, the side slope could store little water; in contrast, all rainwater could be stored in the soils at the valley‐head hollow. As the amount of rainfall increased, the subsurface saturated area of the valley‐head extended from the bottom to the upper portion of the slope, with the contributions of transient groundwater via lateral preferential flowpaths due to the high concentration of subsurface water. Conversely, saturated subsurface flow did not contribute to runoff responses, and the subsurface saturated area at the side slope did not extend to the upper slope for the same storm size. During large rainfall events, expansion of the subsurface saturated area was observed in both hillslopes. Thus, differences in the concentration of subsurface water, reflecting hillslope topography, may create differences in the extension of the subsurface saturated area, as well as variability in runoff responses. Copyright © 2007 John Wiley & Sons, Ltd.     

Isostatic response of the Laccadive Ridge from admittance analysis of gravity and bathymetry data

The Laccadive Ridge (L-R), trending roughly parallel to the west coast of India, is an intriguing segment of the northernmost Chagos-Laccadive Ridge (C-L-R) system. Although crustal nature and isostatic response of the southern C-L-R is well known, there are no similar studies on the L-R. In the present study, the isostatic response of the lithosphere beneath the L-R is estimated so as to characterize its crustal nature, total crustal as well as effective elastic plate thickness and mode of compensation. Twelve gravity and bathymetry profiles across the ridge were analyzed using linear transfer function and forward model techniques. The observed admittance function within the diagnostic waveband of 250 < λ > 80 km (0.025 < k > 0.080 km⁻¹) fits well with (i) the Airy model whose average crustal thickness (T_c) and density are 17 ± 2 km and 2.7 × 10³ kg m⁻³, respectively, and (ii) the thin plate flexure model of isostasy with an effective elastic plate thickness (T_e) of 2–3 km. The estimated average crustal thickness and density are in good agreement with published seismic refraction results over the ridge. The results of the present study support an Airy model of isostasy for the L-R. The low T_e value, in view of other published results in the study area, suggests stretched and loaded continental lithosphere of the L-R during the evolution of the western continental margin of India.     

Effects of hillslope topography on runoff response in a small catchment in the Fudoji Experimental Watershed,central Japan

We investigated the role of different hillslope units with different topographic characteristics on runoff generation processes based on field observations at two types of hillslopes (0·1 ha): a valley‐head (a convergent hillslope) and a side slope (a planar hillslope), as well as at three small catchments having two types of slopes with different drainage areas ranging from 1·9 to 49·7 ha in the Tanakami Mountains, central Japan. We found that the contribution of the hillslope unit type to small catchment runoff varied with the magnitude of rainfall. When the total amount of rainfall for a single storm event was < 35 mm, runoff in the small catchment was predominantly generated from the side slope. As the amount of rainfall increased (>35 mm), the valley‐head also began to contribute to the catchment runoff, adding to runoff from the side slope. Although the direct runoff from the valley‐head was greater than that from the side slope, the contribution from the side slope was quantitatively greater than that from the valley‐head due to the proportionally larger area occupied by the side slope in the small catchment. The storm runoff responses of the small catchments reflected the change in the runoff components of each hillslope unit as the amount of rainfall increased and rainfall patterns changed. However, similar runoff responses were found for the small catchments with different areas. The similarity of the runoff responses is attributable to overlay effects of different hillslope units and the similar composition ratios of the valley‐head and side slope in the catchments. This study suggests that the relative roles of the valley‐head and side slope are important in runoff generation and solute transport as the catchment size increases from a hillslope/headwater to a small catchment. Copyright © 2011 John Wiley & Sons, Ltd.     

Isostatic Consequences of Giant Landslides on the Hawaiian Ridge

—Giant landslides, like melting glaciers, lead to a redistribution of mass which will have isostatic consequences. Three-dimensional numerical modeling experiments were devised to examine how this mass redistribution affects the isostatic flexural curve. A debris avalanche of 10–40% of pre-slide Oahu is required to account for the 1200–5000 km³ Nuuanu deposit, while only ～ 1% of pre-slide Hawaii Island is necessary to generate the 200–800 km³ Alika I and II avalanche deposits. Trials were run using 25, 30, and 40 km elastic plate thicknesses (T _e ). The island uplift resulting from the Nuuanu slide was calculated to be 23 m and 109 m for 10% and 40% volume slides, respectively, both using T _e = 25 km. A rebound of 10 m and 49 m was calculated for the same volumes, respectively, using T _e = 40 km. A greater amount of uplift is expressed direct lyover the failed flank, causing the edifice to tilt away from the calved-off portion. The landslide deposit depresses the plate several meters beneath the debris field itself. Smaller slides (e.g., Alika I and II) do not produce as much flexural response, with 17 m and 7 m uplift for T _e = 25 and 40 km, respectively. The effects of slow moving, intact slumps where the failed blocks remain relatively close to the island pedestal were examined for the case of the Hilina slump, making up approximately 10% of the Hawaii Island edifice. Perhaps more significant than the uplift for the Hilina slump, comparable to that for the 10% Nuuanu debris avalanche, is the 114 m and 56 m of downwarp beneath its massive slumped foot (T _e = 25 and 40 km, respectively). The landslide rebound process, in the case of a relatively large landslide, should be considered as an added component to the evolutionary course of oceanic islands.     

Evaluation of the SEDD model for predicting sediment yield at the Sicilian experimental SPA2 basin

In this paper a spatially distributed model of the hillslope sediment delivery processes, named the sediment delivery distributed (SEDD) model, is initially reviewed; the model takes into account the sediment delivery processes due to both the hillslope sediment transport and the effects of slope curvature. Then the rainfall and sediment yield events measured at the experimental SPA2 basin, in Sicily, are used both to calibrate the SEDD model and to verify the predictive capability of the distributed sediment delivery approach at event scale. For the SPA2 basin discretized into morphological units and stream tubes, the SEDD model is calibrated at event scale using the measurements carried out at the outlet of the experimental basin in the period December 2000–January 2001. The model calibration is used to determine a relationship useful for estimating the unique coefficient β_e of the model by rainfall erosivity factor R_e at event scale. To test the predictive capability of the β_e = f(R_e) relationship, 20 events measured in the period September 2002–December 2005 are used; the comparison between measured sediment yield values and calculated ones for all monitored events shows that the sediment delivery distributed approach has a good predictive ability at event scale. The analysis also shows that estimating β_e by the relationship β_e = f(R_e) gives a better agreement between measured and calculated sediment yields than obtained with the median value β_e,m of all 27 calculated β_e values. Finally the analysis at annual scale, for the period 2000–2005, allows the estimation of the median value β_a,m representative of the annual behaviour. This analysis shows that the sediment delivery distributed approach also has a good predictive ability at annual scale. Copyright © 2006 John Wiley & Sons, Ltd.     

Landscape form and millennial erosion rates in the San Gabriel Mountains,CA

It has been long hypothesized that topography, as well as climate and rock strength, exert first order controls on erosion rates. Here we use detrital cosmogenic ¹⁰Be from 50 basins, ranging in size from 1 to 150 km², to measure millennial erosion rates across the San Gabriel Mountains in southern California, where a strong E–W gradient in relief compared to weak variation in precipitation and lithology allow us to isolate the relationship between topographic form and erosion rate. Our erosion rates range from 35 to 1100 m/Ma, and generally agree with both decadal sediment fluxes and long term exhumation rates inferred from low temperature thermochronometry. Catchment-mean hillslope angle increases with erosion rate until ～ 300 m/Ma, at which point slopes become invariant with erosion rate. Although this sort of relation has been offered as support for non-linear models of soil transport, we use 1-D analytical hillslope profiles derived from existing soil transport laws to show that a model with soil flux linear in slope, but including a slope stability threshold, is indistinguishable from a non-linear law within the scatter of our data. Catchment-mean normalized channel steepness index increases monotonically, though non-linearly, with erosion rate throughout the San Gabriel Mountains, even where catchment-mean hillslope angles have reached a threshold. This non-linearity can be mostly accounted for by a stochastic threshold incision model, though additional factors likely contribute to the observed relationship between channel steepness and erosion rate. These findings substantiate the claim that the normalized channel steepness index is an important topographic metric in active ranges.     

Eruptive history and tectonic setting of Medicine Lake Volcano,a large rear-arc volcano in the southern Cascades

Medicine Lake Volcano (MLV), located in the southern Cascades ∼ 55 km east-northeast of contemporaneous Mount Shasta, has been found by exploratory geothermal drilling to have a surprisingly silicic core mantled by mafic lavas. This unexpected result is very different from the long-held view derived from previous mapping of exposed geology that MLV is a dominantly basaltic shield volcano. Detailed mapping shows that < 6% of the ∼ 2000 km² of mapped MLV lavas on this southern Cascade Range shield-shaped edifice are rhyolitic and dacitic, but drill holes on the edifice penetrated more than 30% silicic lava. Argon dating yields ages in the range ∼ 475 to 300 ka for early rhyolites. Dates on the stratigraphically lowest mafic lavas at MLV fall into this time frame as well, indicating that volcanism at MLV began about half a million years ago. Mafic compositions apparently did not dominate until ∼ 300 ka. Rhyolite eruptions were scarce post-300 ka until late Holocene time. However, a dacite episode at ∼ 200 to ∼ 180 ka included the volcano's only ash-flow tuff, which was erupted from within the summit caldera. At ∼ 100 ka, compositionally distinctive high-Na andesite and minor dacite built most of the present caldera rim. Eruption of these lavas was followed soon after by several large basalt flows, such that the combined area covered by eruptions between 100 ka and postglacial time amounts to nearly two-thirds of the volcano's area. Postglacial eruptive activity was strongly episodic and also covered a disproportionate amount of area. The volcano has erupted 9 times in the past 5200 years, one of the highest rates of late Holocene eruptive activity in the Cascades. Estimated volume of MLV is ∼ 600 km³, giving an overall effusion rate of ∼ 1.2 km³ per thousand years, although the rate for the past 100 kyr may be only half that. During much of the volcano's history, both dry HAOT (high-alumina olivine tholeiite) and hydrous calcalkaline basalts erupted together in close temporal and spatial proximity. Petrologic studies indicate that the HAOT magmas were derived by dry melting of spinel peridotite mantle near the crust mantle boundary. Subduction-derived H₂O-rich fluids played an important role in the generation of calcalkaline magmas. Petrology, geochemistry and proximity indicate that MLV is part of the Cascades magmatic arc and not a Basin and Range volcano, although Basin and Range extension impinges on the volcano and strongly influences its eruptive style. MLV may be analogous to Mount Adams in southern Washington, but not, as sometimes proposed, to the older distributed back-arc Simcoe Mountains volcanic field.     

Modeling of terracette‐hillslope soil moisture as a function of aspect,slope and vegetation in a semi‐arid environment

In the semi‐arid western United States, water availability plays a defining role in land use. Soil moisture, vegetation, and microtopography are key variables in the hydrologic function of these ecosystems. Previous research has not addressed the influence of site‐specific aspect, vegetation, or slope gradient on terracette soil moisture patterns in semi‐arid rangelands. Therefore, the objectives of this study were to: (1) assess the influence of terracette site aspect, vegetation cover, and slope on soil moisture; (2) conceptualize conditions at the hillslope scale given terracette morphology; and (3) estimate the extent of terracettes at a regional scale. The Simultaneous Heat and Water (SHAW) model was used to simulate soil water dynamics of terracettes given variations in site conditions. These results were coupled with time‐of‐flight laser scans to quantify terracette bench and riser percent‐area, and statewide assessments of terracette extent using digital orthoimagery and a geographical information system (GIS). Modeling results indicated site aspect had minimal influence (±0.005 m³ m^?3) on terracette soil moisture. Vegetation, represented as leaf area index (LAI), had the single‐most influential effect on terracette volumetric water content (θ _v) demonstrated by an inverse relationship of LAI to mean terracette hillslope θ _v; and slope increases of ≥15% on northern azimuths increased mean θ _v which contrasted with southern azimuths for similar slope increases. Laser scanning results indicated bench width and riser length could be estimated from mean site slope (R ² = 0.82 risers and R ² = 0.93 benches). Aerial orthoimagery/GIS assessments estimated >159 000 ha of terracettes throughout the State of Idaho, with >41 000 ha (~26%) occurring on lands managed as grazing allotments. These findings provide an increased understanding of rangeland hydrologic processes as influenced by cattle density, vegetation, and terracettes which can aide land managers in their selection and application of best management practices on these lands. Copyright © 2017 John Wiley & Sons, Ltd.     

PLAN FORM AND PROFILE FORM OF HILLSLOPES

For 27 hillslope profiles located within four first-order drainage basins on the dip slope of the South Downs in East Sussex, contour curvature (P), measured in degrees per 100 m, is highly variable within any one hillslope. Hillslopes may be described as wholly concave in plan where P is less than ?40, wholly convex in plan where P is greater than +40 and convexo-concave in plan where P lies between ?40 and +40. One measure of P taken at the profile sampling line is found to give a better estimate of P than measuring P at the steepest point on the hillslope. P is found to be significantly negatively correlated with slope in 38 per cent of cases, correlated with distance from the divide in 55 per cent of cases (positively where P <0 and negatively where P <0) and positively correlated with profile curvature in 70 per cent of cases. Implications of these correlations for hillslope process-response models are discussed.     

Rapid early Miocene acceleration of uplift in the Gangdese Belt, Xizang (southern Tibet), and its bearing on accommodation mechanisms of the India-Asia collision

Five samples from a biotite-hornblende granodiorite phase of the 42.5 Ma Quxu pluton, Gangdese batholith, southern Tibet, have been collected at 250 m vertical intervals. Biotite from these rocks yields monotonically decreasing⁴⁰Ar/³⁹Ar isochron ages with decreasing elevation of 26.8 ± 0.2, 23.3 ± 0.5, 19.7 ± 0.3, 18.4 ± 0.4,and17.8 ± 0.1Ma (T_c = 335°C). Coexisting K-feldspars have virtually identical minimum apparent⁴⁰Ar/³⁹Ar ages of 17.0 ± 0.4Ma (T_c = 285°C). These data indicate parts of southern Tibet experienced a pulse of uplift in the early Miocene with the rate of uplift rising from 0.07 to 4.4 mm/year in the interval 20 to 17 Ma. An apatite fission track age of 9.9 ± 0.9Ma from this locality constrains the average uplift rate at this site to about 0.81 mm/year between 17 and 9.9 Ma and 0.30 mm/year from 9.9 Ma to present. K-feldspar from the Dagze granite, 30 km to the east, near Lhasa, yields a minimum apparent⁴⁰Ar/³⁹Ar age of 35.9 ± 0.9Ma (T_c = 227°C) which indicates an average uplift rate there of 0.21 mm/year since then. The marked pulse of uplift of the Quxu granodiorite and the difference in uplift history between the Dagze and Quxu plutons suggests southern Tibet has experienced discrete pulses of uplift variable in both space and time. These data are not consistent with models which require a large proportion of uplift of the Tibetan plateau to have occurred in the last 2 Ma. The data support the suggestion that convergence between India and Asia was largely accommodated by tectonic escape during the opening of the South China Sea 32 to 17 Ma ago and permit distributed shortening as a mechanism for crustal thickening and uplift of this part of the Tibetan plateau subsequent to 20 Ma.     

Nannofossil age constraints for the northern KwaZulu-Natal shelf-edge wedge: Implications for continental margin dynamics, South Africa, SW Indian Ocean

Samples collected from the shelf-edge wedge using surface grab samples and the Jago submersible constrain the KwaZulu-Natal shelf-edge wedge to a late Pliocene age on the basis of the absence of Gephyrocapsa oceanica s.l. and Discoaster brouweri, and the presence of Calcidiscus macintyrei. This correlates with proposed Tertiary sea-level curves for southern Africa and indicates relative sea-level fall during the late Pliocene coupled with hinterland uplift. Exposed failure scarps in the upper portions of submarine canyons yield sediment samples of early Pleistocene ages, indicating the uppermost age of deposition of clinoform topsets exposed in the scarp walls. Partially consolidated, interbedded silty and sandy deposits of similar age outcrop in the thalweg of Leven canyon at a depth of 150 m. These sediments provide an upper age limit of the shelf-edge wedge of early Pleistocene, giving a sedimentation rate of this wedge of 162–309 m/Ma. The distribution of widespread basal-most Pleistocene sediments on the upper slope indicates that these sediments escaped major reworking during sea-level falls associated with Pleistocene glaciations and remain as relict upper slope veneers. The absence of more recent sediments suggests that this area has been a zone of sediment bypass or starvation since the early Pleistocene. Areas where younger sediments mantle deposits of early Pleistocene ages represent areas of offshore bedload parting, re-distributing younger Holocene sediment offshore and downslope.     

Analysis of the contributions of topographic,soil, and vegetation features on the spatial distributions of surface soil moisture in a steep natural forested headwater catchment

Surface soil moisture has been extensively studied for various land uses and landforms. Although many studies have reported potential factors that control surface soil moisture over space or time, the findings have not always been consistent, indicating a need for identification of the main factors. This study focused on the static controls of topographic, soil, and vegetation features on surface soil moisture in a steep natural forested headwater catchment consisting of three hillslope units of a gully area, side slope, and valley‐head slope. Using a simple correlation analysis to investigate the effects of the static factors on surface soil moisture at depths of 0–20 cm at 470 points in 13 surveys, we addressed the characteristics of surface soil moisture and its main controlling factors. The results indicated that the mean of surface soil moisture was in the decreasing order of gully area > valley‐head slope > side slope. The relationship between the mean and standard deviation of surface soil moisture showed a convex‐upward shape in the headwater catchment, a negative curvilinear shape in the gully area, and positive curvilinear shapes at the side and valley‐head slopes. At the headwater catchment and valley‐head slope, positive contributions of soil porosity and negative contributions of slope gradient and saturated hydraulic conductivity were the main controlling factors of surface soil moisture under wetter conditions, whereas positive contributions of topographic wetness index and negative contributions of vegetation density were the main controlling factors of surface soil moisture under drier conditions. At the side slope underlain by fractured bedrocks, only saturated hydraulic conductivity and vegetation density were observed to be the controlling factors. Surface soil moisture in the gully area was mainly affected by runoff rather than were static features. Thus, using hillslope units is effective for approximately estimating the hydrological behaviours of surface moisture on a larger scale, whereas dependency between the main static factors and moisture conditions is helpful for estimating the spatial distributions of surface moisture on a smaller scale.     

Isostasy of the Eastern Anatolia (Turkey) and Discontinuities of its Crust

This paper presents a probable isostatic model of the East Anatolian Region, which lies in a belt of significant plate movements. Probable locations of the horizontal and vertical discontinuities in the crust structure were determined using the normalized full gradient (NFG) method. For the purpose of explaining the mechanism that supports topography corresponding to the crust thickness in the region, calculations of effective elastic thickness (T _e) were carried out initially by utilizing admittance and misfit functions. According to these results, the effective elastic thickness value obtained was less than the crust thickness, even though the isostatic model does not conform with the Airy model. Consequently, it was assumed that there could be problems beneath the crust. Hence, the NFG method was applied on the Bouguer gravity data of the region in order to investigate probable discontinuities in the crust structure. According to the NFG results, vertical structural transitions were observed at a depth ranging between 10 and 30 km, which begin immediately north of the Bitlis Zagros Suture Zone (BZSZ) and continue in a northerly direction. The relationship between the effective elastic thickness (T _e; 13 km in average as determined in the last stage), and the seismogenic zone in the region was investigated. If the T _e value happens to be less then the crustal thickness, then one can say that there are problems in the crustal structure of the region similar to Eastern Anatolia. Indeed, when NFG results of the study area are examined, numerous vertical and horizontal discontinuities in the crust can be observed. These discontinuities, which correspond to low Bouguer gravity anomalies and shallow focal depth-earthquakes, are probably the source of the factors which rule the tectonic mechanism of the region.     

Sediment concentrations in run‐off varying with spatial scale in an agricultural subwatershed of the Chinese Loess Plateau

Information is scarce on the spatial‐scale effect on sediment concentrations in run‐off. This study addressed this issue within an agricultural subwatershed of the Chinese Loess Plateau, using data observed at a hilltop plot, three nested hillslope plots, two entire‐slope plots (a combination of hillslope and valley side slope) and the subwatershed outlet. Dominated by the splash and sheet erosions, the hilltop plot has a minimum C_ae (mean sediment concentration for all recorded events) of 45 kg m^?3. Unexpectedly, the high sediment concentrations at the hilltop do not occur at high rainfall intensities or large run‐off events because of the protection of surface soils by relatively thick sheet flows. Because of the emergence of rills, C_ae is as high as 310 kg m^?3 even on the most upper hillslope. Downslope, both C_ae and ESC (extreme large values of recorded sediment concentrations) increase; such a slope length effect attenuates with increasing slope length and event magnitude as a result of insufficient sediment availability associated with rill development. Active mass wastings ensure sufficient sediment supply and thus a spatially invariant C_ae (approximately 700 kg m^?3) and ESC (approximately 1000 kg m^?3) at the scale of the entire slope and subwatershed. Detailed examination shows that most small events experience a decrease in sediment concentrations when moving from the entire slope to the subwatershed, indicating that the spatially invariant sediment concentration is valid only for large run‐off events. This study highlights the control of the spatial scale, which determines the dominant erosional process, on erosional regime. Copyright © 2015 John Wiley & Sons, Ltd.     

New chronological constraints on the Plio-Pleistocene uplift of the Guizhou Plateau,SE margin of the Tibetan Plateau

The Guizhou Plateau represents a geomorphic transition between the Tibetan Plateau and the Yangtze River Plain. It likely formed in response to the propagation of surface uplift in southeastern Tibet during India-Eurasia continental collision. However, the uplift history of the region is unclear largely due to a lack of datable material. The bedrock geology is dominated by carbonate rocks, which contains numerous multi-level caves in the main river valleys that are linked to the river incision history. Cosmogenic ²⁶Al and ¹⁰Be burial dating of sediments in caves and river terraces from the northwestern and southern plateau reveals the fluvial chronology and provides the first direct determination of long-term river incision rates. The caves and terraces on the Liuchong River in NW Guizhou yield burial ages of between 0.41 ± 0.12 Ma and 2.85 ± 0.21 Ma, indicating an average incision rate of 57 ± 3 m/Ma. Four level caves at Libo in southern Guizhou yield burial ages of between 0.56 ± 0.16 Ma and 3.54 (+0.25/-0.22) Ma, indicating slightly slower incision rate (47 ± 5 m/Ma). These new results imply that the high elevation of the Guizhou Plateau had developed before the Late Pliocene, and that surface uplift during the Late Cenozoic was largely uniform across the region.     

The equivalent dose of different grain size quartz fractions from lakeshore sediments in the arid region of north China

Equivalent dose (D_e) values were measured by using medium aliquots of different grain size quartz fractions of five lakeshore sediments from the arid region of north China. There are two different relationships between D_e values and grain sizes of these five samples. The first relationship is that the D_e values obtained from various grain sizes are in agreement within 1 delta errors. The second relationship is that D_e values are similar to each other for fractions between 125 and 300 μm, while the D_e value of the 63–90 μm fraction is 40～55% smaller than others. For example, the D_e values obtained for sample #3 are 20.15 ± 1.19 Gy, 19.80 ± 0.83 Gy and 20.93 ± 1.06 Gy for fractions of 90–125, 125–150 and 250–300 μm respectively, but are 10.79 ± 0.84 Gy for the 63–90 μm fraction. The second relationship can't be interpreted by previous studies of both dosimetry and heterogeneous bleaching. It is deduced for sample #2, #3 and #6 that fine particles (<90 μm) intruded after the dominant sedimentation. Comparison of OSL ages from different grain size fractions of sample #2 with a radiocarbon age from the same lithologic layer supports that fractions coarser than 125 μm yield more reliable burial ages, while the fraction finer than 90 μm yields underestimated ages for some lakeshore sediments from this arid region.     

Slope profile variability in first-order drainage basins

If the three-dimensional form of a hillslope is regarded as an infinite population of two-dimensional slope profiles, values for attributes of the form of the hillslope can be determined by sampling and estimating the means of the attributes of the population of slope profiles. Twelve attributes are examined in seven first-order drainage basins located on the South Downs in East Sussex to determine necessary sample sizes. Results show that if spatial randomness is assumed the size of sample required varies considerably from one attribute to another but is commonly very large. Of four alternatives to spatial randomness that are tested, consideration of both hillslope plan form and valley asymmetry are shown not to lead to reduction in sample size. However, results do suggest that maximum slope, percentage of profile length in the range 5° to < 10°, and mean angular difference between adjacent slope segments may all be dependent upon distance of the slope profile down valley. Furthermore, initial tests of the effect of spatial autocorrelation suggest that for some attributes consideration needs to be given to this factor when determining sampling strategies.