A multi-scale approach to study the lithospheric structure of the southern Upper Rhine Graben: from seismic tomography through reflection seismics to surface geology

This paper integrates the results of different techniques—local and regional travel time tomography, reflection seismics, and surface geology. With this integration of different techniques, working on different scales, it is possible to derive a comprehensive picture of the present-day structures in the lithosphere of the Upper Rhine Graben. It is shown that the stucture of the lithosphere is dominated by structures related to the Variscan orogeny. Late stage strike-slip reactivation of the internal faults of the Rhine Graben is observed in the field. This reactivation is of dominant influence on the geomorphology in the southern end of the Upper Rhine Graben.     

Paleostress reconstructions of Jabal Hafit structures,Southeast of Al Ain City,United Arab Emirates (UAE)

This paper presents the first paleostress results obtained from displacement and fracture systems within the Lower Eocene sediments at Jabal Hafit, Abu Dhabi Emirate, UAE. Detailed investigation of Paleogene structures at Jabal Hafit reveal the existence of both extensional structures (normal faults) and compressional structures (strike-slip and reverse faults). Structural analysis and paleostress reconstructions show that the Paleogene kinematic history is characterized by the succession of four paleostress stages. Orientation of principal stresses was found from fault-slip data using an improved right-dihedra method, followed by rotational optimisation (TENSOR program).The paleostress results confirm four transtensional tectonic stages (T1–T4) which affected the study area. The first tectonic stage (T1) is characterized by S_Hmax NW–SE σ₂-orientation. This stage produced NW–SE striking joints (tension veins) and E–W to ENE–WSW striking dextral strike-slip faults. The proposed age of this stage is Early Eocene. The second stage (T2) had S_Hmax N–S σ₂-orientation. N–S striking joints and NNE–SSW striking sinistral strike-slip faults, E–W striking reverse faults and N–S striking normal faults were created during this stage. The T2 stage is interpreted to be post-Early Eocene in age. The third stage (T3) is characterized by S_Hmax E–W σ₂-orientation. This stage reactivated the E–W reverse faults as sinistral strike-slip faults and created E–W striking joints and NE–SW reverse faults. The proposed age for T3 is post-Middle Eocene. During the T3 (S_Hmax E–W σ₂-orientation) stage the NNW-plunging Hafit anticline was formed. The last tectonic stage that affected the study area (T4) is characterized by S_Hmax NE–SW σ₂-orientation. During this stage, the ENE–WSW faults were reactivated as sinistral strike-slip and reverse faults. NE–SW oriented joints were also created during the T4 (S_Hmax NE–SW σ₂-orientation) stage. The interpreted age of this stage is post-Middle Miocene time but younger than T3 (S_Hmax E–W σ₂-orientation) stage.     

Paleostress analysis of the brittle deformations on the northwestern margin of the Red Sea and the southern Gulf of Suez,Egypt

Shear fractures, dip-slip, strike-slip faults and their striations are preserved in the pre- and syn-rift rocks at Gulf of Suez and northwestern margin of the Red Sea. Fault-kinematic analysis and paleostress reconstruction show that the fault systems that control the Red Sea–Gulf of Suez rift structures develop in at least four tectonic stages. The first one is compressional stage and oriented NE–SW. The average stress regime index R' is 1.55 and S_Hmax oriented NE–SW. This stage is responsible for reactivation of the N–S to NNE, ENE and WNW Precambrian fractures. The second stage is characterized by WNW dextral and NNW to N–S sinistral faults, and is related to NW–SE compressional stress regime. The third stage is belonging to NE–SW extensional regime. The S_Hmax is oriented NW–SE parallel to the normal faults, and the average stress regime R' is equal 0.26. The NNE–SSW fourth tectonic stage is considered a counterclockwise rotation of the third stage in Pliocene-Pleistocene age. The first and second stages consider the initial stages of rifting, while the third and fourth represent the main stage of rifting.     

Hydraulic Fracturing In Situ Stress Estimations in a Potential Geothermal Site,Seokmo Island,South Korea

We conducted hydraulic fracturing (HF) in situ stress measurements in Seokmo Island, South Korea, to understand the stress state necessary to characterize a potential geothermal reservoir. The minimum horizontal principal stress was determined from shut-in pressures. In order to calculate the maximum horizontal principal stress (S _Hmax) using the classical Hubbert–Willis equation, we carried out hollow cylinder tensile strength tests and Brazilian tests in recovered cores at depths of HF tests. Both tests show a strong pressure rate dependency in tensile strengths, from which we derived a general empirical equation that can be used to convert laboratory determined tensile strength to that suitable for in situ. The determined stress regime (reverse-faulting) and S _Hmax direction (ENE–WSW) at depths below ~300 m agrees with the first order tectonic stress. However the stress direction above ~300 m (NE–SW) appears to be interfered by topography effect due to a nearby ridge. The state of stress in Seokmo Island is in frictional equilibrium constrained by optimally oriented natural fractures and faults. However, a severe fluctuation in determined S _Hmax values suggests that natural fractures with different frictional coefficients seem to control stress condition quite locally, such that S _Hmax is relatively low at depths where natural fractures with low frictional coefficients are abundant, while S _Hmax is relatively high at depths where natural fractures with low frictional coefficients are scarce.     

Brittle deformation events at the western border of the Bohemian Massif (Germany)

Investigations of brittle deformation structures, present within the crystalline rocks of the Bavarian Oberpfalz, reveal a complex late to post-Variscan crustal evolution. Upper Carboniferous (mainly Westphalian) granites were emplaced into semibrittle to brittle rocks of the ZEV (zone of Erbendorf-Vohenstrauß) and the EGZ (Erbendorf greenschist unit), respectively. From both the alignment of the granites and the direction of granite-related tension gashes a north-east-south-west extension must be assumed for the period of magmatic activities. Apart from the granite intrusions, rapid crustal uplift (about 1.5 km/my) led to an increase in the geothermal gradient from < 30 °C/km (late Variscan pre-granitic) to > 40 °C/km (late Variscan post-granitic). The increased geothermal gradient persisted during the succeeding reverse faulting which results from late Carboniferous (probably Stephanian) east-west and northeast-south-west compression. Although not evidenced directly in the area considered, strike-slip faults seem to have played an important part during the late Variscan crustal evolution, particularly in the Early Permian. The strike-slip events indicate further crustal shortening and indentation under north-south compression.A similar indentation was present in Cretaceous time. After a weak phase of Early Cretaceous reverse faulting, which results from north-south compression, strike-slip faults formed under north-west-south-east and north-south compression. All these faults, in particular the strike-slip faults, seem to be related to the Cretaceous and lowermost Tertiary convergence of the Alpine/Carpathian orogeny.A late stage of crustal extension, characterized by a radial stress tensor (₂ = ₃), is indicated through high angle normal faults which probably formed during the subsidence of the adjacent Neogene Eger Graben.     

The present-day stress field of New South Wales,Australia

The Australian continent displays the most complex pattern of present-day tectonic stress observed in any major continental area. Although plate boundary forces provide a well-established control on the large-scale (>500 km) orientation of maximum horizontal stress (S_Hmax), smaller-scale variations, caused by local forces, are poorly understood in Australia. Prior to this study, the World Stress Map database contained 101 S_Hmax orientation measurements for New South Wales (NSW), Australia, with the bulk of the data coming from shallow engineering tests in the Sydney Basin. In this study we interpret present-day stress indicators analysed from 58.6 km of borehole image logs in 135 coal-seam gas and petroleum wells in different sedimentary basins of NSW, including the Gunnedah, Clarence-Moreton, Sydney, Gloucester, Darling and Bowen–Surat basins. This study provides a refined stress map of NSW, with a total of 340 (A–E quality) S_Hmax orientations consisting of 186 stress indicators from borehole breakouts, 69 stress measurements from shallow engineering methods, 48 stress indicators from drilling-induced fractures, and 37 stress indicators from earthquake focal mechanism solutions. We define seven stress provinces throughout NSW and determine the mean orientation of the S_Hmax for each stress province. The results show that the S_Hmax is variable across the state, but broadly ranges from NE–SW to ESE–WNW. The S_Hmax is approximately E–W to ESE–WNW in the Darling Basin and Southeastern Seismogenic Zone that covers the west and south of NSW, respectively. However, the present-day S_Hmax rotates across the northeastern part of NSW, from approximately NE–SW in the South Sydney and Gloucester basins to ENE–WSW in the North Sydney, Clarence-Moreton and Gunnedah basins. Comparisons between the observed S_Hmax orientations and Australian stress models in the available literature reveal that previous numerical models were unable to satisfactorily predict the state of stress in NSW. Although clear regional present-day stress trends exist in NSW, there are also large perturbations observed locally within most stress provinces that demonstrate the significant control on local intraplate sources of stress. Local S_Hmax perturbations are interpreted to be due to basement topography, basin geometry, lithological contrasts, igneous intrusions, faults and fractures. Understanding and predicting local stress perturbations has major implications for determining the most productive fractures in petroleum systems, and for modelling the propagation direction and vertical height growth of induced hydraulic fractures in simulation of unconventional reservoirs.     

Simultaneous normal faulting and extensional flexuring during rifting: an example from the southernmost Upper Rhine Graben

The southern end of the Upper Rhine Graben (URG) is formed by a major continental transfer zone, which was localised by the reactivation of ENE-oriented basement faults of Late Palaeozoic origin. A combination of subcrop data (derived from exploration wells and reflection seismic lines) and palaeostress analysis provided new constraints on the timing and kinematics of interacting basement faults. Rifting in the southern URG began in the Upper Priabonian under regional WNW–ESE-directed extension, oriented roughly perpendicular to the graben axis. In the study area, this led to the formation of NNE-trending half-grabens. Simultaneously, ENE-trending basement faults, situated in the area of the future Rhine-Bresse Transfer Zone (RBTZ), were reactivated in a sinistrally transtensive mode. In the sedimentary cover the strike-slip component was accommodated by the development of en-échelon aligned extensional flexures. Flexuring and interference between the differently oriented basement faults imposed additional, but locally confined extension in the sedimentary cover, which deviated by as much as 90° from the regional WNW–ESE extension. The interference of regional and local stresses led to a regime approaching radial extension at the intersection between the URG and RBTZ.     

The Variscan tectonic inheritance of the Upper Rhine Graben: evidence of reactivations in the Lias,Late Eocene–Oligocene up to the recent

Processing of gravity and magnetic maps shows that the basement of the Upper Rhine Graben area is characterized by a series of NE–SW trending discontinuities and elongated structures, identified in outcrops in the Vosges, Black Forest, and the Odenwald Mountains. They form a 40 km wide, N30–40° striking, sinistral wrench-zone that, in the Visean, shifted the Variscan and pre-Variscan structures by at least 43 km to the NE. Wrenching was associated with emplacement of several generations of plutonic bodies emplaced in the time range 340–325 Ma. The sub-vertical, NE–SW trending discontinuities in the basement acted as zones of weakness, susceptible to reactivation by subsequent tectonism. The first reactivation, marked by mineralizations and palaeomagnetic overprinting along NE–SW faults of the Vosges Mountains, results from the Liassic NW–SE extension contemporaneous with the break-up of Pangea. The major reactivation occurred during the Late Eocene N–S compression and the Early-Middle Oligocene E–W extension. The NE–SW striking basement discontinuities were successively reactivated as sinistral strike-slip faults, and as oblique normal faults. Elongated depocenters appear to form in association with reactivated Variscan wrench faults. Some of the recent earthquakes are located on NE–SW striking Variscan fault zones, and show sinistral strike-slip focal mechanisms with the same direction, suggesting also present reactivation.     

Constraining stress magnitudes using petroleum exploration data in the Cooper–Eromanga Basins, Australia

The magnitude of the in situ stresses in the Cooper–Eromanga Basins have been determined using an extensive petroleum exploration database from over 40 years of drilling. The magnitude of the vertical stress (S_v) was calculated based on density and velocity checkshot data in 24 wells. Upper and lower bound values of the vertical stress magnitude are approximated by S_v = (14.39 × Z)^1.12 and S_v = (11.67 × Z)^1.15 functions respectively (where Z is depth in km and S_v is in MPa). Leak-off test data from the two basins constrain the lower bound estimate for the minimum horizontal stress (S_hmin) magnitude to 15.5 MPa/km. Closure pressures from a large number of minifrac tests indicate considerable scatter in the minimum horizontal stress magnitude, with values approaching the magnitude of the vertical stress in some areas. The magnitude of the maximum horizontal stress (S_Hmax) was constrained by the frictional limits to stress beyond which faulting occurs and by the presence of drilling-induced tensile fractures in some wells. The maximum horizontal stress magnitude can only be loosely constrained regionally using frictional limits, due to the variability of both the minimum horizontal stress and vertical stress estimates. However, the maximum horizontal stress and thus the full stress tensor can be better constrained at individual well locations, as demonstrated in Bulyeroo-1 and Dullingari North-8, where the necessary data (i.e. image logs, minifrac tests and density logs) are available. The stress magnitudes determined indicate a predominantly strike-slip fault stress regime (S_Hmax > S_v > S_hmin) at a depth of between 1 and 3 km in the Cooper–Eromanga Basins. However, some areas of the basin are transitional between strike-slip and reverse fault stress regimes (S_Hmax > S_v ≈ S_hmin). Large differential stresses in the Cooper–Eromanga Basins indicate a high upper crustal strength for the region, consistent with other intraplate regions. We propose that the in situ stress field in the Cooper–Eromanga Basins is a direct result of the complex interaction of tectonic stresses from the convergent plate boundaries surrounding the Indo-Australian plate that are transmitted into the center of the plate through a high-strength upper crust.     

Backward modeling of the rifting kinematics in the Upper Rhine Graben: insights from an elastic-perfect contact law on the restoration of a multi-bloc domain

This paper addresses the problem of volume restoration for 3-D sedimentary basin kinematic deformation. The primary purpose is methodological and concerns the use of contact mechanics with the finite element method, in order to deform a geological multi-bloc domain. This approach is applied to backward model the later stage of rifting of a segment of the southern Upper Rhine Graben (France–Germany border). Preliminary results from our modeling demonstrate the ability of the method not only to handle complex geometries, but also to successfully perform retro-deformation of a complex geological domain. In addition, they provide or confirm crucial information on the rifting evolution and tectonic features of this segment of the Upper Rhine Graben, such as the distribution of deformation, the asymmetry of the graben and a significant left-lateral strike-slip component of displacement.     

Wrench structural deformation in Ras Al Hilal-Al Athrun area, NE Libya: a new contribution in Northern Al Jabal Al Akhdar Belt

Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D₁, D₂, and D₃) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D₁ deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D₂ deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D₂ led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D₃ deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.     

The northern Upper Rhine Graben: basin geometry and early syn-rift tectono-sedimentary evolution

A large-scale transfer zone subdivides the northern parts of the Upper Rhine Graben into a northern and a southern sub-basin. These sub-basins display the geometry of asymmetric half-grabens with opposing tilt directions. The transfer zone connects the western master fault of the northern half-graben with the eastern master fault of the southern half-graben. In the northern Upper Rhine Graben early syn-rift sedimentation (Late Priabonian to Late Rupelian) was controlled by the tectonically induced subsidence of these half-grabens (autogenetic), as well as by regional third-order sea level variations (allogenetic). Within the graben, lateral changes in subsidence rates (in dip and strike direction of fault blocks) controlled the development of accommodation space and thus, sediment thickness and facies. Furthermore, a low-displacement segment along the western border fault acted as a sediment entry point. Tectonics controlled the distribution of early syn-rift deposits and the palaeogeography of the northern Upper Rhine Graben.     

Prediction of the present-day stress field in the Australian continental crust using 3D geomechanical–numerical models

The Australian continent has an enigmatic present-day stress pattern with considerable regional variability in maximum horizontal stress (S_Hmax) orientations. Previous attempts to estimate the Australian S_Hmax orientation with geomechanical–numerical models indicate that plate boundary forces provide the major controls on the contemporary stress orientations. However, these models do not satisfactorily predict the observed stress orientation in major basins throughout eastern Australia, where the knowledge of the present-day crustal stresses is of vital importance for development and management of different types of geo-reservoirs. In addition, a new comprehensive stress-data compilation in Australia, which contains 2150 data records and is the key dataset for model calibration, provides motivation to construct a new geomechanical–numerical model for Australia. Herein, we present a 3D geomechanical–numerical model that predicts both the S_Hmax orientation and the relative stress magnitudes throughout the Australian continent. Our best-fit model, with mean absolute deviation of 15°, is in good agreement with observed S_Hmax orientations and the stress regime in most areas, and shows a much better fit in areas where the stress pattern was unable to be predicted by previous published attempts. Interestingly, the best-fit model requires a significant push from the western boundary of Australian continental model, which is possible supporting evidence for the east–west-oriented mantle drag postulated by state-of-the-art global convection models, or may be generated by the excess of gravitational potential energy from Tibetan Plateau, transferred through the Indo-Australian Plate. Hence, our modelling results provide a good first-order prediction of the stress field for areas where no stress information is currently available and can be used to derive initial and boundary conditions for local and reservoir-scale 3D geomechanical models across Australia.     

Tertiary tectonics of the Dannemarie Basin, upper Rhine graben, and regional implications

Recently released seismic reflection data, together with previous seismic and well data, are used to describe the development of the Dannemarie basin, in the SW end of the Upper Rhine Graben. The Dannemarie Basin was formed during the main rifting phase of the Upper Rhine Graben as an asymmetrical graben trending NE–SW. Post-rift tectonism shifted the depocenter southward and changed the overall shape of the basin. Miocene Jura compression did not result in the formation of folds, as in the adjacent Mulhouse Horst. Strike slip faulting was dominant in the post-rift period and new faults were created, most notably the north trending and transpressional Belfort Fault. The boundary of the Dannemarie Basin with the Vosges Mountains is part of a restraining bend, which may account for the uplift of the southernmost part of the Vosges Mountains.     

Structural style and fault kinematics of the Lower Eocene Rus Formation at Jabal Hafit area,Al Ain,United Arab Emirates (UAE)

The current contribution presents aspects of the structural style and fault kinematics of the Rus Formation that expose at Jabal Hafit, Al Ain, United Arab Emirates. Although the major structure of Jabal Hafit is an anticlinal fold, fractures (joints and faults) are the prominent structure of the study area. The fractures can be interpreted as the distributed effect of deep-seated basement fault reactivation or to be as reactivation of deep-seated basement faults. These fractures were created during two main tectonic stress regimes. The first is a WNW–ESE S _Hmax strike-slip stress regime, responsible for producing E–W to ESE–WNW joints and E–W dextral strike-slip and NNE–SSW reverse faults. This stress is interpreted to be post-Early Eocene in age and related to the second phase of thrusting in the Oman Mountains in the Miocene. The second stress regime is a NNE–SSW S _Hmax transtensional (strike-slip extensive) stress regime that was responsible for N–S to NNE–SSW striking joints and NE–SW sinistral strike-slip and N–S normal faults. This regime is interpreted to be post-Middle Eocene in age. This stress was the response to the collision of the Arabian–Eurasian Plates which began during the Late Eocene and continues to the present day.     

The southeastern border of the Upper Rhine Graben: a 3D geological model and its importance for tectonics and groundwater flow

A 3D geological model of the area east of Basel on the southeastern border of the Upper Rhine Graben, consisting of 47 faults and six stratigraphic horizons relevant for groundwater flow, was developed using borehole data, geological maps, geological cross sections, and outcrop data. This model provides new insight into the discussions about the kinematics of the area between the southeastern border of the Upper Rhine Graben and the Tabular Jura east of Basel. A 3D analysis showed that both thin-skinned and thick-skinned tectonic elements occur in the modeled area and that the Anticline and a series of narrow graben structures developed simultaneously during an extensional stress-field varying from E–W to SSE–NNW, which lasted from the Middle Eocene to Late Oligocene. In a new approach the faults and horizons of the 3D geological model were transferred into discrete elements with distributed hydrogeological properties in order to simulate the 3D groundwater flow regime within the modeled aquifers. A three-layer approach with a horizontal regularly spaced grid combined with an irregular property distribution of transmissivity in depth permitted the piezometric head of the steady-state model to be automatically calibrated to corresponding measurements using more than 200 piezometers. Groundwater modeling results demonstrated that large-scale industrial pumping affected the groundwater flow field in the Upper Muschelkalk aquifer at distances of up to 2 km to the south. The results of this research will act as the basis for further model developments, including salt dissolution and solute transport in the area, and may ultimately help to provide predictions for widespread land subsidence risks.     

Stress field in the Northern Rhine area, Central Europe, from earthquake fault plane solutions

Fault plane solutions (FPS) from 110 earthquakes in the northern Rhine area with local magnitudes, ranging from 1.0 to 6.1, and occurring between 1976 and 2002 are determined. FPS are retrieved from P-wave first motions using a grid search approach allowing a detailed exploration of the parameter space. The influence of the 1D velocity model on take-off angles and resulting FPS is examined. All events were relocated with a recently developed minimum 1D model of the velocity structure [J. Geophys. Res. (2003)]. Rose diagrams of the orientation of P, T and B axes show a clear preference of trends of P and T axes at N292°E and N27°E, respectively. The majority of B axes trend in northerly directions. Plunges of P and T axes are mostly around 45° while most B axes are subhorizontal. The main direction of the maximum horizontal stress directly inferred from the fault plane solutions is N118°E.To calculate the orientations of the principal stress axes and the shape of the stress tensor, the inversion method of Gephard and Forsyth [J. Geophys. Res. 89 (1984) 9305] was applied to the whole data set and to several subsets of data. The subsets were formed by grouping events from various geological and tectonic areas and by grouping events into different depth ranges. The subset areas include the Lower Rhine Embayment, the Rhenish Massif, the middle Rhine area, the Neuwied Basin and the area known as the Stavelot–Venn Massif. Inversion of the entire data set shows some ambiguity between a strike-slip and extensional stress regime, with a vertical axis for the medium principal stress and a trend of N305°E and N35°E for the σ₁ and σ₃ axis, respectively, as the best fitting tensor. Earthquakes from the Lower Rhine Embayment and, to some degree, from the middle Rhine area indicate an extensional stress regime. In the Lower Rhine Embayment, plunge and trend of the σ₁ axis are 76° and N162°E and for the σ₃ axis 7° and N42°E. The best fitting solution for the area of the Stavelot–Venn Massif is a strike-slip regime with subhorizontal σ₁ and σ₃ axes with a trend of N316°E and N225°E, respectively. Stress orientations found here agree overall with the results from earlier studies based on smaller data sets. The directions of the maximum and minimum horizontal stresses inverted from focal mechanisms agree well with the stress field predicted by the European Stress Map. This confirms earlier interpretations that the stress field of the Rhine Graben system is controlled by plate driving forces acting on the plate boundaries. However, amplitudes of the stresses change on a local scale and with depth. Estimates of the absolute magnitude of principal stresses favor a normal faulting regime in the shallow crust (above 12-km depth) and a strike-slip regime in the lower crust.     

An overview on source rocks and the petroleum system of the central Upper Rhine Graben

International Journal of Earth Sciences - The petroleum system of the Upper Rhine Graben (URG) comprises multiple reservoir rocks and four major oil families, which are represented by four distinct...     

The south-western Black Forest and the Upper Rhine Graben Main Border Fault: thermal history and hydrothermal fluid flow

The thermal history of the south-westernmost Black Forest (Germany) and the adjacent Upper Rhine Graben were constrained by a combination of apatite and zircon fission-track (FT) and microstructural analyses. After intrusion of Palaeozoic granitic plutons in the Black Forest, the thermal regime of the studied area re-equilibrated during the Late Permian and the Mesozoic, interrupted by enhanced hydrothermal activity during the Jurassic. At the eastern flank of the Upper Rhine Graben along the Main Border Fault the analysed samples show microstructural characteristics related to repeated tectonic and hydrothermal activities. The integration of microstructural observations of the cataclastic fault gouge with the FT data identifies the existence of repeated tectonic-related fluid flow events characterised by different thermal conditions. The older took place during the Variscan and/or Mesozoic time at temperatures lower than 280°C, whereas the younger was probably contemporary with the Cenozoic rifting of the Upper Rhine Graben at temperatures not higher than 150°C.