宁蒗地区铜厂河铜矿控矿条件与热液成矿模式探讨

宁蒗地区铜厂河铜矿系喜山期隐伏斑岩体外接触带玄武岩系热液型铜矿床，其主要含矿、赋矿层位为上二叠统玄武岩组（P2β）与黑泥哨组（P2h）玄武岩系，主干控矿构造为南北向断裂体系。矿区NWW向F1断裂为阻矿构造，铜矿化均产于其下盘（南盘）；NE向F2、F3断裂将本区分成三个不同矿化特征的矿段。通过对矿区铜矿的碳、氧、硫等稳定同位素和包裹体分析及成矿热液演化特征探讨，建立了铜厂河铜矿热液成矿模式。     

江西修水县梅子坑钼矿床地质特征及成因初探

梅子坑钼矿位于九岭钨钼成矿带,为中型石英脉型钼矿床。矿区内地层和岩浆岩钼元素含量分别是克拉克值的43倍和21倍。矿体赋存于双桥山群修水组浅变质岩系中及北西向断裂控制的裂隙密集带中;矿石主要类型为石英脉型,矿石有益组分为辉钼矿,形成于石英-黄铁矿-辉钼矿-黄铜矿早期矿化阶段。矿床可能与隐伏的燕山期细粒花岗岩、花岗斑岩岩脉有成因关系,属与燕山期岩浆活动有关的中-高温热液矿床。北西向断裂密集带,硅化、云英岩化、黄铁矿化围岩蚀变,燕山期花岗岩类及双桥山群浅变质岩系,是其主要找矿标志。     

江西省万载县野猫冲铜矿控矿构造特征及找矿意义

江西省万载县野猫冲铜矿床为中低温热液（成矿流体）沿构造破碎带蚀变-蚀变岩型铜矿床。在地表地质调查、钻孔岩芯考察及岩矿鉴定的基础上,对野猫冲铜矿控矿构造进行详细研究,表明北东东向大型叠瓦状推（滑）覆构造控制矿区内各地质单元的延深与展布,北东向韧性剪切变形带控制矿区铜金矿体的展布,矿体呈似层状赋存于韧性剪切断裂之间的次级层间破碎带和小断裂带内,带内发育较强的动热变质,硅化、绢云母化和绿泥石化发育。矿石以黄铜矿为主,贫硫,成矿流体具有多期次的活动、叠加改造的特点。上栗-潭埠-宜丰断裂带自西至东已发现20余处铜多金属矿床（点）,显示该带具有巨大找矿潜力。     

江西省会昌县淘锡坝大型锡矿床构造控矿机制探讨

淘锡坝锡矿床是近年探明储量达大型的锡矿床,是一种新的锡矿类型-隐爆层间裂隙带型。文章介绍了该矿床的地质特征和矿化特征,对矿区的构造进行了重点解剖,对构造控矿机理进行了探讨,提出火山机构及北东向断裂是矿区的控岩构造,控制了白垩纪成矿花岗岩体的侵入就位。而火山岩中大范围的隐爆层间裂隙带是良好的容矿构造,矿体赋存其中呈似层状,局部膨大形成厚达数十米的＂锡矿包＂。通过研究构造与矿化富集的内在联系,总结了该矿床的成矿规律。     

江西省于都县银坑贵多金属矿田矿化特征,成矿控制及找矿方向

于都银坑贵金属矿田有破岩蚀变型,层间破碎带型,岩体接触带型、硫锰矿型、铁锰帽型、黑土我砾型等六种矿化类型。主要控矿因素为地层、岩柱、岩浆岩、构造和次火山岩体接触带构造四种。     

广东省揭西金坑铜锡铅锌矿区矿床地质特征与远景预测

广东省揭西金坑矿区目前已初步查明的（333＋334）级矿石量为2245464.8吨,其中金属量Cu：17596.7吨、Sn：5945.3吨、Pb：31536.9吨、Zn：58095.2吨。矿区主要矿体为脉状,均受滑动破碎构造带控制,总体上可分为两种类型：一类分布于灰白色花岗闪长斑岩中,在空间分布上受滑动破碎构造带控制,矿体顶底板为片理化带,蚀变强,呈脉状、透镜状产于花岗闪长斑岩体内的片理化带所产生的滑动破碎带中。另一类则产于石英片岩、粉砂岩、炭质泥岩层间滑动破碎构造带中,主要由多个连续的或间断的扁豆状、透镜体状的矿脉组成。矿体赋存严格受岩层控制,矿脉与围岩界线清楚。本文旨在通过对矿体特征、成矿机理的深入分析,为矿区为进一步扩大资源量提供理论上的启示。     

滇西北宁蒗县白牛厂铅锌矿成矿地质条件

宁蒗地区白牛厂铅锌矿区位于区域性牛窝子－罗卜地帚状结构的内旋断裂带－白牛厂弧形断裂的折拐部位。该部位喜马拉雅晚期隐伏含矿斑岩体发育,其围岩地层－下二叠统（Ｐｌｘ）灰岩亦具一定的含矿性。由白牛厂弧形断裂伴生的低级次白牛厂帚状断裂构造带又为本区矿液运移和矿体赋存提供了良好通道和有利空间。在白牛厂隐伏斑岩体与其围岩（Ｐ１ｘ灰岩）的外接触带、构造叠合地段,有望形成斑岩体外接触带热液型铅锌（银）多金属矿床。     

西藏山南错那县吉松铅矿床地质特征及成因探讨

吉松铅矿床位于喜马拉雅板片拉轨岗日陆隆壳片南部,属拉轨岗日成矿带。三年来的勘查成果显示,该矿床成矿地质条件较好,北东向断裂带及其次级断裂为主要的导矿和容矿构造,强蚀变中基性岩脉与炭质板岩的外接触带部位,特别是硅化和绿帘石化地带是矿体有利的富集部位,围岩蚀变强弱与矿化有着密切关系,矿床为硅化破碎带中低温热液交代型矿床,具有较好的找矿前景。     

广东五华白石嶂钼矿区矿床地质特征

白石嶂钼矿区归属于环太平洋钼成矿带华南褶皱系钨-铜-钼成矿省,成矿于中生代燕山期。矿床赋存于燕山二期细粒二云母花岗岩株南东端西侧与上三叠-下侏罗统地层的接触带,白石嶂断裂（F19）与杨塘断裂的交汇部位。本文从区域地质背景入手,着重研究了地层、构造、岩浆岩与成矿的关系;并对矿床的成矿专属性作了初步探讨。文章对围岩及其蚀变特征与矿体/矿石赋存特征、矿体规模之间的关系作了较深入的分析;并在分析成矿物质来源、总结矿化富集规律的基础上,结合粤东地区钼矿成矿特征,总结出本区控矿地质条件与成矿规律,为粤东地区该类矿床的寻找提供理论上的参考。     

西藏日土县材玛铁矿地质特征及找矿方向

通过对西藏日土县材玛铁矿床的调查研究表明,南羌塘拗陷带的材玛铁矿床成矿地质条件较好.经地表槽探揭露和深部钻探工程控制,发现其矿体为似层状;矿体品位和厚度沿走向和倾向变化较小;容矿岩石主要为矽卡岩、矽卡岩化灰岩;矿石类型简单,主要为磁铁矿矿石.矿化富集与侵入于上三叠统地层的燕山晚期花岗闪长岩、二长花岗岩、花岗斑岩密切相关;矿体产出部位严格受碳酸盐岩层位及其层间破碎带的控制,属接触交代型矿床.其形成与燕山晚期岩浆活动关系密切,空间分布严格受岩浆岩和断裂的控制.花岗岩类岩体与上三叠统地层的接触带和层间破碎带是寻找铁矿的有利部位,外围地区具有寻找相同类型铁矿床的远景.     

广东省大埔县银山里铅锌银矿区成矿地质特征

银山里铅锌银多金属矿区在大地构造上隶属于华南褶皱带,地处东南沿海中生代火山岩浆活动带的南部。矿体主要赋存于下侏罗统海陆交互相碎屑岩与岩浆岩的接触带上。本文从区域成矿地质背景人手,着重研究了地层、构造、岩浆岩与成矿的关系,分析了成矿物质来源,总结了矿化富集规律,提出了找矿标志。作为一个与侵入岩浆活动有关的矿床,本文旨在通过对其成矿地质环境的深入分析,提出矿床的成矿模式,为粤东地区该类矿床的寻找提供理论上的启示。     

老挝铁矿资源与成矿预测

经资料整理与实地调研：老挝已发现铁矿床（点）42处。重要矿床为万象省（P．Vientiane）万荣（Vang—viang）铁矿、川圹省（P．Xiangkhouang）富诺安（Phou．Nhouan）铁矿、万象省（P．Vientiane）帕莱（PhaLek）铁矿、甘蒙省（P．Khammouan）班农洛（BanNonglao）铁矿。重要矿床的矿体呈似层状、脉状产出,矿石质量较好,矿床属接触交代矿床、热液矿床。据地层条件、岩浆岩条件、构造条件、铁矿床（点）的分布情况,老挝划分出琅勃拉邦（Louangphabang）、孟佩（MuangPek）、桑怒（Xam—Nua）3个成矿预测区。     

福建皇山铅锌多金属矿地质特征及成矿标志

文章介绍了福建皇山铅锌矿矿区地层、构造和岩浆岩,通过对矿体地质特征的描述、岩浆岩化学成分组成特征及成矿条件分析,提出矿区找矿标志。     

Proterozoic anorogenic magmatic rocks and their constraints on mineralizations in the Bayan Obo deposit region, Inner Mongolia

The Proterozoic anorogenic magmatic rocks are well developed in the Bayan Obo deposit region. They are composed of trachyte, magnesioarfvedesonite-feldspatite, potash-rhyolite, dacite, rhyolite, quartz porphyry and trachy basalt. A lot of high-K diabase veins (dykes) are also found. These anorogenic magmatic rocks are derived from the mantle. They have lowerεNd (t) (4.52-5.88) with T(Nd DM)=1.54-1.92 Ga. Their Nd isotopic compositions and T(Nd DM)are consistent with those of ores, implying that the ore-forming materials were derived from these anorogenic magmatic rocks. The zircon U-Pb ages of the rocks are 1.8 Ga. Research results indicate that the Bayan Obo Group was replaced by the hydrothermal solution related to the anorogenic magmatic rocks, resulting in the formation of the deposit.     

Archaean metallogeny: A synthesis and review

Granitoid rocks interspersed with greenstone belts together comprise Archaean cratons throughout the world. The greenstone belts contain a wide variety of volcanic rocks which, despite cyclical variations in composition, generally change from ultramafic komatiites toward the stratigraphic base of the successions, upward through tholeiitic basalts and calc-alkaline andesites, to silici-alkalic rhyodacites toward the top. These extrusive rocks are intruded by rocks of a similar wide compositional range, which are probably comagmatic and subvolcanic to the former. The volcanic rocks are also intercalated with, and flanked by, volcaniclastic and distinctive immature sedimentary strata, including turbiditic greywacke and polymictic conglomerate. All are products of the prolonged volcanism that dominated Archaean supracrustal evolution and metallogenesis.Rare element pegmatites are associated with the Archaean granitic intrusions. Four important types of metalliferous ores, iron-manganese, nickel-chrome, gold-silver and copper-zinc occur in the greenstone belts, often co-regionally with one another in the same mining districts. Algoma type iron-formations of oxide, carbonate, silicate and sulfide facies occur throughout the volcano-sedimentary successions from base suggest common genetic processes for these ores. The Algoma type iron-formations are chemical sedimerare chromite deposits are restricted to the stratigraphically lower, ultramafic komatiites. Important gold ores are hosted primarily in the tholeiitic basalts, particularly where these are intercalated with ankeritic-pyritic chemical sedimentary strata, but smaller gold deposits are also known in stratigraphically lower ultramafic and higher felsic volcanic rocks. The largest massive base metal sulfide deposits occur in the stratigraphically higher felsic rhyodacitic members.The close spatial associations between deposits of these metals in Archaean rocks, particularly those of certain nickel, gold and base metal ores with iron-formation, together with their many similar geological characteristics, suggest common genetic processes for these ores. The Algoma type iron-formations are chemical sedimentary precipitates from ferruginous hydrothermal fluids that were periodically discharged on the sea floor during the prolonged Archaean subaqueous volcanism. The massive base metal deposits are of similar origin, essentially Cu-Zn-rich varieties of sulfide-facies iron-formation. The auriferous cherty, ankeritic or pyritic chemical sedimentary strata were also formed by similar sea floor exhalative hydrothermal activity. Although seldom of mineable gold content themselves, these constituted important, pre-enriched source rocks for later metamorphic generation of gold veins. Although many of the nickel sulfide and chromite bodies are of magmatic generation, others closely associated with iron-formation, and themselves delicately interbedded with cherty or talc-carbonate laminae, may be due to similar sea floor hydrothermal discharge that accompanied ultramafic extrusive activity. Considering their close spatial and genetic links, the occurrence of any one of these four types of deposit suggests the possibility of the others wherever the favourable Archaean host rocks are present.Different Archaean cratons however, have differing proportions of these four types of deposit, and of their distinctive host rocks. Greenstone belts in all cratons throughout the world contain the iron-formations and gold deposits. Greenstone belts of southern Africa and Western Austrialia, however, have more abundant ultramafic rocks and more important nickel-chrome deposits. Some of them may be older than comparable belts in Canada which contain more rhyodacitic rocks and more important copper-zinc ores. Some belts of Brazil and West Africa may be still younger, contain more pyroclastic-volcaniclastic rocks, lack both the nickel-chrome and copper-zinc ores, but contain important manganese in their iron-formations. These relations suggest worldwide diachroneity of Archaean greenstone belt generation, late-Archaean granitic orogeny and ensuing Proterozoic sedimentation.     

江西潭坑铅锌（银）矿床特征及成因分析

江西省潭坑铅锌（银）矿区位于北武夷铅锌银成矿带内,本文系统阐述了矿区地质和矿床特征,并对矿床的成因进行了探讨。认为本区铅锌（银）矿床,经历了火山喷发沉积和后期热液充填两大成矿期,与次火山岩体（流纹斑岩）有密切的关系,属次火山热液矿床。