Upper crustal deformation characteristics in the northeastern Tibetan Plateau and its adjacent areas revealed by GNSS and anisotropy data

The northeastern part of the Tibetan Plateau is a region where different tectonic blocks collide and intersect, and large earthquakes are frequent. Global Navigation Satellite System (GNSS) observations show that tectonic deformation in this region is strong and manifests as non-uniform deformation associated with tectonic features. S-wave splitting studies of near-field seismic data show that seismic anisotropy parameters can also reveal the upper crustal medium deformation beneath the reporting station. In this paper, we summarize the surface deformation from GNSS observations and crustal deformation from seismic anisotropy data in the northeastern Tibetan Plateau. By comparing the principal compressive strain direction with the fast S-wave polarization direction of near-field S-wave splitting, we analyzed deformation and its differences in surface and upper crustal media in the northeastern Tibetan Plateau and adjacent areas. The principal compressive strain direction derived from GNSS is generally consistent with the polarization direction of fast S-waves, but there are also local tectonic regions with large differences between them, which reflect the different deformation mechanisms of regional upper crustal media. The combination of GNSS and seismic anisotropy data can reveal the depth variation characteristics of crustal deformation and deepen understanding of three-dimensional crustal deformation and the deep dynamical mechanisms underlying it. it.     

青藏高原东北缘壳幔各向异性研究:基于SKS和Pms震相分析

利用甘肃和青海两省固定宽频带地震台记录的远震波形资料,挑选高质量SKS震相,联合使用最小切向能量方法和旋转互相关方法获得230对高信噪比分裂参数;同时对接收函数中Pms震相随方位角的变化进行拟合,得到了24个台站的地壳各向异性分裂参数.整个区域SKS分裂快波方向均值为123°,Pms分裂快波方向均值为132°,且大部分区域SKS、Pms快波方向与地表构造走向相一致,说明青藏高原东北缘以岩石圈垂直连贯变形为主,地壳上地幔相互耦合.SKS、Pms分裂时差均值分别为1.0s和0.6s,显示地壳各向异性对于SKS分裂时差有较大贡献.昆仑断裂附近Pms、SKS分裂快波方向与昆仑断裂走向基本一致,说明昆仑断裂可能是岩石圈尺度深大断裂;而阿尔金断裂东缘二者快波方向显著差异意味着阿尔金断裂在东缘可能仅为地壳尺度的断裂.     

按方位叠加接收函数分析青藏高原东南缘的地壳各向异性

在各向异性地壳中,来自Moho的P-to-S转换波(Pms)的到时不仅取决于入射角和地壳厚度,而且还随地震事件方位角而变化.地处青藏高原东南缘的川滇地区,地壳变形十分强烈.本文利用川滇地区的108个固定台站记录的远震三分量地震波形数据提取台站下方的P波接收函数,并把接收函数被校正到了同一参考震中距处(例如67°).然后按后方位角10°为间隔将接收函数叠加成一道信号以增强信噪比,并从叠加信号里拾取不同后方位角对应的Pms相的观测到时.在快波极化方向和分裂时间构成的解的平面上,能使观测到时与理论到时之差最小的点即为所求的分裂参数的位置.合成地震图和实际观测数据的实验表明,这个方法不但稳定性较好,而且误差估计也较小.我们从108个台中获得了96个Pms相的分裂参数,结果表明,川滇地区地壳各向异性十分强烈,Pms相分裂时间在0.05s±0.06s到1.27s±0.10s之间,平均值为0.54s±0.12s.地壳各向异性的快波极化方向与地表GPS速度场的差异性表明,印支块体的上下地壳之间是解耦的,而川滇菱形块体北部、松藩—甘孜和四川盆地的上下地壳之间是耦合的.然而,川滇菱形块体南部,地壳变形主要受控于小江断裂和金沙江—红河断裂.     

青藏高原东北缘地壳地震各向异性研究进展

青藏高原东北缘是青藏块体与华北块体的接触前缘部位,是研究青藏高原隆升扩张和深部动力学问题的重要区域。本文收集了青藏高原东北缘及其邻区由不同方法和不同资料获得的地壳地震各向异性结果,介绍了中上地壳和全地壳各向异性特征;结合区域地质构造、地表运动、构造应力和深部结构,分析了研究区域地壳各向异性的区域分布特征及其与地质构造的关系。结果表明,青藏高原东北缘地震各向异性存在明显的横向区域差异性,体现区域深部构造和地壳介质变形的复杂性;上地壳与全地壳的垂向差异性,反映出该区域可能存在各向异性分层现象。由于青藏高原隆升在其东北缘的伸展边界、物质运移及深部动力模式等尚处在探讨之中,结合多种数据并综合多种方法分析,有助于获得精细、准确的地震各向异性信息,为研究青藏高原隆升演化机制和深部动力模式提供有效的约束。     

青藏高原东南缘中-下地壳地震波各向异性成因——来自云南六合深源包体组构学的约束

本文通过对出露于青藏高原东南缘云南六合地区的新生代深源岩石包体(斜长角闪岩、角闪石岩和石榴石透辉岩)的显微组构和地震波各向异性的研究来约束新生代青藏高原东南缘的地壳各向异性.通过角闪石地质压力计计算得知斜长角闪岩、角闪石岩和石榴石透辉岩包体来源于地壳28～36km,为中-下地壳岩石包体.EBSD测量结果显示包体中角闪石的CPO (晶格优选定向)为Type-IV型和(100)[001]滑移,单斜辉石的CPO为SL型和(100)[001]滑移,暗示中-下地壳为高温强变形的特征.通过CPO数据计算获得斜长角闪岩、角闪石岩和石榴石透辉岩包体全岩VP各向异性为1.9%～13.3%,最大分裂的剪切波各向异性(AVS)为1.17%～8.01%.结合前人的研究结果,该地区的地壳岩石能够解释利用Pms震相测量获得的分裂延迟时间,表明云南西北地区的壳内各向异性源于中-下地壳矿物的定向排列.云南西北地区的Pms快波方向近NW-SE向分布并与SKS的快波方向相近,暗示岩石圈变形是耦合的,受控于青藏高原向东南挤出的构造背景.     

南北构造带南段上地幔各向异性特征

对布设在南北构造带南段的中国地震科学探测台阵项目一期350个宽频带流动台站和中国地震台网90个宽频带固定台站记录的远震XKS(SKS、SKKS和PKS)波形资料作偏振分析,采用最小切向能量的网格搜索法和"叠加"分析方法求得每一个台站的XKS波的快波偏振方向和快、慢波的时间延迟,获得了南北构造带南段上地幔各向异性图像.结果显示研究区的各向异性具有明显的南北分区特征,北部的快波方向为近N-S方向,而南部主要表现为近E-W方向,且北部的平均时间延迟小于南部.分析表明,具有厚岩石圈的北部的各向异性主要由岩石圈变形引起,是一种垂直连贯变形模式;具有薄岩石圈的南部的各向异性主要由软流圈地幔流引起,缅甸和巽达板片的后撤/回转作用产生了指向西南的软流圈地幔流,在岩石圈底部和软流圈之间产生了一个水平差异运动,产生了一个与简单剪切一致的软流圈变形结构,从而产生了南部观测的各向异性.     

南北构造带北段上地幔各向异性特征

对布设在南北构造带北段的中国地震科学探测台阵项目二期674个宽频带流动台站和鄂尔多斯台阵21个宽频带流动台站记录的远震XKS(SKS、SKKS和PKS)波形资料作偏振分析,采用最小切向能量的网格搜索法和"叠加"分析方法求得每一个台站的XKS波的快波偏振方向和快、慢波的时间延迟,并结合该区域出版的122个固定台站的分裂结果,获得了南北构造带北段上地幔各向异性图像.快波方向分布显示青藏高原东北缘、阿拉善块体和鄂尔多斯块体西缘的快波方向主要表现为NW—SE方向,秦岭造山带的快波方向为近E—W方向,鄂尔多斯块体内部的快波方向在北部为近N—S方向,南部表现为近E—W方向.时间延迟分布来看,鄂尔多斯块体的时间延迟不仅明显小于其周缘地区,而且小于其他构造单元,特别是在高原东北缘、阿拉善块体和鄂尔多斯块体的交汇地区的时间延迟很大,反映了构造稳定单元的时间延迟小于构造活跃单元.通过比较快波方向的横波分裂测量值与地表变形场模拟的预测值,并结合研究区地质构造和岩石圈结构特征分析表明,在青藏高原东北缘、阿拉善块体和鄂尔多斯块体西缘各向异性主要由岩石圈变形引起,地表变形与地幔变形一致,地壳耦合于地幔,是一种垂直连贯变形模式;秦岭造山带的各向异性不仅来自于岩石圈,而且其岩石圈板块驱动的软流圈地幔流作用不可忽视;鄂尔多斯块体内部深浅变形不一致,具有弱的各向异性、厚的岩石圈和构造稳定的特征,我们认为其各向异性可能保留了古老克拉通的"化石"各向异性.     

Influence of mantle convection to the crustal movement pattern in the northeastern margin of the Tibetan Plateau based on numerical simulation

Based on the recent observations about the movement and rheological structure of the lithosphere and deformation pattern of the crust, we developed a three-dimensional finite element model for the northeastern margin of the Tibetan Plateau. The model considered the impacts of both external and internal conditions, including mantle convection, gravitational potential energy and block interactions. We compared the simulated surface movement rates to the observed GPS velocities, and the results revealed that crustal movement gradually decreased toward the edge of the plateau. The factors controlling this pattern are the interactions of adjacent blocks, gravitational potential energy of the plateau, and also mantle convection as well. Additionally, according to the observation that there was an apparent difference between the horizontal movement rate of the lithosphere and convective velocity of the underlying mantle, and also based on the results of seismic anisotropy studies that suggest different strengths and deformation regimes of the lithosphere in different tectonic blocks, we proposed that the impact of mantle convection on the lithosphere may have varied in space, and introduced a parameter named mantle convection intensity factor in numerical simulations. Our simulation results show consistent surface movement rates with GPS observations, which further supports the viewpoint of seismic anisotropy studies, i.e., the degree of coupling between the crust and mantle varies significantly among different blocks.     

Shear-wave splitting beneath Yunnan area of Southwest China

Systematic analyses of seismic data recorded by the Yunnan regional seismograph network reveal significant crustal and upper mantle anisotropy. Splitting of the S phase of local earthquakes and teleseismic SKS, PKS, and SKKS phases indicates time-delays from 1.60 ms/km to 2.30 ms/km in the crust, and from 0.55 s to 1.65 s in the upper mantle which corresponds to an anisotropic layer with a thickness about between 55–165 km. The polarization orientations of fast shear waves in the crust are complicated with a predominantly north-south direction, and the mantle anisotropy has a nearly west-east direction. Our results show different deformation styles and mechanisms exist between the crust and upper mantle.     

青藏高原东南缘地震各向异性及其深部构造意义

青藏东南缘是青藏高原物质东流的通道,为了更全面了解复杂的岩石圈结构和强烈的变形特征,本文介绍了青藏东南缘岩石圈各向异性的形态,综合其他研究者得到的该区域壳幔各向异性结果,增加了部分新的资料,更新了青藏东南缘岩石圈方位各向异性图像,探讨了区域深部构造意义.
基于近场小震、远震和背景噪声资料计算结果,青藏东南缘地震各向异性展现出独特的区域空间分布和垂向层次性分布形态,展现了3个主要特征.（1）青藏东南缘上地壳各向异性与地表变形测量结果相符,快剪切波偏振方向（即快波方向）呈现与地表运动特征一致的发散性,与主压应力方向一致,但受到地质构造的影响.（2）青藏东南缘下地壳方位各向异性展现了更好的方向一致性,但方位各向异性程度相对较弱,在红河断裂带西北端部和小江断裂带下方有两个下地壳低速区,其方位各向异性程度与上地壳相当.（3）青藏东南缘岩石圈方位各向异性,呈现南、北分区特征,南北分界线大致在26°20'N,快波方向在北部近似为NS方向,在南部近似为EW方向.
本文推测：（1）在26°20'N北侧的上地幔有较厚的高速体,高速体南侧边缘呈现出近EW走向的直立墙形构造,其南侧软弱的上地幔物质在EW方向上流动,导致了岩石圈方位各向异性特征在空间发生突然的变化,快波方向由北部的NS变为南部的EW方向;（2）小江断裂带是现今的华南地块的地壳西边界,但岩石圈尺度的方位各向异性展现出的趋势性表明,华南地块的上地幔物质越过了小江断裂带到达其西侧,揭示了华南地块与青藏地块接触碰撞造成的岩石圈物质变形和上地幔软流圈物质运移的深部图像.地震各向异性能揭示区域深部构造与介质变形的信息,不同观测资料的综合分析有助于获得更清晰的各向异性三维图像.     

Seismic anisotropy beneath Southern Tibet

ＳｅｉｓｍｉｃａｎｉｓｏｔｒｏｐｙｂｅｎｅａｔｈＳｏｕｔｈｅｒｎＴｉｂｅｔＱＩＮＧ－ＴＩＡＮＬＵＩ（吕庆田），ＫＡＩ－ＹＩＭＡ（马开义），ＭＥＩＪＩＡＮＧ＇（姜枚），Ａ．ＨｉｒｎａｎｄＡ．Ｎｅｒｃｅｓｓｉａｎ（ＩｎｓｔｉｔｕｔｅｏｆＭｉｎｅｒａｌＤｅ...     

CRUSTAL ANISOTROPY AND ITS TECTONIC IMPLICATIONS IN THE CHONGQING REGION

The receiver function which carries the information of crustal materials is often used to study the shear-wave velocity of the crust as well as the crustal anisotropy. However, because of the low signal-to-noise ratio in Pms(P-to-S converted phase from the Moho), the crustal anisotropy obtained by shear-wave splitting technique for a single receiver function usually has large errors in general. Recent advance in the analysis method based on Pms arrival time varying with the back-azimuth change can effectively overcome the above defects. Thus in this paper, we utilize the azimuth variations of the Pms to study the crustal anisotropy in Chongqing region for the first time. According to the earthquake catalogue provided by USGS, seismic waveform of earthquakes with magnitude larger than 5.5 and epicenter distance range of 30°~90° between January 2015 and December 2016 are collected from 14 broadband seismic stations of Chongqing seismic network. We carry out the bootstrap resampling to test the reliability of the radial maximum energy method for the observation data. In addition, we also applied the receiver function H-Kappa analysis in this paper to study the crustal thickness and Poisson's ratio. Our results show the crustal thickness ranges from 40~50km, and there is a thin and thick crust in the southern and northern Chongqing, respectively. The crustal average Poisson's ratio ranges from 0.23~0.31, the Poisson's ratio reaches the maximum value in the central part of Chongqing, while the Poisson's ratio in the northern and southern parts of Chongqing is obviously low. We obtain the crustal anisotropy from 9 stations in total. The delay time of crustal anisotropy distributes between 0.08s and 0.48s, with the average value of 0.22s. Among them, the CHS, QIJ and WAZ stations in central Chongqing have relatively large crustal delay time(>0.3s), followed by ROC station in the western Chongqing(0.25s), while the delay time in CHK station in northern Chongqing and WAS station in southern Chongqing are 0.08s, showing relatively weak crustal anisotropy. The fast polarization directions(FPDs)also change obviously from south to north. In southern Chongqing, FPDs are dominant in NNE-SSW and NEE-SWW, while the FPDs in WAZ station change to NWW-SEE, and the FPDs appear to be NW-SE in CHK in the northern Chongqing. In general, the FPDs are sub-parallel to the strikes of faults in most areas of Chongqing areas. Combined with other results from GPS observations, tectonic stress field and XKS splitting measurements, the main conclusions can be suggested as following:The cracks preferred orientation in the upper crust is not the main source of crustal anisotropy in Chongqing area. The crust and lithospheric upper mantle in the eastern Sichuan fold belt(ESFB)and Sichuan-Guizhou fault fold belt(SGFFB)are decoupled, and the deformation characteristics in the north and south parts of ESFB and SGFFB is different. The complex tectonic deformation may exist beneath the mountain-basin boundary, causing the fast directions of crustal anisotropy different from that in other areas of ESFB and SGFFB. The faults with different strikes may weaken the strength of average crustal anisotropy in some areas. The crustal deformation in southern Dabashan nappe belt(DNB)may be mainly controlled by the fault structure.     

嘉黎断裂带活动性研究进展

嘉黎断裂是一条横贯青藏高原东南部的大型走滑断裂,在印度和欧亚板块碰撞前后通过调整应力平衡发挥着重要作用.本文根据前人对嘉黎断裂的研究成果,从地质学和地球物理学的角度,系统地总结分析嘉黎断裂带构造背景、壳幔结构、晚第四纪和现今的活动性质和速率.基于地质学方法,搜集前人在测年方面的研究结果,限定断裂的活动年限以及活动速率.同时在东段的北侧分支嘎龙寺附近,采用光释光测年法增加两个测年点,完善活动速度资料,并对断裂自西向东不同部位的走滑速率和错动断距进行对比分析.基于地球物理学观测资料,分析地震活动性和壳幔物质的速度结构、各向异性等参数,利用波形拟合方法,新增18个3~5级地震的震源机制解.结果表明,嘉黎断裂现今的构造变形主要表现为右旋走滑运动,但是在不同的分段具有显著的差异性,新生的西兴拉—达木分支是地震最活跃的区域.在此基础上,探讨青藏高原的构造演化过程,分析东构造结地区构造运动的稳定性,为川藏铁路雅安—林芝段工程建设地质灾害风险评估提供必要参考资料.     

CRYSTALLOGRAPHIC PREFERRED ORIENTATION(CPO) OF ANISOTROPIC MINERALS IN THE LITHOSPHERE AND ITS SIGNIFICANCE TO THE STUDY OFLITHOSPHERE DYNAMICS

Seismic anisotropy has been widely used to constrain deformation and mantle flow within the upper mantle of the Earth's interior, and is mainly affected by crystallographic preferred orientation(CPO)of anisotropic mineral in lithosphere. Anisotropy of peridotites caused by deformation is the main source of seismic anisotropy in the upper mantle. Olivine is the most abundant and easily deformed mineral to form CPO in peridotite, thus the CPO of olivine controls seismic anisotropy in the upper mantle. Based on simple shear experiments and studies of natural peridotites deformation, several CPO types of olivine have been identified, including A, B, C, D, E and AG-type. Studies on the deformation of olivine have shown that the CPO of olivine is mainly related to stress, water content, temperature, pressure, partial melting and melt/fluid percolation. Most of the seismic anisotropy has been explained by the A-type olivine CPO in the upper mantle, which is commonly found in upper-mantle peridotites and produced by the simple shear in dry conditions. Previous studies showed that anisotropy was attributed to the CPO of mica and amphibole in the middle-lower crust. The comparison between mantle anisotropy calculated from mineral CPO and regional anisotropy deduced from geophysical methods is therefore particularly useful for interpreting the deformation mechanisms and geodynamic processes which affect the upper mantle in different tectonic units such as subduction system, continental rift and continental collision zone in the world. The paper summarizes the characteristics of CPO and anisotropy of major anisotropic minerals in the upper mantle. Taking the lithosphere mantle xenoliths in the southeastern Tibetan plateau as an example, we perform detailed studies on the microstructures and seismic anisotropy to better understand the deformation mechanisms and upper mantle anisotropy in this region. Results show that the CPO of olivine in peridotite xenoliths in southeastern Tibetan plateau are A-type and AG-type. The mechanisms proposed for the formation of AG-type are different from that for the A-type. Therefore, the occurrence of AG-type olivine CPO pattern suggests that this CPO may record a change in deformation mechanism and tectonic environment of the lithosphere in southeastern Tibetan plateau. Provided that the strong SKS(shear wave splitting)observed in southeastern Tibetan plateau results from lithosphere mantle, the lithosphere mantle in this region is expected to be at least 130km thick and characterized by vertical foliation. Considering that the thickness of lithosphere in southeastern Tibetan plateau is much less than 130km and the lithosphere mantle cannot explain the anisotropy measured by SKS, other anisotropy sources should be considered, such as anisotropy in the asthenosphere and the oriented melt pockets(MPO)in the upper mantle. Therefore, detailed study of CPO of anisotropic mineral is essential for constraining geophysical measurements and analyzing the dynamic process of the lithosphere reasonably.     

川滇地区壳幔地震各向异性研究进展

根据川滇地区已有的地震各向异性研究结果,利用体波、面波资料的结果,分析川滇地区不同构造尺度、不同深度的地震各向异性特征。对比不同方法研究川滇地区介质各向异性的特点,探讨了该地区的介质连续性及壳幔耦合状态。分析认为,地壳上地幔各向异性的差异表明,川滇地区具有复杂的地壳及上地幔形变机制。因此,对于川滇地区壳幔地震各向异性的深入理解,需在理论上和高密度数据资料基础上加强量化分析和综合研究。     

Upper mantle anisotropy and crust-mantle deformation pattern beneath the Chinese mainland

Over the past 10 years,the number of broadband seismic stations in China has increased significantly.The broadband seismic records contain information about shear-wave splitting which plays an important role in revealing the upper mantle anisotropy in the Chinese mainland.Based on teleseismic SKS and SKKS phases recorded in the seismic stations,we used the analytical method of minimum transverse energy to determine the fast wave polarization direction and delay time of shear-wave splitting.We also collected results of shear-wave splitting in China and the surrounding regions from previously published papers.From the combined dataset we formed a shear-wave splitting dataset containing 1020 parameter pairs.These splitting parameters reveal the complexity of the upper mantle anisotropy image.Our statistical analysis indicates stronger upper mantle anisotropy in the Chinese mainland,with an average shear-wave time delay of 0.95 s;the anisotropy in the western region is slightly larger(1.01 s)than in the eastern region(0.92 s).On a larger scale,the SKS splitting and surface deformation data in the Tibetan Plateau and the Tianshan region jointly support the lithospheric deformation mode,i.e.the crust-lithospheric mantle coherent deformation.In eastern China,the average fast-wave direction is approximately parallel to the direction of the absolute plate motion;thus,the upper mantle anisotropy can be attributed to the asthenospheric flow.The area from the Ordos block to the Sichuan Basin in central China is the transition zone of deformation modes between the east and the west regions,where the anisotropy images are more complicated,exhibiting"fossil"anisotropy and/or two-layer anisotropy.The collision between the Indian Plate and the Eurasian Plate is the main factor of upper mantle anisotropy in the western region of the Chinese mainland,while the upper mantle anisotropy in the eastern region is related to the subduction of the Pacific Plate and the Philippine Sea Plate beneath the Eurasian Plate.     

长江中下游成矿带及邻区地壳剪切波速度结构和径向各向异性

收集了安徽、江西、浙江、江苏、湖北和河南6个省的区域地震台网138个宽频地震台站以及中国地质大学(北京)在长江中下游成矿带布设的19个流动宽频地震台站的三分量背景噪声数据,利用背景噪声面波层析成像方法,获得了长江中下游成矿带及其邻区地壳三维剪切波速度结构和径向各向异性特征.首先获得了5~38s周期的瑞利波和勒夫波相速度,结果显示短周期(16s)的瑞利波和勒夫波相速度与研究区内的主要地质构造单元具有良好的相关性,但在中长周期(20~30s)瑞利波相速度显示大别造山带东部为明显低速特征,而勒夫波相速度并未表现出异常特征.研究区域地壳三维有效剪切波速度和径向各向异性结果显示:苏北盆地和江汉盆地上地壳都表现为低速和正径向各向异性特征,华北克拉通东南部也表现为正径向各向异性,这可能与盆地浅部沉积层的水平层理结构相关.大别造山带中地壳显示为弱的正径向各向异性,同时其东部下地壳显示为低剪切波速度和强的正径向各向特征,可能是由于其在造山后发生了中下地壳的流变变形,引起各向异性矿物近水平排列所导致的.长江中下游成矿带内的鄂东南和安庆—贵池矿集区中地壳弱的负径向各向异性可能是由于深部岩浆向上渗透时所产生的有限应力导致结晶各向异性矿物的垂直排列所引起的.整个长江中下游成矿带下地壳都表现出正径向各向异性特征,可能是由于在伸展拉张的构造作用力下,下地壳矿物的晶格优势水平排列所引起的.     

Magnetic anisotropy of HED and Martian meteorites and implications for the crust of Vesta and Mars

We investigate the petrofabric of crustal rocks from Mars and Vesta through the measurement of the anisotropy of the magnetic susceptibility (AMS) of achondrites. Previous data are integrated with new measurements to obtain a dataset that provide macroscopic information about the magnetic fabric of 41 meteorites of the howardite–eucrite–diogenite clan (HED, falls only) and 16 Martian meteorites. The interpretation takes into account the large contribution of paramagnetism to the magnetic susceptibility of these meteorites. We use a model that allows the computation of the anisotropy degree of the population of ferromagnetic grains and provides a quantitative proxy for the degree of shape preferential orientation of these grains in HED and Martian meteorites. The results also provide quantitative information about the shape of the magnetic fabric (prolate, oblate).In HED achondrites, the ductile FeNi grains are sensitive strain recorders and our magnetic fabric data provide the first quantitative insights to the strain history of the crustal rocks of Vesta. Most HED achondrites are breccias but display a strong and spatially coherent magnetic anisotropy, indicating that intense deformation of FeNi grains took place after brecciation. The average fabric of eucrites, howardites is oblate (i.e. the texture is foliated) whereas the fabric of diogenites is more neutral. The howardite results suggest the existence of an isotropic fraction of ferromagnetic minerals that can be ascribed to the presence of carbonaceous chondrite clasts that have preserved their original magnetic fabric. In this hypothesis, howardites have an intensity of petrofabric very similar to eucrites and diogenites. Thermal metamorphism (itself possibly impact-related) plus lithostatic compaction occurring after brecciation appears as the best candidate to explain the observed petrofabric in eucrites and diogenites, whereas compaction by hypervelocity impacts may be reponsible for the fabric of howardites.Martian meteorites may still possess their primary magmatic fabric. Among Martian meteorites, basaltic shergottites and nakhlites display an oblate fabric (foliated texture) with only limited variations among each group. Olivine–phyric shergottites have a neutral fabric that points to a different petrogenesis. Nakhlites have weaker fabric intensity than shergottites. The fabric intensity is comparable to what is classically observed in terrestrial volcanic and plutonic rocks.     

蒙古中南部地区地壳各向异性及其动力学意义

利用蒙古中南部地区布设的69套宽频带数字地震仪2011年8月—2013年7月记录的远震事件,使用时间域反褶积方法提取接收函数,并挑选高质量Pms震相,通过改进的剪切波分裂方法对研究区地壳各向异性参数进行了研究,最终获取了1473对各向异性参数.经过统计分析,有48个台站可以归纳出两个方向的各向异性,11台站得到单个方向的各向异性,而剩余10个台站各向异性方向比较发散.结果显示,各向异性在蒙古中南部地壳中呈不均匀分布,有54个台站得到了NE-SW向各向异性,快波偏振方向平均值为N58°E±16°,与最大水平主应力σHmax方向和区域内主要断层走向一致,说明这部分地壳各向异性的主要成因存在于上地壳,可能与流体填充的微裂隙有关.而NW-SE向各向异性在53个台站被观测到,各向异性方向变化范围平均N132°E±16°,与研究区大部分SKS分裂快波方向具有较好的一致性,说明下地壳成岩矿物晶体定向排列是各向异性的主要成因.研究区地壳各向异性的分层特征总体上支持岩石圈受到NE-SW向挤压的动力学模型.     

滇西地区壳幔解耦与腾冲火山区岩浆活动的深部构造研究

根据青藏东部边缘的深部地球物理资料,分析了滇西地区壳幔耦合和腾冲火山区岩浆活动的深部构造特征,确认了地幔各向异性与上地幔速度结构(包括P波速度和S波速度)的内在联系,指出产生这一结果的原因与以腾冲火山区为中心的地幔热物质上涌有关:上地幔顶部平均温度升高导致介质强度降低,在印支块体的侧向挤压或印缅块体的向东俯冲作用下发生韧性变形,造成滇西地区地幔各向异性的快波方向与青藏东部地壳块体的旋转方向不一致.此外,鉴于中下地壳低速层的横向非均匀性,估计韧性流动并非贯通青藏高原的东部边缘,而是被不同的构造块体和边界断裂限定在局部地区.总体而言,滇西地区下地壳的地震波速度和电阻率偏低,具备发生韧性变形的构造条件.作为地壳和上地幔之间的解耦层,它使得青藏东部地壳块体旋转产生的构造应力未能传输至上地幔.腾冲火山区的地壳结构与不同时期的岩浆活动有关,火山区东侧的高速结构代表了上新世时期火山通道内冷凝固结的岩浆侵入体或难以挥发的高密度残留物质,火山区西侧的低速结构反映了更新世以来持续至今的岩浆活动,壳内岩浆源主要分布在10～20km的深度范围内,横向尺度约为15～20km,有可能通过地壳深部的断裂与上地幔岩浆源区相连,估计腾冲火山区下方的岩浆活动将持续进行.