Annual dissolved fluxes from Central Nepal rivers: budget of chemical erosion in the Himalayas

Annual dissolved element fluxes of Himalayan rivers from Central Nepal are calculated using published river discharge and a new set chemical data of rivers, including monsoon sampling. These are used to study the control on chemical erosion of carbonate and silicate over the whole basin. Chemical erosion of carbonate is mainly controlled by the river runoff but it can be limited by the availability of carbonate in limestone-free basin. Chemical erosion of silicate is well correlated to the runoff. However differences between High Himalayan and Lesser Himalayan basins suggest that physical erosion may also play an important control on silicate weathering. To cite this article: C. France-Lanord et al., C. R. Geoscience 335 (2003).     

L'érosion des chaînes de montagnes : influence de la sédimentation de piedmont

The applanation of mountain belts that results in peneplain is generally considered to be caused by the long-term activity of erosion. Peneplanation has been previously defined as the lowering of an elevated topography and the concomitant subduing of its relief. We propose a model following which piedmont sedimentation induces the base level rise, allowing applanation to develop at high elevation and resulting in an elevated ‘peneplain’. This model is illustrated by the morphological evolution of the southern flank of the Pyrenees during the Cainozoic. To cite this article: J. Babault, J. Van Den Driessche, C. R. Geoscience 337 (2005).     

土质陡坡降雨侵蚀的数学模型及求解方法

建立了土质陡坡降雨侵蚀的数学模型,模型包括陡坡细沟间坡面流控制方程、变沟宽陡坡细沟流控制方程、陡坡细沟间坡面侵蚀泥沙连续方程及陡坡变沟宽细沟侵蚀泥沙连续方程。通过紊流冲击分布概率确定土壤剥蚀方程,确定了泥沙源/汇项的表达形式及细沟高程与宽度的表达式。通过有限元和有限差分相结合的方法求解该数学模型,利用有限单元法对数学模型的水动力方程、运动方程及泥沙连续方程进行空间上的离散,利用有限差分法解决时间域的问题,得出了顺序求解的数值计算公式及模型数值求解的具体方法和步骤。     

Quantitative evaluation of soil processes using in situ-produced cosmogenic nuclides

In situ-produced cosmogenic nuclides provide a means for quantitative evaluation of a wide range of weathering and sediment transport processes. Although these nuclides have received attention for their power as geochronometers of surface exposure, it may be argued that they are more broadly suited for study of surface processes. In many environments, they may be used to evaluate collapse, erosion, burial, bioturbation, and creep, as well as providing a qualitative basis for distinguishing allochthonous from autochthonous materials. In addition, these nuclides can provide quantitative information on rates of erosion on scales of landforms and drainage basins. Here, we review the systematics of cosmogenic nuclide production within the Earth's surface, and present field examples demonstrating the utilization of in situ-produced cosmogenic nuclides distributions for evaluation of a range of soil evolution processes. To cite this article: E.T. Brown et al., C. R. Geoscience 335 (2003).     

基于Hkr值的北天山冰川侵蚀空间分布特征及其主控因素研究

确定冰川侵蚀的主控因素及其与各影响因素间的相互作用方式,不仅对深入认识冰川侵蚀的物理机制和理解冰川作用区地貌演化具有重要的意义,也是探讨构造、气候、地形间相互关系的根本。然而,以往的学者仅在构造活动略单一的区域研究冰川侵蚀的主控因素,致使对构造的影响认识不足,那么,构造是否是冰川侵蚀的主控因素呢？又是如何作用于冰川侵蚀？北天山第四纪冰川作用规模巨大,留下了丰富的冰川遗迹,其气候与构造条件也多样,因而成为探讨上述问题的理想区域。本文在北天山北坡自西向东选取了7个冰川流域,基于每个流域的Hkr值和冰川侵蚀影响因子的定性定量数据,分析了该区域冰川侵蚀的分布规律及其影响因素。结果表明,北天山各流域冰川侵蚀自西向东有减小趋势,该变化趋势是构造、气候、地形共同作用所致。其中,山顶高度和降水对冰川侵蚀的影响最显著,两者均通过对冰川规模施加作用来控制冰川侵蚀,而构造也可能通过影响顶点高程、积累区面积、冰川规模,进而作用于冰川侵蚀,但是其是否发挥主要作用有待进一步认识。因此,冰川规模可能才是导致北天山各冰川流域侵蚀差异的根本原因。     

Évolution récente et actuelle de la côte basque française (analyse et perspectives)

A recent multidisciplinary study, comprising existing data analysis and geomorphological and geological fieldwork, has helped clarify marine erosion processes of Pyrenean formations along the Basque Coast. An important discovery was made during our study of an alterite of regional extent, which calls into question recent and present evolution of the Basque Coast and the processes leading to coastline retreat. Modelling these factors has made it possible to propose a predictive scenario for future coastal evolution. To cite this article: A. Genna et al., C. R. Geoscience 337 (2005).     

Suitability of transport equations in modelling soil erosion for a small Loess Plateau catchment

Erosion models have not often been applied to very steep terrain such as the gully catchments of the Chinese Loess Plateau. The purpose of this research was to evaluate the suitability of a number of transport equations for use in erosion modelling under Loess Plateau conditions. To do this the equations were programmed into the LISEM model, which was applied to the 3.5 km² Danangou catchment in the rolling hills region of the Loess Plateau. Previous evaluations of transport equations used either flume tests or river sections, and did no spatial modelling. The results show that some equations predicted physically impossible concentrations (defined as above 1060 g/l). The results were evaluated by using two methods: 1) by comparing predicted and measured sedigraphs and sediment yield at the catchment outlet, and 2) by comparing the fraction of the catchment in which physically impossible transport capacities occurred. The results indicated that for the small grain sizes, high density flows and steep slopes of the gully catchments on the Loess Plateau the Shields parameter attained very high values. Furthermore, the transport threshold can usually be neglected in the equations. Most of the resulting equations were too sensitive to slope angle (Abrahams, Schoklitsch, Yalin, Bagnold, Low and Rickenmann), so that transport rates were overpredicted for steep slopes and underpredicted for gentle slopes. The Yang equation appeared to be too sensitive to grainsize. The Govers equation performed best, mainly because of its low slope dependency, and is therefore recommended for erosion models that simulate sediment transport by flowing water in conditions with small grain sizes and steep slopes.     

An investigation of the geometric controls on the morphological evolution of small-scale salt terrains,Cardona, Spain

Small-scale terrains on salt materials were surveyed with a Total Station and a series of digital elevation models (DEMs) constructed. Two sets of observations were made, eight months apart, during which the terrains underwent significant erosion. The difference in elevation shown by the DEMs, calculated by subtraction, is a measure of surface erosion of the salt terrains. The erosion rate was analysed with respect to four terrain parameters calculated in the software. High erosion rates, and their strong control by terrain slope, are demonstrated, supporting an earlier study using erosion pins. Slope profile curvature is also indicated as having some influence. The combination of scanning Total Station and DEM software is shown to be an effective tool for investigating rapid geomorphic change at this scale of study.     

喜马拉雅山脉的地质地貌特征:来自SRTM数字高程模型和降水量数据的约束

利用GTOPO30和SRTM3数字高程(DEM)数据,提取了喜马拉雅山脉(造山带)的数字高程模型并对其进行了地质地貌的初步分析。从SRTM3数字高程数据提取出坡度数据,初步分析了喜马拉雅山脉坡度和高程的特征。数字高程和坡度图清楚地展现了喜马拉雅大型断裂带(构造边界)的空间分布特征。分析了中国气象局下属的西藏、青海、四川和云南4省区气象观测台站55年来的年平均降水量观测数据、喜马拉雅山脉南坡的年平均降水量数据、喜马拉雅DEM和裂变径迹数据,发现喜马拉雅山脉从东至西,年平均降水量逐渐减少,地形起伏逐渐变小,而高程渐次升高,与此同时剥蚀速率降低;从北至南,年平均降水量逐渐增加,地形起伏增大,高程快速降低,而剥蚀速率则急剧升高。这充分说明了喜马拉雅年平均降水量大的地区,地表剥蚀作用相对较强,年平均降水量小的地区,地表剥蚀作用则较弱,即:在喜马拉雅地区,长周期的地表剥蚀过程(可长达数个百万年时间尺度)和短周期(仅仅50年)的降水量观测是耦合的。     

Measuring alluvial fan sensitivity to past climate changes using a self‐similarity approach to grain‐size fining,Death Valley,California

The effects of climate change on eroding landscapes and the terrestrial sedimentary record are poorly understood. Using mountain catchment–alluvial fan systems as simple analogues for larger landscapes, a wide range of theoretical studies, numerical models and physical experiments have hypothesized that a change in precipitation rate could leave a characteristic signal in alluvial fan sediment flux, grain size and down‐system fining rate. However, this hypothesis remains largely untested in real landscapes. This study measures grain‐size fining rates from apex to toe on two alluvial fan systems in northern Death Valley, California, USA, which each have well‐exposed modern and ca 70 ka surfaces, and where the long‐term tectonic boundary conditions can be constrained. Between them, these surfaces capture a well‐constrained temporal gradient in climate. A grain‐size fining model is adapted, based on self‐similarity and selective deposition, for application to these alluvial fans. This model is then integrated with cosmogenic nuclide constraints on catchment erosion rates, and observed grain‐size fining data from two catchment‐fan systems, to estimate the change in sediment flux from canyon to alluvial fan that occurred between mid‐glacial and modern interglacial conditions. In a fan system with negligible sediment recycling, a ca 30% decrease in precipitation rate led to a 20% decrease in sediment flux and a clear increase in the down‐fan rate of fining, supporting existing landscape evolution models. Consequently, this study shows that small mountain catchments and their alluvial fan stratigraphy can be highly sensitive to orbital climate changes over <10⁵ year timescales. However, in the second fan system it is observed that this sensitivity is completely lost when sediment is remobilized and recycled over a time period longer than the duration of the climatic perturbation. These analyses offer a new approach to quantitatively reconstructing the effects of past climate changes on sedimentation, using simple grain‐size data measured in the field.     

数字地形分析技术在分布式水文建模中的应用

论述了在栅格数字高程模型（DEM）的基础上，利用数字地形分析技术来完成地形评价、河网指示、流域分割、子流域参数化等项工作的理论与方法。并结合江西潋水河流域的实际工作进行了详细的说明。研究结果表明，通过数字地形分析的方法，利用栅格DEM实现流域离散化并从中提取分布式水文模型所需要的输入参数是一种行之有效的手段。     

Large earthquake-triggered landslides and mountain belt erosion: The Tsaoling case,Taiwan

The 1999 Chi-Chi earthquake triggered the catastrophic Tsaoling landslide in central Taiwan. We mapped the landslide area and estimated the landslide volume, using high-resolution digital elevation model from airborne LiDAR (Light Detection and Ranging), satellite images, aerial photographs and topographic maps. The comparison between cut and fill volumes, about 0.126 and 0.150 km³, respectively, suggests a volume increase of 19% due to decompaction during landsliding. In April 2002, the cut and fill volumes were about 0.137 and 0.116 km³, respectively. These estimates suggest that 2.5 years after the event, the volume of landslide debris removed by river erosion was nearly 0.045 km³. Such a large value highlights the importance of landslide processes for erosion and long-term denudation in the Taiwan mountain belt. To cite this article: R.-F. Chen et al., C. R. Geoscience 337 (2005).     

青藏高原东南缘构造地貌、活动构造和下地壳流动假说

利用高精度的SRTM 数字高程模型（DEM）,定量勾画出青藏高原东南缘大尺度地形地貌的特征。分析表明,高原东南缘地貌特征为“负地形”,即海拔高程与地形坡度,与地形起伏度之间均为负相关关系,与高原中部的“正地形”--海拔高程或地形坡度与地形起伏度之间呈正相关关系,形成鲜明对比。但是,在高原东南缘,在河谷之间保留有高海拔、低起伏的残留面。这些残留面与高原内部的平坦面具相似的渐变地貌特征,从腹地的正地形逐渐变为川西的高海拔平坦面与深切河谷相间的负地形。虽然随着河流下切深度往南逐渐增加,残留面虽越来越少,但仍然可以识别,最终终止在雅砻江逆冲断裂带附近,该断裂带以南地区没有明显负地形特征。北东向展布的雅砻江逆冲断裂带对应着50～200 km宽的地形相对陡变带。综合区域新构造和构造地貌研究的最新成果表明： 1）雅砻江逆冲断裂带可能代表着现今正经受侵蚀改造和弱化的高原老边界,该边界以北和以南地区抬升历史不同; 2）三江地区的峰值抬升期已过,目前以侵蚀为主。虽然不能排除与河流侵蚀对应的均衡反弹抬升作用,但具有真正意义的地壳增厚型的构造抬升较弱。国际上流行的高原东缘下地壳流动模式的依据之一是从高原内外流分界线到南中国海,存在一个区域上延伸数千公里的抬升前低海拔“类夷平面”的残留面。地貌特征,构造和地质综合分析都表明高原东缘不存在这样的类夷平面,不支持解释高原东缘地形演化和相应构造变形的下地壳流动模式。     

Hillslope Topography from Unconstrained Photographs

Quantifications of Earth surface topography are essential for modeling the connections between physical and chemical processes of erosion and the shape of the landscape. Enormous investments are made in developing and testing process-based landscape evolution models. These models may never be applied to real topography because of the difficulties in obtaining high-resolution (1–2 m) topographic data in the form of digital elevation models (DEMs). Here we present a simple methodology to extract the high-resolution three-dimensional topographic surface from photographs taken with a hand-held camera with no constraints imposed on the camera positions or field survey. This technique requires only the selection of corresponding points in three or more photographs. From these corresponding points the unknown camera positions and surface topography are simultaneously estimated. We compare results from surface reconstructions estimated from high-resolution survey data from field sites in the Oregon Coast Range and northern California to verify our technique. Our most rigorous test of the algorithms presented here is from the soil-mantled hillslopes of the Santa Cruz marine terrace sequence. Results from three unconstrained photographs yield an estimated surface, with errors on the order of 1 m, that compares well with high-resolution GPS survey data and can be used as an input DEM in process-based landscape evolution modeling.     

Growing mountain ranges and quenched river networks

River networks in mountain ranges owe their existence to the competing effects of tectonic uplift and climate-controlled erosion. However, paradoxically, the universal geometric properties of river networks are independent of both tectonics and climate. Currently, this paradox has still not been resolved. Here we propose a solution that consists in considering that the geometry of river networks is established on the lowland margins of incipient uplifts, and is quenched into the erosion zone as the mountain belts widen with time. In our model, the geometry of river networks simply reflects the downward coalescence of alluvial rivers on un-dissected surfaces outside of mountain belts, and is therefore independent of erosion processes. To cite this article: S. Castelltort, G. Simpson, C. R. Geoscience 338 (2006).     

Analysing laser‐scanned digital terrain models of gravel bed surfaces: linking morphology to sediment transport processes and hydraulics

The grain‐scale topography of a sediment surface is a key component of a fluvial system, affecting aspects including sediment transport, flow resistance and ecology. However, its effect is hard to quantify because of the need for grain‐scale elevation data from in situ fluvial gravel surfaces which are difficult to collect. The sediment surface properties are, therefore, commonly estimated as a function of the sediment grain‐size distribution; however, because of additional factors, such as grain packing and shape, there is not necessarily a unique relationship between the two. A new methodology has been developed that uses terrestrial laser scanning to collect grain‐scale topographic data from in situ fluvial gravel surfaces, from which digital terrain models are created. This paper investigates methods of analysing such digital terrain models, and possible sedimentological interpretations that can be drawn from the analysis. Eleven digital terrain models from exposed gravel surfaces in two contrasting rivers (the River Feshie and Bury Green Brook) were analysed by calculating: the distribution of surface elevations, semivariograms, surface inclinations, surface slopes and aspects and grain orientation. The distribution of surface elevations and surface slope and aspect analysis were found to be most informative. In the River Feshie, grain‐size was interpreted as being a dominant control on sediment surface structure and gravel imbrication was identified. In Bury Green Brook, the location of the digital terrain models within the riffle–pool sequence was the dominant control on surface structure and grain orientation. Such digital terrain models therefore provide a new approach to measuring and quantifying the topography of fluvial sediment surfaces.     

Rivers, chemical weathering and Earth's climate

We detail the results of recent studies describing and quantifying the large-scale chemical weathering of the main types of continental silicate rocks: granites and basalts. These studies aim at establishing chemical weathering laws for these two lithologies, describing the dependence of chemical weathering on environmental parameters, such as climate and mechanical erosion. As shown within this contribution, such mathematical laws are of primary importance for numerical models calculating the evolution of the partial pressure of atmospheric CO₂ and the Earth climate at geological timescales. The major results can be summarized as follow: (1) weathering of continental basaltic lithologies accounts for about 30% of the total consumption of atmospheric CO₂ through weathering of continental silicate rocks. This is related to their high weatherability (about eight times greater than the granite weatherability); (2) a simple weathering law has been established for basaltic lithologies, giving the consumption of atmospheric CO₂ as a function of regional continental runoff, and mean annual regional temperature; (3) no such simple weathering law can be proposed for granitic lithologies, since the effect of temperature can only be identified for regions displaying high continental runoff; (4) a general law relating mechanical erosion and chemical weathering has been validated on small and large catchments. The consequences of these major advances on the climatic evolution of the Earth are discussed. Particularly, the impacts of the onset of the Deccan trapps and the Himalayan orogeny on the global carbon cycle are reinvestigated. To cite this article: B. Dupré et al., C. R. Geoscience 335 (2003).     

Late Weichselian and Holocene sediment flux and sedimentation rates in Andfjord and Vågsfjord,North Norway

Late Weichselian and Holocene sediment flux and sedimentation rates in a continental‐shelf trough, Andfjord, and its inshore continuation, Vågsfjord, North Norway, have been analysed. The study is based on sediment cores and high‐resolution acoustic data. Andfjord was deglaciated between 14.6 and 13 ¹⁴C kyr BP (17.5 and 15.6 calibrated (cal.) kyr BP), the Vågsfjord basin before 12.5 ¹⁴C kyr BP (14.7 cal. kyr BP), and the heads of the inner tributary fjords about 9.7 ¹⁴C kyr BP (11.2 cal. kyr BP). In Andfjord, five seismostratigraphical units are correlated to a radiocarbon dated lithostratigraphy. Three seismostratigraphical units are recognised in Vågsfjord. A total volume of 23 km³ post‐glacial glacimarine and marine sediments was mapped in the study area, of which 80% are of Late Weichselian origin. Sedimentation rates in outer Andfjord indicate reduced sediment accumulation with increasing distance from the ice margin. The Late Weichselian sediment flux and sedimentation rates are significantly higher in Vågsfjord than Andfjord. Basin morphology, the position of the ice front and the timing of deglaciation are assumed to be the reasons for this. Late Weichselian sedimentation rates in Andfjord and Vågsfjord are comparable to modern subpolar glacimarine environments of Greenland, Baffin Island and Spitsbergen. Downwasting of the Fennoscandian Ice Sheet, and winnowing of the banks owing to the full introduction of the Norwegian Current, caused very high sedimentation rates in parts of the Andfjord trough at the Late Weichselian–Holocene boundary. Holocene sediment flux and sedimentation rates in Andfjord are about half the amount found in Vågsfjord, and about one‐tenth the amount of Late Weichselian values. A strong bottom current system, established at the Late Weichselian–Holocene boundary, caused erosion of the Late Weichselian sediments and an asymmetric Holocene sediment distribution. Copyright © 2002 John Wiley & Sons, Ltd.     

Influence of a glacial buzzsaw on the height and morphology of the Cascade Range in central Washington State, USA

Analysis of climatic and topographic evidence from the Cascade Range of Washington State indicates that glacial erosion limits the height and controls the morphology of this range. Glacial erosion linked to long-term spatial gradients in the ELA created a tilted, planar zone of 373 cirques across the central part of the range; peaks and ridges now rise ≤600 m above this zone. Hypsometric analysis of the region shows that the proportion of land area above the cirques drops sharply, and mean slopes >30° indicate that the areas above the cirques may be at or near threshold steepness. The mean plus 1σ relief of individual cirque basins (570 m) corresponds to the ∼600-m envelope above which peaks rarely rise. The summit altitudes are set by a combination of higher rates of glacial and paraglacial erosion above the ELA and enhanced hillslope processes due to the creation of steep topography. On the high-precipitation western flank of the Cascades, the dominance of glacial and hillslope erosion at altitudes at and above the ELA may explain the lack of a correspondence between stream-power erosion models and measured exhumation rates from apatite (U-Th/He) thermochronometry.     

The use of landscape evolution models in mining rehabilitation design

Landscape evolution models can be useful tools for the evaluation of rehabilitation designs for post-mining landscapes. When calibrated for the erodible material, landscape evolution models can predict sediment loss over entire landscapes (i.e. tonnes/hectare/year), method of erosion (i.e. slope wash, gullying) and also where on a hillslope erosion is likely to occur. The models provide the ability to examine simple hillslopes through to complex whole landscapes. These models can also be used for a probabilistic risk assessment of rehabilitation design for high-risk situations such as tailings dams. Importantly, unlike other erosion models they allow the eroded landscape to be visualised. This paper outlines the capabilities of the SIBERIA landscape evolution model for the rehabilitation of mining landscapes and proposes a probabilistic approach for risk assessment and site stability.