Carbonate platform growth and cyclicity at a terminal Proterozoic passive margin, Infra Krol Formation and Krol Group, Lesser Himalaya, India

Abstract The Infra Krol Formation and overlying Krol Group constitute a thick (< 2 km), carbonate-rich succession of terminal Proterozoic age that crops out in a series of doubly plunging synclines in the Lesser Himalaya of northern India. The rocks include 18 carbonate and siliciclastic facies, which are grouped into eight facies associations: (1) deep subtidal; (2) shallow subtidal; (3) sand shoal; (4) peritidal carbonate complex; (5) lagoonal; (6) peritidal siliciclastic–carbonate; (7) incised valley fill; and (8) karstic fill. The stromatolite-rich, peritidal complex appears to have occupied a location seaward of a broad lagoon, an arrangement reminiscent of many Phanerozoic and Proterozoic platforms. Growth of this complex was accretionary to progradational, in response to changes in siliciclastic influx from the south-eastern side of the lagoon. Metre-scale cycles tend to be laterally discontinuous, and are interpreted as mainly autogenic. Variations in the number of both sets of cycles and component metre-scale cycles across the platform may result from differential subsidence of the interpreted passive margin. Apparently non-cyclic intervals with shallow-water features may indicate facies migration that was limited compared with the dimensions of facies belts. Correlation of these facies associations in a sequence stratigraphic framework suggests that the Infra Krol Formation and Krol Group represent a north- to north-west-facing platform with a morphology that evolved from a siliciclastic ramp, to carbonate ramp, to peritidal rimmed shelf and, finally, to open shelf. This interpretation differs significantly from the published scheme of a basin centred on the Lesser Himalaya, with virtually the entire Infra Krol–Krol succession representing sedimentation in a persistent tidal-flat environment. This study provides a detailed Neoproterozoic depositional history of northern India from rift basin to passive margin, and predicts that genetically related Neoproterozoic deposits, if they are present in the High Himalaya, are composed mainly of slope/basinal facies characterized by fine-grained siliciclastic and detrital carbonate rocks, lithologically different from those of the Lesser Himalaya.     

Long-distance correlation between tectonic-controlled, isolated carbonate platforms by cyclostratigraphy and sequence stratigraphy in the Devonian of South China

During the early Middle Devonian in South China, an extensive carbonate platform was broken up through extension to create a complex pattern of platforms, and interplatform basins. In Givetian and Frasnian carbonate successions, five depositional facies, including peritidal, restricted shallow subtidal, semi‐restricted subtidal, intermediate subtidal and deep subtidal facies, and 18 lithofacies units are recognized from measured sections on three isolated platforms. These deposits are arranged into metre‐scale, upward‐shallowing peritidal and subtidal cycles. Nine third‐order sequences are identified from changes in cycle stacking patterns, vertical facies changes and the stratigraphic distribution of subaerial exposure indicators. These sequences mostly consist of a lower transgressive part and an upper regressive part. Transgressive packages are dominated by thicker‐than‐average subtidal cycles, and regressive packages by thinner‐than‐average peritidal cycles. Sequence boundaries are transitional zones composed of stacked, high‐frequency, thinner‐than‐average cycles with upward‐increasing intensity of subaerial exposure, rather than individual, laterally traceable surfaces. These sequences can be further grouped into catch‐up and keep‐up sequence sets from the long‐term (second‐order) changes in accommodation and vertical facies changes. Catch‐up sequences are characterized by relatively thick cycle packages with a high percentage of intermediate to shallow subtidal facies, and even deep subtidal facies locally within some individual sequences, recording long‐term accommodation gain. Keep‐up sequences are characterized by relatively thin cycle packages with a high percentage of peritidal facies within sequences, recording long‐term accommodation loss. Correlation of long‐term accommodation changes expressed by Fischer plots reveals that during the late Givetian to early Frasnian increased accommodation loss on platforms coincided with increased accommodation gain in interplatform basins. This suggests that movement on faults resulted in the relative uplift of platforms and subsidence of interplatform basins. In the early Frasnian, extensive siliceous deposits in most interplatform basins and megabreccias at basin margins correspond to exposure disconformities on platforms.     

Depositional processes of the Zhushadong and Mantou formations (Early to Middle Cambrian), Shandong Province,China: roles of archipelago and mixed carbonate–siliciclastic sedimentation on cycle genesis during initial flooding of the North China Platform

To understand the depositional processes and environmental changes during the initial flooding of the North China Platform, this study focuses on the Lower to Middle Cambrian Zhushadong and Mantou formations in Shandong Province, China. The succession in the Jinan and Laiwu areas comprises mixed carbonate and siliciclastic deposits composed of limestone, dolostone, stromatolite, thrombolite, purple and grey mudstone, and sandstone. A detailed sedimentary facies analysis of seven well‐exposed sections suggests that five facies associations are the result of an intercalation of carbonate and siliciclastic depositional environments, including local alluvial fans, shallowing‐upward carbonate–siliciclastic peritidal cycles, oolite dominant shoals, shoreface and lagoonal environments. These facies associations successively show a transition from an initially inundated tide‐dominated carbonate platform to a wave‐dominated shallow marine environment. In particular, the peritidal sediments were deposited during a large number of depositional cycles. These sediments consist of lime mudstone, dolomite, stromatolite and purple and grey mudstones. These shallowing‐upward cycles generally resulted from carbonate production in response to an increase of accommodation during rising sea‐level. The carbonate production was, however, interrupted by frequent siliciclastic input from the adjacent emergent archipelago. The depositional cycles thus formed under the influence of both autogenetic changes, including sediment supply from the archipelago, and allogenic control of relative sea‐level rise in the carbonate factory. A low‐relief archipelago with an active tidal regime allowed the development of tide‐dominated siliciclastic and carbonate environments on the vast platform. Siliciclastic input to these tidal environments terminated when most of the archipelago became submerged due to a rapid rise in sea‐level. This study provides insights on how a vast Cambrian carbonate platform maintained synchronous sedimentation under a tidal regime, forming distinct cycles of mixed carbonates and siliciclastics as the system kept up with rising relative sea‐level during the early stage of basin development in the North China Platform.     

From Cycles to Sequences:Sequence Stratigraphy and Relative Sea Level Change for the Late Cambrian of the North China Platform

In the Late Cambrian, the North China Platform was a typical carbonate ramp platform. The Upper Cambrian of the northern part of the North China Platform is famous for the development of bioherm limestones and storm calcirudites and can be divided from bottom to top into the Gushan, Changshan and Fengshan formations. In this set of strata, the deep-ramp mudstone and marls and the shallow-ramp packstones and grainstones constitute many carbonate meter-scale cycles of subtidal type. More tidal-flat dolomites axe developed in the Upper Cambrian of the southern margin of the North China platform, in which limestone and dolomite beds also constitute many carbonate meter-scale cycles of the peritidal type. These cycles are marked by a variety of litho-facies successions. There are regularly vertical stacking patterns of meter-scale cycles in long-term third-order sequences, which is the key to discerning such sequences. Third-order sequence is marked by a particular sedimentary-facies succession that is the result of the environment-changing process of deepening and shoaling, which is genetically related to third-order sea level changes. Furthermore, four third-order sequences can be grouped in the Upper Cambrian of the North China Platform. The main features of these four third-order sequences in the northern part of the platform can be summarized as follows: firstly, sequence-boundaries are characterized by drowning unconformities; secondly, the sedimentary-facies succession is generally constituted by one from deep-ramp facies to shallow-ramp facies; thirdly, a succession of “CS (?) HST” (i.e., “condensed section and highstand system”) forms these four third-order sequences. The chief features for the third-order sequences in the southern part of the North China Platform comprises: more dolomites are developed in the HSTs of third-order sequences and also developed more carbonate meter-scale cycles of peritidal types; the sedimentary-facies succession of the third-order sequences is marked by “shallow ramp-tidal flat”; the sequence boundaries are characterized by exposure punctuated surfaces. According to the changes for the third-order sequences from the north to the south, a regular sequence-stratigraphic framework can be established. From cycles to sequences, the study of sequence stratigraphy from litho-facies successions to sedimentary-facies successions exposes that as follows: meter-scale cycles that are used as the basic working unit actually are litho-facies successions formed by the mechanism of a punctuated aggradational cycle, and third-order sequences that are constituted by regularly vertical stacking patterns of meter-scale cycles are marked by sedimentary-facies successions. On the basis of the changing curve of water depth at each section, the curve of the relative third-order sea level changes in the late Cambrian of the North China Platform can be integrated qualitatively from changing curve of water depth. The correlation of Late Cambrian long-term sea level changes between North China and North America demonstrates that there are not only similarities but also differences, reflecting control of long-term sea level changes both by global eustacy and by regional factors.     

Facies Associations and Discontinuous Surfaces in the Syringothyris Limestone Formation of Tethyan Margin of Gondwana,Kashmir

The early Carboniferous sedimentation of the Tethyan Margin of Gondwana in the Kashmir Himalaya represents alternating siliciclastic - carbonate succession consisting of distinct stratigraphic sequences which are bounded by discontinuities. The discontinuities in the sedimentation are related to environmental changes in the form of subaerial exposure, subaqueous erosion, subaqueous omission or changes in texture and facies. These distinct surface zones or time significant boundaries can be correlated across the depositional platform. Low stand, high stand and transgressive sedimentation units in the lower and middle parts of early Carboniferous Syringothyris Limestone Formation in Banihal area have been recognised. This is explained by superposition of high frequency and low amplitude sea level fluctuations on a large-scale trend under greenhouse conditions during the early Carboniferous period. The facies associations present in the early Carboniferous succession of the Himalaya broadly represent intertidal (peritidal), shallow subtidal, deeper subtidal, off-shore-slope and deeper environments. Discontinuities that are interpreted as progradational, retrogradational and aggradational phases of sedimentation bound these facies associations. This formation represents continental margin depositional setting which is authenticated by deposition of siliciclastic sediments. This marginal depositional setting is greatly affected by numerous dynamic processes including tectonic and other active sea as well as continental processes. The records of all those processes in this formation reflect the eustatic changes in sea level. These periodic eustatic changes have generated the various discontinuities, stratigraphic sequences or systems tracts. Overall it appears that interplay of many processes such as sediment supply, thermal and tectonic activity, eustatic and climatic changes in the Kashmir Tethyan depositional basin generated these distinct depositional sequences during the early Carboniferous period.     

Cross-platform architecture of a sequence boundary in mixed siliciclastic-carbonate lithofacies, Middle Cambrian, southern Great Basin, USA

Stratigraphic analysis of mixed siliciclastic-carbonate lithofacies within the Middle Cambrian Bonanza King Formation of the southern Great Basin reveals three distinct facies associations that record a range of depositional environments from semi-arid tidal flats to deeper subtidal, restricted lagoons. Stratigraphic trends, cross-platform facies variations and correlation of individual surfaces across 250 km of the study area suggest that these mixed lithofacies were deposited in three temporally distinct phases. (1) Extensive progradation of mixed peritidal environments culminated in a prolonged episode of subaerial exposure marked by an areally extensive intraclast breccia (0·5–1·2 m thick) that we interpret to be a major Type 1 sequence-bounding disconformity. (2) Abrupt flooding of the exposed platform resulted in the deposition of mixed deeper subtidal lithofacies, including a condensed interval of fissile, fossiliferous shale. (3) Progressive shallowing and aggradational accumulation was accompanied by a decrease in siliciclastics and a shift to pure carbonate deposition. Deep-water siliciclastics and megabreccias record deposition along the base-of-slope off the Middle Cambrian shelf-edge, and are interpreted to represent lowstand deposits emplaced during the prolonged episode of subaerial exposure of the shallow shelf. The presence of fine siliciclastics in both peritidal facies and sharply overlying deeper subtidal facies of the study interval within the Bonanza King suggests a variable, but relatively continuous, influx of terrigenous material throughout an extended period of accommodation change, apparently asynchronous with respect to the predictive model of reciprocal sedimentation. We suggest that the primary siliciclastic source changed with relative sea-level position. During lowered sea level, aeolian processes acting upon the unvegetated Cambrian craton transported fine siliciclastics onto peritidal and shallow-subtidal environments. During higher sea level, coastal siliciclastic reservoirs supplied sediment that was transported for long distances by geostrophic currents flowing along the submerged platform. As opposed to many Cambro-Ordovician grand cycles that are commonly interpreted to consist of a transgressive shaly half-cycle grading upward into a regressive carbonate half-cycle, the sequence boundary within this Middle Cambrian succession occurs within siliciclastic-rich, mixed lithofacies rather than in adjoining purer carbonates, implying that some ‘grand cycles’ should not be considered synonymous with ‘sequences’. Interbasinal correlations of the Type 1 sequence boundary within the mixed unit are speculative, primarily because of the inherent imprecision of available trilobite biostratigraphy. However, there is evidence that an extended episode of subaerial exposure may have been continent-wide during the Ehmaniella trilobite biochron.     

Shallowing-upward sequences in Purbeckian peritidal carbonates (lowermost Cretaceous, Swiss and French Jura Mountains)

Purbeckian carbonates in the Swiss and French Jura (Goldberg Formation, lower Berriasian) comprise shallow-subtidal, intertidal, supratidal, low-energy, high-energy, marine, brackish, freshwater, and hypersaline facies. These facies are arranged in small (0–2–1.5 m thick) sequences which display a dominant shallowing-upward component, and which form the fundamental units of the highly structured Purbeckian sedimentary record. Six types of small-scale sequences can be recognized. A: intertidal to supratidal overprinting of shallow lagoonal facies; B: algal-marsh sequence with frequent dolomitization; C: sabkha sequence, often associated with collapse breccia; D: tidal-flat sequence with desiccation features; E: lacustrine sequence; F: terrestrial overprinting of subtidal or intertidal facies. Episodic event deposits such as tempestites are superimposed] Thin transgressive beds which rework elements of the underlying facies are frequently found at the base of the sequences. Green marls and black pebbles are common at the top and indicate long subaerial exposure. The sequences are often incomplete, as subtidal facies may be absent, or their upper part can be eroded. Lateral facies changes are common, which is due to the very shallow and partly emergent Purbeckian platform where various depositional environments were juxtaposed. However, many sequence boundaries are well developed and can be correlated over large parts of the study area. The Purbeckian shallowing-upward sequences were generated by climatically controlled sea-level changes. Autocyclic processes occurred locally, but were overprinted by drops of sea-level affecting the entire platform. The small-scale sequences are most probably related to the 20 000-year cycle of the precession of the equinoxes. Larger sequences with usually well-developed emersion surfaces are attributed to the 100 000 and 400 000-year eccentricity cycles of the Earth's orbit. Identification and correlation of sequence boundaries makes it possible to set up a framework of isochronous surfaces (which often cut across facies boundaries), and thus to interpret in detail the palaeogeographic, sedimentological and diagenetic evolution of the Purbeckian peritidal carbonate environments.     

Sedimentation in shallow to deep water carbonate environments across a sequence boundary: effects of a fall in sea-level on the evolution of a carbonate system (Ladinian-Carnian, eastern Lombardy, Italy)

In the Concarena‐Pizzo Camino Massif (Lombardy Basin, Southern Alps, Italy) the lateral transition from Ladinian‐Carnian carbonate platforms to coeval intraplatform basins is preserved. The succession records the sedimentological evidence of a sea‐level fall on a flat‐topped platform with a narrow marginal reef rim and its effects in the adjacent deeper‐water basin. Repeated high‐frequency exposures of the platform top are recorded by a peritidal–supratidal succession that overlies subtidal inner platform facies of the former highstand system tract (HST). On the slope and in the basin, the sea‐level fall is recorded by a few metre thick succession of bioclastic packstones. These facies directly lie on coarse clinostratified breccia bodies (slope facies of the former HST) or on resedimented, well‐bedded, dark laminated limestones (basinal facies of the HST). This facies distribution indicates that during the sea‐level fall carbonate production on the platform top decreased rapidly and that sedimentation in the basin was mainly represented by condensed facies. Microfacies record an enrichment, during low stand, in pelagic biota (packstones with radiolarians and spiculae), whereas the occurrence of platform‐derived, shallow‐water materials is limited to thin lenses of reworked and micritized Fe‐rich oolites and bioclasts (mainly pelecypods and echinoderms). The facies association in the Concarena‐Pizzo Camino Massif demonstrates that a highly‐productive carbonate factory was almost completely turned off during the emergence of the platform top at a sequence boundary, leading to low‐stand starvation in the basin. The reconstruction of the stratigraphic evolution of the Concarena‐Pizzo Camino carbonate platform therefore represents a significant case history for the study of the behaviour of ancient carbonate systems during a fall in sea‐level, independent of its origin (eustatic or tectonic).     

Controls and predictability of carbonate facies architecture in a Lower Jurassic three-dimensional barrier-shoal complex (Djebel Bou Dahar, High Atlas, Morocco)

Spatial information on lithofacies from outcrops is paramount for understanding the internal dynamics, external controls and degree of predictability of the facies architecture of shallow‐water carbonate‐platform tops. To quantify the spatial distribution and vertical stacking of lithofacies within an outer‐platform shoal‐barrier complex, integrated facies analysis and digital field technologies have been applied to a high‐relief carbonate platform exposed in the Djebel Bou Dahar (Lower Jurassic, High Atlas, Morocco). The outer platform is characterized by subtidal, cross‐bedded, coarse grainstone to rudstone grading into supratidal, pisoidal packstone‐rudstone with tepees that together formed a 350 to 420 m wide shoal‐barrier belt parallel to the margin. This belt acted as a topographic high separating a restricted lagoon from the subtidal, open marine region. Low‐energy tidal flats developed on the protected flank of the barrier facing the lagoon. Lithofacies patterns were captured quantitatively from outcrop and integrated into a digital outcrop model. The outcrop model enabled rapid visualization of field data and efficient extraction of quantitative data such as widths of facies belts. In addition, the spatial heterogeneity was captured in multiple time slices, i.e. during different phases of cyclic base‐level fluctuations. In general, the lateral continuity of lithofacies is highest when relative water depth increased during flooding of the platform top, establishing low‐energy subtidal conditions across the whole platform, and when the accommodation space was filled with tidal flat facies. Heterogeneity increased during deposition of the relief‐building bar facies that promoted spatial diversification of depositional environments during the initial phases of accommodation space creation. Cycles commonly are composed of a thin transgressive tidal flat unit, followed by coated‐grain rudstone bar facies. Lateral to the bar facies, pisoidal‐grainstone beach deposits accumulated. These bar and beach deposits were overlain by subtidal lagoonal facies or would grow through the maximum flooding and highstand. There the bars either graded into supratidal pisoidal facies with tepees (when accommodation space was filled) or were capped by subaerial exposure (due to a sea‐level fall). Modified embedded Markov analysis was used to test the presence of common ordering in vertical lithofacies stacking in a stationary interval (constant depositional mode). Analysis of individual sections did not reveal any ordering, which may be related to the limited thickness of these sections. Composite sections, however, rejected the null hypothesis of randomness. The addition of stratigraphically significant information to the Markov analysis, such as exposure surfaces and lateral dimensions of facies bodies, strengthens the verdict of unambiguous preferential ordering. Through careful quantitative reconstruction of stratal geometry and facies relationships in fully integrated digital outcrop models, accurate depositional models could be established that enhanced the predictability of carbonate sediment accumulation.     

Palaeokarst development in a lower Frasnian (Devonian) platform succession,Canning Basin,northwestern Australia

Recognition of palaeokarst in the oldest exposed Devonian (Givetian ‐ lower Frasnian) platform successions of the Canning Basin reef complexes has eluded investigators for over forty years. The first evidence for palaeokarst, developed on microbial mud‐mounds in a single stratigraphic horizon, is documented and records an episode of exposure during early carbonate platform development. Surface palaeokarst features are scalloped surfaces, solution pits and a pipe, underlain by fenestral limestone with sediment‐filled fossil moulds and vugs. The platform succession has variably developed metre‐scale cycles which are composed predominantly of shallowing‐upward subtidal facies, with some cycles having fenestral peloidal mudstone caps. Changes in facies type and stratigraphic arrangement up the succession define two deepening‐upward units (～70 and 180 m thick), with the palaeokarst surface representing emergence following rapid shallowing at the top of the lower unit. The stratigraphic position of the palaeokarst between these two units suggests it may represent a sequence boundary. This may have been caused by a low‐magnitude eustatic fall or footwall‐uplift event superimposed on a rapidly subsiding basin margin.     

The St George Group (Lower Ordovician) of western Newfoundland: tidal flat island model for carbonate sedimentation in shallow epeiric seas

The St George Group consists of peritidal carbonate rocks deposited on the continental shelf of North America bordering the ancient Iapetus Ocean. These Lower Ordovician rocks are similar to other lower Palaeozoic limestones and dolostones that accumulated in epeiric seas and veneer cratonic areas worldwide. A wide variety of facies in the St George is grouped into seven lithotopes, interpreted to represent supratidal, intertidal and shallow, high- and low-energy subtidal environments. Rapid lateral facies changes can be observed in some field exposures, and demonstrated by correlation of closely spaced sections. The stratigraphic array of these lithotopes, although too irregular to be simplified into shallowing-upward cycles, suggests that they were deposited as small tidal flat islands and banks. Shallow subtidal areas around islands generated sediment and permitted tidal exchange. Tidal flat islands were somewhat variable in character at any one time, and evolved with changing regional hydrographic conditions. The St George rocks suggest an alternative theory of carbonate sedimentation in large, shallow epeiric seas, namely as small islands and banks built by processes that operated in a tidal regime. Furthermore, this island model provides a framework for a mechanism of cyclic carbonate sedimentation, by which small-scale, peritidal cycles represent tidal flat islands that accreted vertically and migrated laterally as local sediment supply from neighbouring subtidal areas waxed and waned during relatively constant subsidence.     

Facies Analysis, Sequence Stratigraphy and Diagenetic Studies of the Jurassic Carbonates of the Kohat Basin, Northwest Pakistan: Reservoir Implications

The present study deals with the depositional facies, diagenetic processes and sequence stratigraphy of the shallow marine carbonates of the Samana Suk Formation, Kohat Basin, in order to elucidate its reservoir quality. The Samana Suk Formation consists of thin to thick-bedded, oolitic, bioclastic, dolomitic and fractured limestone. Based on the integration of outcrop, petrographic and biofacies analyses, the unit is thought to have been deposited on a gentle homoclinal ramp in peritidal, lagoonal and carbonate shoal settings. Frequent variations in microfacies based sea-level curve have revealed seven Transgressive Systems Tracts (TSTs) and six Regressive Systems Tracts (RSTs). The unit has undergone various stages of diagenetic processes, including mechanical and chemical compaction, cementation, micritization, dissolution and dolomitization. The petrographic analyses show the evolution of porosity in various depositional and diagenetic phases. The fenestral porosity was mainly developed in peritidal carbonates during deposition, while the burial dissolution and diagenetic dolomitization have greatly enhanced the reservoir potential of the rock unit, as is further confirmed by the plug porosity and permeability analyses. The porosities and permeabilities were higher in shoal facies deposited in TSTs, as compared to lagoonal and peritidal facies, except for the dolomite in mudstone, deposited during RSTs. Hence good, moderate and poor reservoir potential is suggested for shoal, lagoonal and peritidal facies, respectively.     

Impact of dynamic sedimentation on facies heterogeneities in Lower Cretaceous peritidal deposits of central east Oman

This study, based in the Haushi‐Huqf area of central east Oman, aims to characterize the controls on facies distribution and geometries of some of the best preserved examples of Lower Cretaceous tidal flat facies within the Tethyan epeiric platform. Field, petrographic and geochemical data were acquired from the Barremian–Aptian Jurf and Qishn formations that crop out in a 500 × 1000 m² butte, thus allowing for pseudo three‐dimensional quantitative data acquisition of the dimensions and spatial distributions of discontinuity surfaces and sedimentary bodies. The interpretation presented here suggests that the main processes impacting sedimentation in the Lower Cretaceous peritidal environment of the Haushi‐Huqf were transport and erosion processes related to storm waves and currents. The vertical evolution of the carbonate system is organized into six types of metre‐scale depositional sequences, from subtidal dominated sequences to supratidal‐capped sequences, which are bounded by regional discontinuity surfaces. At subaerial exposure and submarine erosion surfaces associated with a base level shift, sedimentary horizons along the entire depositional profile are cut by scours possibly created by storm events. Chemostratigraphy allows correlation between the Haushi‐Huqf and the age‐equivalent sections logged in the interior of the platform in Oman. The correlation suggests that the change from subtidal to intertidal depositional sequences during the late highstand is coeval with the development of rudist dominated shoals on the shelf. This study is the first to discuss the controls on Lower Cretaceous peritidal carbonate cyclicity of the Arabian epeiric platform. The results presented here also offer a unique quantitative dataset of the distribution and dimensions of peritidal carbonate shoals and storm scours in a regional sequence stratigraphic context.     

Carbonate platform development in a Paleoproterozoic extensional basin,Vempalle Formation,Cuddapah Basin,India

Sedimentological investigation of the late Paleoproterozoic (Orosirian) Vempalle Formation of the Cuddapah Basin, Dharwar craton, India, reveals three facies association that range from supratidal to deep subtidal. Sedimentary rocks of this succession are dominated by heterolithic carbonate mudstone, intraformational carbonate conglomerate, and a variety of columnar, domal, and stratiform microbialite facies. Deposition occurred in an extensional regime during development of a low-gradient ramp, where the distribution of microbialite facies is distinctly depth-partitioned. A gradual increase in synoptic relief of columnar stromatolites through the section, and the upward transition from stratiform to columnar microbialites, record a prolonged marine transgression with little or no influx of terrigenous detritus. Siliciclastic influx along the northeastern side of the shelf reflects the redistribution of topographic highs concomitant with large scale volcanic activity. Redistribution of topographic highs eventually led to progradation of peritidal facies and shutting down of the carbonate factory. Earthquake-induced ground shaking and voluminous volcanism experienced by this platform point to the reactivation of a deep-seated mantle-plume that resulted in thermal doming of the Dharwar crust prior to the onset of Cuddapah deposition. Isotopic and elemental chemistry of a selection of Vempalle Formation carbonate rocks record elevated Mn²⁺ and Fe²⁺ concentrations and depleted carbon isotope values in inner ramp lagoonal facies, relative to more open marine stromatolitic facies. Patterns of isotopic and elemental variation suggest the presence of geochemically distinct water masses—either within the water column or within substrate pore fluids—that resulted from a combination of globally low marine oxygenation and restricted oceanographic circulation in inner ramp environments. These data suggest that, even in the aftermath of Early Paleoproterozoic oxygenation, that ocean chemistry was heterogeneous and strongly affected by local basin conditions.     

Lower Carboniferous peritidal carbonates and associated evaporites adjacent to the Leinster Massif,southeast Irish Midlands

Analysis of a 275 m‐thick section in the Milford Borehole, GSI‐91‐25, from County Carlow, Ireland, has revealed an unusual sequence of shallow subtidal, peritidal and sabkha facies in rocks of mid?‐late Chadian to late Holkerian (Viséan, Lower Carboniferous) age. Sedimentation occurred on an inner ramp setting, adjacent to the Leinster Massif. The lower part of the sequence (late Chadian age) above the basal subtidal bioclastic unit is dominated by oolite sand facies associations. These include a lower regressive dolomitized, oolitic peloidal mobile shoal, and an upper, probably transgressive, backshoal oolite sand. A 68 m‐thick, well‐developed peritidal sequence is present between the oolitic intervals. These rocks consist of alternating stromatolitic fenestral mudstone, dolomite and organic shale, with evaporite pseudomorphs and subaerial exposure horizons containing pedogenic features. In the succeeding Arundian–Holkerian strata, transgressive–regressive carbonate units are recognized. These comprise high‐energy, backshoal subtidal cycles of argillaceous skeletal packstones, bioclastic grainstones with minor oolites and algal wackestones to grainstones and infrequent algal stromatolite horizons. The study recognizes for the first time the peritidal and sabkha deposits in Chadian rocks adjacent to the Leinster Massif in the eastern Irish Midlands. These strata appear to be coeval with similar evaporite‐bearing rocks in County Wexford that are developed on the southern margin of this landmass, and similar depositional facies exist further to the east in the South Wales Platform, south of St. George's Land, and in Belgium, south of the Brabant Massif. The presence of evaporites in the peritidal facies suggests that dense brines may have formed adjacent to the Leinster Massif. These fluids may have been involved in regional dolomitization of Chadian and possibly underlying Courceyan strata. They may also have been a source of high salinity fluids associated with nearby base‐metal sulphide deposits. Copyright © 2005 John Wiley & Sons, Ltd.     

Neoproterozoic Molar-tooth Structure and Constraint of Depositional Facies and Environment in the North China Platform in Jiangsu, Anhui and Liaoning, Eastern China

Molar tooth structure （MTS） represented by complex ptygmatical shapes is widely distributed in the Proterozoic of the world. MTS filled by fine, equant sparry calcite （or dolomite） displays an abrupt contact with hosting rocks, which are mainly composed of carbonaceous micrites and fine-grained carbonates with local silts and stormdominated deposits with graded, cross or wave beddings, numerous erosional surfaces and truncated and fills or guttered bases. Occurrence of MTS suggests a result of the constraint of sedimentary facies, and the storm-base in ramp settings is the maximum depth for the formation of MTS. Vertical succession of MTS-bearing carbonates shows a deposition stacked by high-frequency shallow subtidal and peritidal cycles. An individual cyclic MTS-bearing sequence is characterized by thinning, shallowing and dynamic decreasing-upward, and peritidal caps of purple red iron and organic carbonaceous sediments with more complicated shapes of MTS are common on the top of individual MTS-bearing sequences.     

Progradational Holocene carbonate tidal flats of Crooked Island,south‐east Bahamas: An alternative to the humid channelled belt model

The stratigraphic record of many cratonic carbonate sequences includes thick successions of stacked peritidal deposits. Representing accumulation at or near sea‐level, these deposits have provided insights into past palaeoenvironments, sea‐level and climate change. To expand understanding of carbonate peritidal systems, this study describes the geomorphology, sedimentology and stratigraphy of the tidal flats on the Crooked‐Acklins Platform, south‐east Bahamas. The Crooked Island tidal flats extend continuously for ca 18 km on the platformward flank of Crooked Island, reaching up to 2 km across. Tidal flats include four environmental zones with specific faunal and floral associations and depositional characteristics: (i) supratidal (continuous supratidal crust and pavement); (ii) upper intertidal, with the mangrove Avicennia germinans and the cyanobacteria Scytonema; (iii) lower intertidal (with the mangrove Rhizophora mangal) and (iv) non‐vegetated, heavily burrowed subtidal (submarine). These zones have gradational boundaries but follow shore‐parallel belts. Coring reveals that the thickness of this mud‐dominated sediment package generally is <2 m, with depth to Pleistocene bedrock gradually shallowing landward. The facies succession under much of the tidal flat includes a basal compacted, organic‐rich skeletal‐lithoclast lag above the bedrock contact (suggesting initial flooding). This unit grades upward into rhizoturbated skeletal sandy mud (subtidal) overlain by coarsening‐upward peloid‐foraminifera‐gastropod muddy sand (reflecting shallowing to intertidal elevations). Cores from landward positions include stacked thin indurated layers with autoclastic breccia, root tubules and fenestrae (interpreted as supratidal conditions). Collectively, the data reveal an offlapping pattern on this prograding low‐energy shoreline, and these Holocene tidal flats may represent an actualistic analogue for ancient humid progradational tidal flats. Nonetheless, their vertical facies succession is akin to that present beneath channelled belt examples, suggesting that facies successions alone may not provide unambiguous criteria for prediction of the palaeogeomorphology, lateral facies changes and heterogeneity in stratigraphic analogues.     

Allogenic and autogenic controls on facies and stratigraphic architecture of the Lower Jurassic Mashabba Formation,Gebel Al-Maghara,North Sinai,Egypt

The Lower Jurassic Mashabba Formation crops out in the core of the doubly plunging Al-Maghara anticline, North Sinai, Egypt. It represents a marine to terrestrial succession deposited within a rift basin associated with the opening of the Neotethys. Despite being one of the best and the only exposed Lower Jurassic strata in Egypt, its sedimentological and sequence stratigraphic framework has not been addressed yet. The formation is subdivided informally into a lower and upper member with different depositional settings and sequence stratigraphic framework. The sedimentary facies of the lower member include shallow-marine, fluvial, tidal flat and incised valley fill deposits. In contrast, the upper member consists of strata with limited lateral extension including fossiliferous lagoonal limestones alternating with burrowed deltaic sandstones. The lower member contains three incomplete sequences (SQ1-SQ3). The depositional framework shows transgressive middle shoreface to offshore transition deposits sharply overlain by forced regressive upper shoreface sandstones (SQ1), lowstand fluvial to transgressive tidal flat and shallow subtidal sandy limestones (SQ2), and lowstand to transgressive incised valley fills and shallow subtidal sandy limestones (SQ3). In contrast, the upper member consists of eight coarsening-up depositional cycles bounded by marine flooding surfaces. The cycles are classified as carbonate-dominated, siliciclastic-dominated, and mixed siliciclastic-carbonate. The strata record rapid changes in accommodation space. The unpredictable facies stacking pattern, the remarkable rapid facies changes, and chaotic stratigraphic architecture suggest an interplay between allogenic and autogenic processes. Particularly syndepositional tectonic pulses and occasional eustatic sea-level changes controlled the rate and trends of accommodation space, the shoreline morphology, the amount and direction of siliciclastic sediment input and rapid switching and abandonment of delta systems.     

中元古界非叠层石灰岩中的MISS:以北京延庆千沟剖面高于庄组第三段为例

前寒武纪碳酸盐岩多以叠层石碳酸盐岩序列为特征。燕山地区中元古界高于庄组,其中的第三段(张家裕亚组)则为一个以灰岩为主、贫乏叠层石的碳酸盐岩沉积序列,该序列被定义为前寒武纪非叠层石碳酸盐岩序列。该非叠层石碳酸盐岩沉积序列,尤其以燕山西部的延庆千沟剖面最为典型。根据沉积相序列及其所反映的旋回性,可以将该剖面的高于庄组第三段划分为3个三级层序。在这些三级层序的海侵体系域和早期高水位体系域中,中薄层隐晶质泥晶灰岩(均一石灰岩)和灰黑色薄层泥灰岩组成若干潮下型米级旋回;而在隐晶质泥晶灰岩层面上,普遍发育各种奇形怪状的沉积构造。这些沉积构造包括穹窿状构造、规则网状和杂乱的帐篷脊、变余波痕等,构成一个潮下相灰岩层面上的特别的微生物形成的沉积构造(Microbial Induced Sedimentary Structure,MISS)组合。因此,延庆千沟剖面的高于庄组第三段,特别的岩石类型和沉积构造成为前寒武纪碳酸盐岩沉积中非叠层石碳酸盐岩沉积序列的典型代表,尤其是那些奇形怪状的MISS所代表的沉积学特点表明:在前寒武纪,即使在叠层石生长的黄金时段,也发育非叠层石碳酸盐岩沉积序列。因此,这些现象将特别有助于对前寒武纪非叠层石生态系所造成的另一类席底生境的深入理解,也有助于复杂多变的碳酸盐岩世界。     

Porosity distribution in cyclic dolomites of the Lower Qiulitag Group (Upper Cambrian) in northwestern Tarim Basin,China

Increasing interests in hydrocarbon resources at depths have drawn greater attentions to the deeply-buried carbonate reservoirs in the Tarim Basin in China. In this study, the cyclic dolomite rocks of Upper Cambrian Lower Qiulitag Group from four outcrop sections in northwestern Tarim Basin were selected to investigate and evaluate the petrophysical properties in relation to depositional facies and cyclicity. The Lower Qiulitag Group includes ten lithofacies, which were deposited in intermediate to shallow subtidal, restricted shallow subtidal, intertidal, and supratidal environments on a carbonate ramp system. These lithofacies are vertically stacked into repeated shallowing-upward, meter-scale cycles which are further grouped into six third-order depositional sequences (Sq1 to Sq6). There are variable types of pore spaces in the Lower Qiulitag Group dolomite rocks, including interparticle, intraparticle, and fenestral pores of primary origin, inter crystal, and vuggy pores of late diagenetic modification. The porosity in the dolomites is generally facies-selective as that the microbially-originated thrombolites and stromatolites generally yield a relatively high porosity. In contrast, the high-energy ooidal grainstones generally have very low porosity. In this case, the microbialite-based peritidal cycles and peritidal cycle-dominated highstand (or regressive) successions have relatively high volumes of pore spaces, although highly fluctuating (or vertical inhomogeneous). Accordingly, the grainstone-based subtidal cycles and subtidal cycle-dominated transgressive successions generally yield extremely low porosity. This scenario indicates that porosity development and preservation in the thick dolomite successions are primarily controlled by depositional facies which were influenced by sea-level fluctuations of different orders and later diagenetic overprinting.