滇西茅草坪脉状铜矿床电气石的发育特征、成分及其意义

位于滇西兰坪盆地西缘的茅草坪矿床是近年来新发现的一个脉状铜矿床,与该区其他脉状铜矿不同,它发育大量热液电气石。本文对矿床电气石的发育特征和化学成分进行了研究,以此探讨电气石生长和成分的控制因素、成矿流体来源及成矿过程中氧逸度的变化。茅草坪矿床铜矿体由石英-碳酸盐-硫化物脉及伴生的热液蚀变晕组成。电气石可分为两类:较早沉淀的蚀变晕电气石(T1)和较晚沉淀的脉体内电气石(T2)。T1电气石与石英共生,出现在变碎屑岩(T1-Q)和大理岩(T1-M)中,矿物强烈定向生长,长轴平行于围岩的剪切面理,颗粒相对细小,此阶段无含铜硫化物生成;T2电气石伴有黄铜矿生成,矿物长轴多与围岩的剪切面理斜交、呈弱定向生长,或不定向地生长,矿物颗粒相对粗大。由此反映在矿床热液矿化过程中,控制热液矿物生长的构造应力由强剪切到弱剪切及剪切停止的趋势变化。电子探针分析结果表明,所有电气石均属于碱性族,主体为镁电气石。T2电气石在背散射图像下存在明暗环带,与Ti、Fe、Mg含量的差异有关,也反映该期成矿流体的物理化学条件呈波动变化。茅草坪电气石的化学组成主要受流体成分控制,但T1-Q电气石相对富Al,T1-M电气石相对富Ca,表明围岩对蚀变晕电气石成分有一定影响。矿床以镁电气石为主的特征,暗示成矿流体不可能直接来自未经历水-岩相互作用的壳源花岗岩岩浆水。T2电气石较T1电气石具有高的Fe~(3+)/(Fe~(3+)+Fe~(2+))值,表明矿床成矿流体从早期到晚期可能是一个氧逸度升高的过程。结合区域脉状铜矿流体特征、金属组合、围岩和蚀变特征,推测茅草坪矿床及滇西脉状铜矿床迁移Cu的流体可能是CO_2缓冲p H值的还原性流体,在矿化部位流体氧逸度升高很可能是含铜硫化物沉淀的重要机制之一。     

滇西马厂箐钼铜金矿床中赋矿斑状花岗岩定年及其地质意义

马厂箐钼铜金多金属矿床是滇西地区金沙江-哀牢山构造带内与新生代富碱斑岩有关的典型矿床之一。根据赋矿斑状花岗岩中锆石的阴极发光图像、LA-ICP-MS微量元素分析和U-Pb定年以及辉钼矿Re-Os法测年研究等,结合前人研究成果,应用透岩浆流体成矿理论,进一步讨论了马厂箐矿床的成因机制。研究表明：该矿床的多金属成矿与赋矿斑状花岗岩的成岩基本同时,其成岩成矿过程统一受制于与该区大规模活动的新生代富碱岩浆和深部地壳重熔的花岗质岩浆同步运移的成矿流体作用。这种成矿流体是包含于岩浆并与其互不混溶的含矿地幔流体。但在上侵运移过程中,伴随岩浆的成岩作用,流体与岩浆发生不同程度分离,表现为：产于富碱斑状花岗岩体内,形成正岩浆成矿的斑岩型钼矿;产于岩体与围岩接触带,形成接触交代成矿的矽卡岩型铜（钼）矿;产于地层围岩中则形成构造破碎蚀变岩型金矿。在这一成岩成矿过程中,地幔流体可以运载和沿途活化成矿物质至适宜容矿部位集中,并随其对地壳岩石的交代蚀变以及深度和环境变化引起的物理化学条件变化,其流体属性由熔浆流体→超临界流体→热液流体转化,促使壳幔物质相互作用而叠加成矿,导致在不同部位形成不同矿种和不同类型的系列成矿效应。     

川西甲基卡308号脉的矿物学特征及其岩浆- 热液演化示踪

甲基卡稀有金属矿床是亚洲规模最大的伟晶岩型锂矿床，308号脉为其中出露面积最大的伟晶岩脉。308号脉具有完善的分带性:细粒白云母- 钠长石- 石英带（Ⅰ）、中粗粒钠长石- 石英- 微斜长石带（Ⅱ）、中粒电气石- 钠长石- 石英带（Ⅲ）、中粗粒锂辉石- 钠长石- 石英带（Ⅳ）和中细粒锂辉石- 钠长石- 石英带（Ⅴ），并且富含稀有金属矿物（如锂辉石、绿柱石、锡石和铌钽氧化物），因此是系统研究伟晶岩演化历史和成岩成矿机制的理想实验对象。308号脉的矿物学研究较为薄弱，其岩浆- 热液演化过程及该过程中熔- 流体性质的变化规律，以及稀有金属的富集过程和影响因素尚不清楚。本文选取该脉各结构带中的贯通性矿物云母、磷灰石，以及稀有金属矿物锂辉石和特征性矿物电气石，通过详细的电子探针工作，分析它们的产状、结构特征、化学组成及其变化，结果表明:① 308号脉边部Ⅰ带（高温结晶）中电气石的出现（~5%）反映伟晶岩初始熔体具有富B的特征（>2%）；锂辉石在Ⅳ和Ⅴ带内的大量结晶说明初始熔体可能具有富Li的性质；主要含氟矿物电气石、磷灰石和云母类在岩石中的含量均较低，并且原生磷灰石具有相对偏低的F浓度（<3%），仅能形成于富F环境中的锂云母矿物也十分稀少，这些特征均表明308号脉初始熔体很可能具有较低的F含量；② 伟晶岩体系演化至Ⅴ带时发生流体出溶现象，自此进入岩浆- 热液过渡阶段，出溶流体可能具有富Cs和贫F的性质；③ 原生白云母和电气石化学成分的规律性变化说明308号脉的演化过程很可能不存在外来流体的加入；④ 308号伟晶岩的成岩和锂成矿过程主要受分异结晶作用支配，有限的出溶流体规模和伟晶岩分异演化程度（仅演化至岩浆- 热液过渡阶段，未充分进入热液阶段）对锂辉石的结晶和保存都起到了重要作用。     

德兴斑岩铜矿成矿过程的氧、锶、钕同位素证据

为探讨德兴铜厂斑岩铜矿床成矿热液流体的来源、作用范围、时空演化及Cu在热液流体中的行为和迁移方向等重要问题，对采集于该矿床南部不同蚀变程度的岩石进行了氧、锶、钕同位素分析，结果表明，虽然与铜三斑岩铜矿成矿过程有关的热液流体至少有3种，包括高温岩浆流体、来自深部围岩的非岩浆流体和大气降水，但是起主导作用的是岩浆流体，钕、锶同位素在空间上的变化表明，在成矿流体形成及演化过程中，锶同位素值由斑岩体内部向围岩接触带有规律地升高（0.705→0.711），指示了矿床是因热液流体将成矿元素从岩体内部迁移到接触带附近富集而成的，它符合斑岩铜矿的正岩浆模式，而钕同位素则相对稳定，可作为蚀变侵入体岩浆起源的示踪剂。     

山西省中条山铜矿田电气石与电气石岩的研究

本文通过对中条山铜矿田电气石和电气石岩地质产状、岩相学和矿物学、矿物化学等特征的研究，指出本区有三种成因类型的电气石：（１）北峪酸性侵入体岩浆期后热液成因电气石；（２）中条群地层中变质热液形成的电气石；（３）赋矿岩石和近矿围岩中热液蚀变电气石。第（３）类电气石具有特征的产状、矿物化学和矿物共生组合标型，是重要的找矿标志     

黑龙江金厂金矿床地质特征及成因探讨

通过对矿体围岩花岗闪长岩，花岗斑岩类和隐爆角砾岩筒控矿－容矿构造及矿石组分的研究，将金厂矿床金矿化类型分为破碎蚀变岩型，裂隙充填型和角砾岩型；对矿物学和同位素地球化学的研究结果表明，成矿物质主要来源于深部（岩浆源），在成矿作用早期阶段成矿流体主要为岩浆水，晚期阶段有部分大气水的加入，金厂金矿床是中生代火山－次火山活动的产物，矿床属浅成温岩浆期后热液型金矿床。     

中国还原性斑岩矿床研究进展及判别标志

世界上大多数斑岩矿床的成矿流体为氧化流体(CO_2 CH_4)。然而,Rowins(2000)提出一些斑岩Cu-Au矿床的成矿流体为富含CH_4的还原流体,矿床缺乏磁铁矿、赤铁矿和硬石膏等表征高氧逸度的矿物,而发育大量的磁黄铁矿,矿床规模小,矿床形成与含钛铁矿的还原性的Ⅰ型花岗岩类有关,并将其称之为还原性斑岩Cu-Au矿床。我国学者研究发现,中国不但发育还原性斑岩铜矿床,还发育还原性斑岩-矽卡岩铜矿床和还原性斑岩钼矿床,我们建议将这三种矿床统称为还原性斑岩矿床。本文基于课题组近十年来的研究工作,并结合前人的研究成果,综合分析了中国发育的大中型还原性斑岩矿床的典型实例,在此基础上,重点阐明中国大型还原性斑岩矿床的特点、流体中CH_4来源及其有关的成矿作用、容矿围岩特点、成矿岩浆氧化还原状态及其成因、矿床形成的构造背景等。与Rowins(2000)提出的还原性斑岩铜矿床规模小的特点不同,中国发育的一些还原性斑岩矿床规模大;我们研究还识别出该类矿床发育独特的热液矿物和矿石矿物,比如,还原性斑岩铜矿发育热液钛铁矿,矿石矿物以黄铜矿为主,罕见斑铜矿、辉铜矿等矿物;还原性斑岩钼矿床出现热液钛铁矿,矿石矿物以辉钼矿为主,罕见黑钨矿和锡石等矿物;还原性斑岩-矽卡岩铜矿床的矽卡岩期发育钙铝榴石、钙铁辉石等还原性矽卡岩矿物和大量的磁黄铁矿,热液期以发育黄铜矿而非斑铜矿和辉铜矿等矿石矿物为特征。因此,还原性斑岩矿床除了Rowins(2000)提出的发育富CH_4还原流体和磁黄铁矿等识别标志之外,还可辅以独特的脉石矿物(如钛铁矿、钙铝榴石、钙铁辉石等)和简单的矿石矿物(如黄铜矿、辉钼矿等)这两个标志进行识别。中国还原性斑岩矿床含矿岩体的围岩中普遍发育还原性岩石(如含碳质沉积岩或火山沉积岩、含亚铁的火山岩或火山沉积岩等);对于成矿流体中CH_4、C_2H_6等还原性气体的来源,多数学者认为CH_4、C_2H_6等还原性气体主要源于还原性围岩,部分源于岩浆。关于还原性斑岩矿床的成矿岩体是否为含钛铁矿的、还原性的花岗岩类,目前研究较少且存在争议,多数学者认为成矿原始岩浆为氧化性岩浆,但其氧逸度偏低,少数学者认为成矿岩浆始终为还原岩浆。还原性斑岩矿床与经典的斑岩矿床的成矿构造背景类似,二者没有明显区别。还原性斑岩矿床显示的还原性热液蚀变和成矿特点均与成矿流体富含CH_4还原气体密切相关,因此,富含CH_4还原流体是还原性斑岩矿床形成的关键。     

云南会泽铅锌矿床脉石矿物方解石REE地球化学

方解石是云南会泽铅锌矿床最重要的脉石矿物，原生矿石中三种产状（即团块状状、团斑状和脉状）方解石的REE含量、有关参数和配分模式都有一定的差异，但不同产状方解石之间以及同种产状方解石的REE地球化学特征具有连续变化规律。分析结果表明：矿区原生矿石中三种产状方解石为同源不同阶段形成的产物；矿床成矿流体具有多来源特征，地幔流体在成矿流体形成过程中具有重要作用；成矿流体在演化过程REE含量逐渐降低；成矿环境由相对还原向相对氧化变化。     

江西德兴铜厂斑岩铜矿成矿物质来源的再认识——来自流体包裹体的证据

本文从江西德兴斑岩铜矿铜厂矿床的流体包裹体研究出发,讨论了矿床成矿物质来源与矿床成因。矿床中流体包裹体分为6类,即富液包裹体、富气包裹体、含石盐多相包裹体、含CO2多相包裹体以及熔体包裹体和熔体-流体包裹体。富气包裹体、含石盐多相包裹体和熔体与熔体-流体包裹体代表了成矿早期岩浆热液的特征。在这些包裹体中发现黄铜矿等金属矿物,表明成矿金属主要源自岩浆。含石盐多相包裹体和富气包裹体与矿体关系不甚密切,但其中所含有的金属矿物特别是黄铜矿,暗示早期来自岩浆的热液流体金属含量较高,形成于大气降水与岩浆热液混合之前。成矿中晚期大气降水流体在冷却和稀释岩浆流体方面对于矿床的形成作出了一定贡献,但是来自围岩的大气降水可能并没有向成矿体系提供大量金属。     

广西大厂地区黑云母花岗岩中电气石的化学组成及其对岩浆热液演化的指示

广西大厂地区笼箱盖黑云母花岗岩与区内晚白垩世锡多金属成矿作用在时空上密切相关。岩相学特征表明,笼箱盖黑云母花岗岩中的电气石可以分为三类:1)浸染状电气石; 2)石英-电气石囊; 3)电气石-石英脉。本文利用电子探针和激光剥蚀等离子体质谱系统测定三种不同产状电气石的化学组成。分析结果显示,三种产状的电气石均具有高的Fe/(Fe+Mg)和Na/(Na+Ca)比值,主体属于碱基亚类铁电气石。浸染状电气石为岩浆晚期结晶,其Fe/(Fe+Mg)比值变化于0. 85～0. 94,随着岩浆分异,电气石逐渐富集Li、F、Fe和Sn等元素。与浸染状电气石相比,石英-电气石囊中早阶段电气石具有低的Fe/(Fe+Mg)比值,高的V、Co和Sr含量,可能反映了岩浆演化晚期出现的不混溶富硼熔/流体对早期黑云母和长石的交代作用,从而使囊中早阶段电气石继承部分被交代矿物的化学组成特征;石英-电气石囊中晚阶段电气石的化学组成变化较大(如Li、F、Mg、Al、V、Fe和Zn),与热液成因电气石的推论一致。与浸染状和囊状电气石相比,石英脉中的电气石具有高的Fe/(Fe+Mg)和Na/(Na+Ca)比值;微量元素组成与囊状电气石相似。就成矿元素锡而言,三种产状的电气石均具有相对高的锡含量,与其他地区锡成矿花岗岩中电气石的成分特征相似。但是,从岩浆晚期到热液阶段,大厂地区电气石的锡含量并没有显著升高,可能反映了早期岩浆热液流体对熔体锡有限的萃取作用。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。