The structural styles and formation mechanism of salt structures in the Southern Precaspian Basin: Insights from seismic data and analog modeling

Using the seismic profiles and analog modeling, this paper addresses the salt structures in the M and B blocks in the Southern Precaspian Basin. The salt structural features, the formation mechanism and the controlling factors of structural deformation are investigated and discussed systematically. The interpretation of the seismic profiles shows that typical salt-related structures include salt wall, (flip-flop) salt diapir, salt roller, salt pillow (dome), salt weld, salt withdrawal minibasin and drag structure (or drape fold). In addition, model results demonstrate that the gravity spreading driven by progradation and aggradation is probably the primary factor in controlling the formation of the salt structures in the research area. Due to the differential loading driven by progradation, passive salt diapir developed near the progradational front followed by the formation of intrasalt withdrawal minibasin bounded by two salt diapirs, and secondary reactive triangle salt diapir or salt pillow might form within the intrasalt withdrawal minibasin. Model results also indicate that the pattern of the subsalt basement has important influence on the formation and evolution of salt structures. Salt diapirs primarily developed along the margin of the subsalt uplift basement, where high shear deformation was induced by differential sedimentary loading between the uplift area and the slope area.     

Geological evolution and hydrocarbon potential of the salt-cored Hoodoo Dome,Sverdrup Basin,Arctic Canada

The evaporite-cored Hoodoo Dome on southern Ellef Ringnes Island, Sverdrup Basin, was examined to improve the understanding of its structural geological history in relation to hydrocarbon migration. Data from geological mapping, reflection seismic, thermal maturity and detrital apatite (U–Th)/He cooling ages are presented. Five stages of diapirism are interpreted from Jurassic to Recent times:1. 180 to 163 Ma (pre-Deer Bay Formation; development of a diapir with a circular map pattern).2. 163 to 133 Ma (Deer Bay to lower Isachsen formations; development of salt wings).3. 115 to 94 Ma (Christopher and Hassel formations; ongoing diapirism and development of an oval map pattern)4. 79 Ma (Kanguk Formation; reactivation of the central diapir).5. 42 Ma to 65 Ma (Eurekan Orogeny; tightening of the anticline).During phase1, the Hoodoo diapir was circular. During phase 2, salt wings formed along its margin. During phase 3, the Hoodoo Dome geometry evolved into a much larger, elongate, doubly plunging anticline. Phase 4 is inferred from thermochronology data as indicated by a cluster of cooling ages, but the extent of motion during that time is unknown. During Phase 5 the dome was tightened creating approximately 700 m of structural relief. Denudation since the end of the Eurekan Orogeny is estimated to be about 600 m.A one dimensional burial history model predicts hydrocarbon generation from Middle and Late Triassic source rocks between 140 and 66 Ma, with majority of hydrocarbon expulsion between 117 and 79 Ma. Hydrocarbon generation post-dates salt wing formation, so that this trap could host natural gas expelled from Triassic source rocks.     

Extensional rise and fall of a salt diapir in the Sørvestsnaget Basin,SW Barents Sea

Regional extension which initiates and promotes the rise of salt diapirs can also make diapirs fall once the supply of salt from its source is restricted. New observations on the 3D seismic data from a salt diapir in the Sørvestsnaget Basin suggest that salt moves until the end of the Eocene and is subtle to minor readjustments afterwards, revealing a more complex kinematics that previously described. Observations such as salt horns and sags and an antithetic fault linked to the western flank of the diapir suggest that salt syn-kinematics during Middle-Late Eocene included passive rising of the salt, followed by a fall. The salt horns are remnants of a taller salt diapir that, together with the indentation of the Middle-Late Eocene syn-kinematic sediment overburden above the salt, indicate diapiric fall due to restriction of salt supply by extension. Post-kinematic readjustments did not include diapiric reactivation by tectonic compression as previously thought, but minor salt rise by shortening due to gravity gliding after the tilting of the margin during Plio-Pleistocene glacial sediment loading and differential compaction of surrounding sediments. The salt diapir appears to be presently inactive and salt supply may have been restricted from its source already since Late Eocene.     

Salt tectonics in the Cap Boujdour Area,Aaiun Basin,NW Africa

Seismic reflection data indicate the Moroccan salt basin extends to the Cap Boujdour area in the Aaiun Basin. Two salt diapir structures have been identified and several areas of collapsed strata indicate probable salt removal at the shelf edge. The presence of salt in this area correlates to the conjugate southern George's Bank Basin and the Baltimore Canyon area, and it is suggested that the salt extends southward from the known salt diapir province in the George's Bank Basin southward to the Great Stone Dome. The paucity of salt diapirs is attributed to the thick carbonate and anhydrite sequence, which was deposited soon after salt deposition that inhibited halokinesis. The presence of salt along this large segment of the Atlantic margin should increase its hydrocarbon potential with traps created around salt diapirs and provision of migration pathways from deep potential source rocks in the early Cretaceous and Jurassic strata to shallower levels.     

Isochores and 3-D visualization of rising and falling slat diapirs

Diapir fall, which was predicted by physical models, has been identified in salt provinces, such as the South Atlantic margins, the North Sea, and the Paradox Basin (Colorado–Utah). However the 3-D geometry of falling diapirs and their country rock is still poorly understood. 3-D visualization and isochore patterns from a physical model help elucidate this geometry.The model initially comprised a unit of viscous silicone overlain by a prekinematic sand unit. Sand units representing brittle sediments were deposited episodically during gravity gliding and spreading. Regional extension triggered and eventually widened salt walls, causing them to sag. The 3-D visualization shows that regional hydrocarbon migration, which tends to be seaward during diapir rise and landward during diapir fall, can potentially be orthogonal to local migration along grabens at soft-linked zones of relay ramps. Furthermore, anticlinal culminations may form (1) in horsts that bend along strike and (2) adjoining the fork of Y-shaped salt walls.Sequential isochore maps of the overburden show how patterns of sedimentation, deformation, and underlying salt thickness changed through time. Isochores of prekinematic units record only strain: thinned belts record early extension. In contrast, isochores of synkinematic units record mostly thickness variations due to deposition on actively deforming topography. Isochores above sagging diapirs identify the thickest part of crestal depocenters, where the most rapid sagging occurred in regions of maximum extension near the unbuttressed downdip part of the gravity-spreading system. Additionally, asymmetric isochore patterns may reveal underlying half-grabens or tilted symmetric grabens. In relay systems, overlying isochores may indicate which part of a salt wall rose to compensate for sagging elsewhere in the relay.     

Style and timing of salt tectonics in the Dniepr-Donets Basin (Ukraine): implications for triggering and driving mechanisms of salt movement in sedimentary basins

The Ukrainian Dniepr-Donets Basin (DDB) is a Late Palaeozoic intracratonic rift basin, with sedimentary thicknesses up to 19 km, displaying the effects of salt tectonics during its entire history of formation, from Late Devonian rifting to the Tertiary. Hundreds of concordant and discordant salt structures formed during this time. It is demonstrated in this paper that the variety of styles of salt structure formation in the DDB provide important constraints on understanding the triggering and driving mechanisms of salt kinematics in sedimentary basins in general. Salt movement in the DDB began during the Devonian syn-rift phase of basin development and exerted controls on the later distribution of salt structures though the geometry of basement faults is not directly responsible for the regular spacing of salt structures. Post-rift salt movements in the DDB occurred episodically. Episodes of salt movement were triggered by tectonic events, specifically two extensional events during the Carboniferous, an extensional reactivation at the end of Carboniferous–earliest Permian, and a compressional event at the end of the Cretaceous. Extensional events that induced salt movement were ‘thick-skinned’ (i.e. basement involved in deformation) rather than ‘thin-skinned’. Most overburden deformation related to salt movements is ductile regardless of sedimentary bulk lithology and degree of diagenesis, while the deformation of sedimentary cover in areas where salt is absent is mainly brittle. This implies that the presence of salt changes the predominant mode of deformation of overlying sedimentary rocks. Episodes of salt movement lasted longer than the periods of active tectonics that initiated them. Buoyancy, erosion, and differential loading all played a role in driving halokinesis once tectonic forces had pushed the salt-overburden system into disequilibrium; among these factors, erosion of overburden above growing salt structures acted as a key self-renewing force for development of salt diapirs. Very high sedimentation rates (related to high post-rift tectonic subsidence rates), particularly during the Carboniferous, were able to bury diapirs and to load salt bodies such that buoyancy, erosion, and differential loading forces eventually became insufficient to continue driving diapirism—until the system was perturbed by an ensuing tectonic event. In contrast, some salt anticlines and diapirs developed continuously during the entire Mesozoic because of much-reduced tectonic subsidence rates (and sedimentation supply) during this time. However, a Lower Permian salt series and overhangs of buried diapirs played an important role in preventing overburden piercing (and fracturing) during the Mesozoic and, specifically, during the Late Cretaceous salt diapirism phase.     

Structural and facies architecture of a diapir-related carbonate minibasin (lower and middle Jurassic,High Atlas,Morocco)

We report the structural geometry and facies architecture of a small diapir-related carbonate-dominated basin from the Jurassic rift of the Moroccan High Atlas. The Azag minibasin is a lozenge-shaped depocenter completely enclosed by tectonic boundaries that we interpret as welds after former salt anticlines or salt walls. The exposed ca. 3000 m-thick infill of the Azag minibasin is asymmetric; layers are tilted to the W defining a rollover geometry. Areally-restricted sedimentary discontinuities and wedges of growth strata near the basin margins indicate sedimentation contemporaneous with diapiric rise of a Triassic ductile layer. Facies evolution through the basin reflects local accommodation by salt withdrawal and regional events in the High Atlas rift. The early basin infill in the Sinemurian and Pliensbachian shows thickness variations indicative of low-amplitude halokinetic movements, with reduced exposed thicknesses compared to surrounding areas. The exposed Toarcian and Aalenian deposits are also reduced in thickness compared to areas outside the basin. Subsidence increased dramatically in the Bajocian-early Bathonian (?), the main phase of downbuilding, when over 2600 m of carbonates and shales accumulated at a rate > 0.5 mm/a in the depocentral area of the minibasin governed by W-directed salt expulsion. The stratigraphic units distinguished often show maximum thicknesses and deeper facies in the depocentral area, and rapidly change to shallower facies at the basin margins. The Bajocian carbonate facies assemblage of the minibasin include: reservoir facies as microbialite-coral reefs in the basin margins (formed during periods of strong diapir inflation and bathymetric relief), basin-expansive oolite bars (formed during episodes of subdued relief), and organic-rich, dark lime mudstones and shales that show source-rock characteristics. The Azag basin is a good analog for the exploration of salt-related carbonate plays in rifts and continental margins where source-rock and reservoir can form in a same minibasin.     

The impact of syn- and post-extension prograding sedimentation on the development of salt-related rift basins and their inversion: Clues from analogue modelling

Various studies have demonstrated the intrinsic interrelationship between tectonics and sedimentation in salt-related rift basins during extension as well as during their inversion by compression. Here, we present seven brittle–ductile analogue models to show that the longitudinal or transverse progradation of sediment filling an elongate extensional basin has a substantial impact on the growth of diapirs and their lateral geometrical variations. We use five extensional models to reveal how these prograding systems triggered diapir growth variations, from proximal to distal areas, relative to the sedimentary source. In the models, continuous passive diapir walls developed, after a short period of reactive–active diapiric activity, during syn-extensional homogeneous deposition. In contrast, non-rectilinear diapir walls grew during longitudinal prograding sedimentation. Both longitudinal and transverse post-extensional progradation triggered well-developed passive diapirs in the proximal domains, whereas incipient reactive–active diapirs, incipient roller-like diapirs, or poorly developed diapirs were generated in the distal domains, depending on the modelled sedimentary pattern. Two models included final phases of 6% and 10% shortening associated with basin inversion by compression, respectively, to discriminate compressional from purely extensional geometries. With the applied shortening, the outward flanks of existing diapir walls steepened their dips from 8°–17° to 30°–50°. Likewise, 6% of shortening narrowed the diapir walls by 32%–72%, with their fully closing (salt welds) with 10% of shortening. We compare our results with the distribution of salt walls and minibasins of the Central High Atlas diapiric basin in Morocco, which was infilled with a longitudinally prograding mixed siliciclastic and carbonatic depositional sequence during the Early–Middle Jurassic with a minimum thicknesses of 2.5–4.0 km.     

Comparison of evolutionary and static modeling of stresses around a salt diapir

We compare an evolutionary with a static approach for modeling stress and deformation around a salt diapir; we show that the two approaches predict different stress histories and very different strains within adjacent wall rocks. Near the base of a rising salt diapir, significantly higher shear stresses develop when the evolutionary analysis is used. In addition, the static approach is not able to capture the decrease in the hoop stress caused by the circumferential diapir expansion, nor the increase in the horizontal stress caused by the rise of the diapir. Hence, only the evolutionary approach is able to predict a sudden decrease in the fracture gradient and identify areas of borehole instability near salt. Furthermore, the evolutionary model predicts strains an order of magnitude higher than the strains within the static model. More importantly, the evolutionary model shows significant shearing in the horizontal plane as a result of radial shortening accompanied by an almost-equivalent hoop extension. The evolutionary analysis is performed with ELFEN, and the static analysis with ABAQUS. We model the sediments using a poro-elastoplastic model. Overall, our results highlight the ability of forward evolutionary modeling to capture the stress history of mudrocks close to salt diapirs, which is essential for estimating the present strength and anisotropic characteristics of these sediments.     

Slumping and shallow faulting related to the presence of salt on the Continental Slope and Rise off North Carolina

Seismic reflection profiles and long- and medium-range sidescan sonar were used to investigate a salt diapir complex and area of slope instability near the base of the Continental Slope off North Carolina. Within the area of investigation three diapirs are bounded on their upslope side by a scarp 60 m high and 50 km long. The slope above the scarp is characterized by a series of shallow rotational normal faults. The bottom below the scarp is furrowed by slide tracks, which were probably carved by large blocks that broke off the scarp face and slid downslope leaving rubble and scree lobes.Extensive slumping in this area appears to be a result of uplift and faulting associated with salt intrusion, which has fractured and oversteepened the slope leading to instability and failure. Sharply defined slide tracks suggest that slope failure above the breached diapir complex is a continuing process, in contrast to much of the surrounding slope area where few instability features were observed.     

Impact of basin structure and evaporite distribution on salt tectonics in the Algarve Basin,Southwest Iberian margin

The SW Iberian margin developed as a passive margin during Mesozoic times and was later inverted during the mainly Cenozoic Alpine orogeny. The initial syn-rift deposits include a Lower Jurassic evaporite unit of variable thickness. In the onshore, this unit is observed to thicken basinward (i.e., southward), in fault-controlled depocenters, and salt-related structures are only present in areas of thick initial evaporites. In the offshore, multiple salt-structures cored by the Lower Jurassic evaporites are interpreted on seismic reflection data and from exploratory drilling. Offshore salt structures include the allochthonous Esperança Salt Nappe, which extends over an area roughly 40 × 60 km. The abundance of salt-related structures and their geometry is observed to be controlled by the distribution of evaporite facies, which is in turn controlled by the structure of rift-related faulting. This paper presents a comprehensive study of salt tectonics over the entire onshore and offshore SW Iberian passive margin (southern Portugal and Gulf of Cadiz), covering all aspects from initial evaporite composition and thickness to the evolution of salt-related structures through Mesozoic extension and Cenozoic basin inversion.     

Salt tectonics and Pliocene stratigraphic framework at MC-118, Gulf of Mexico: An integrated approach with application to deep-water confined structures in salt basins

Integrated tectono-stratigraphic interpretation at MC-118 using 3D seismic, well logs and biostratigraphy reveals an area dominated by allochthonous salt and its related structures. OCS-Block MC-118 is located 130 km southeast of New Orleans on the Gulf of Mexico middle slope in ∼2600 ft of water.The area is divided into three domains based on their structural styles: (1) a western domain consisting of a basinward-dipping normal fault family and associated strata; (2) a central domain composed of a landward-plunging diapiric salt tongue canopy and associated salt welds, two flanking NE–SW trending salt-withdrawal mini-basins, and a crestal fault family; and (3) an eastern domain comprised of basinward/landward-dipping normal and listric normal fault families with their associated rollovers. These structural domains are genetically-and-kinematically related to the salt structure and extend beyond MC-118 boundaries. The salt structure is postulated to have evolved mostly passive, with punctuated active episodes, and by lateral spreading. This is part of a larger regional structure, eastern Gulf of Mexico, which involves some amalgamation between small-scale salt canopies and salt diapirs although collectively they appear mostly disconnected.A Pliocene (3.13–4.95 Ma) third-order genetic stratigraphic sequence, the focus of this study, is as much as ∼3600 ft thick within the mini-basins and contains: muddy mass transport complexes; sandy slope fans; muddy turbidites and condensed sections; and transitional facies flanking the salt structure that collectively have ponded and wedged external geometries. Mass transport complexes and muddy turbidites and condensed sections make most of the studied genetic sequence in a mud-dominated deltaic setting eastern Gulf of Mexico.Facies kinematic indicators and a matching number of genetic sequences accounted on the sea level chart support a eustatically driven mini-basin sedimentation. Nonetheless salt still plays a role in sedimentation (secondary/minor) by slumping generated during passive/active salt diapiric evolution.     

Modeling stress evolution around a rising salt diapir

We model the evolution of a salt diapir during sedimentation and study how deposition and salt movement affect stresses close to the diapir. We model the salt as a solid visco-plastic material and the sediments as a poro-elastoplastic material, using a generalized Modified Cam Clay model. The salt flows because ongoing sedimentation increases the average density within the overburden sediments, pressurizing the salt. Stresses rotate near a salt diapir, such that the maximum principal stress is perpendicular to the contact with the salt. The minimum principal stress is in the circumferential direction, and drops near the salt. The mean stress increases near the upper parts of the diapir, leading to a porosity that is lower than predicted for uniaxial burial at the same depth. We built this axisymmetric model within the large-strain finite-element program Elfen. Our results highlight the fact that forward modeling can provide a detailed understanding of the stress history of mudrocks close to salt diapirs; such an understanding is critical for predicting stress, porosity, and pore pressure in salt systems.     

Structure and evolution of the Northeastern German Basin and its transition onto the Baltic Shield

The post-Permian sequence stratigraphical and structural evolution of the Northeastern German Basin and its transition onto the Baltic Shield has been studied in the Bay of Mecklenburg (SW Baltic Sea) by means of seismic interpretation. Five major sequences have been identified: Middle Triassic, Upper Triassic, Jurassic, Cretaceous and Cenozoic. Time–isochore maps allowed the identification of several phases of salt pillow growth. The contemporaneity of active salt tectonics and the well studied tectonic evolution of the Northeastern German Basin suggest a causative correlation. The E–W directed extension during the Triassic-Early Jurassic marking the beginning break-up of Pangaea is seen as the trigger process for the first period of salt movement. A fault system outside the limit of the Zechstein evaporates is understood as the consequence of thin-skinned faulting and brittle thick-skinned deformation that accompanied this extension. The observed pronounced erosion of Upper Triassic and Lower Jurassic strata is considered to result from the uplift due to the Mid North Sea Doming event in Middle Jurassic times. The seismic data show an undisturbed Late Cretaceous succession which reflects a period of rising sea level, tectonic quiescence and no salt movement. In contrast to the salt pillows which emerged above Triassic fault systems in the westernmost Baltic and western North German Basin, the Cenozoic salt movement activity is the most pronounced. This period of reactivated salt pillow growth started coevally with the onset of the Alpine orogeny at the Cretaceous/Cenozoic transition when the Africa-Arabian plate collided with Eurasia. Generally, no significant faults were identified in the overburden of the salt floored southern Bay of Mecklenburg where ductile Zechstein salt decouples deep rooted faulting from supra-salt deformation.     

西非被动大陆边缘盐构造样式与成因机制

基于三维地震资料,对西非陆缘盐构造样式及分布特征进行了刻画,剖析了其形成演化机制与控制因素。西非陆缘盐上地层滑脱形成典型的薄皮构造,前缘发育挤压变形,后缘发育拉张变形,两者之间为过渡变形。拉张区发育白垩系盐筏、前盐筏、新近系盐筏等盐构造;过渡变形区以发育各种底辟构造为特征;挤压变形区主要发育侵位盐席构造。重力滑脱作用是被动陆缘盐构造发育过程中始终存在的驱动机制,重力扩展作用在大陆边缘成熟阶段作用明显,在陆缘演化早期并不突出。陆缘构造活动控制盐构造的形成,差异沉积负载作用影响着盐上地层滑移特征,而盐下底形对盐岩流动、盐上地层滑移速率及相关断裂体系的产生与沉积响应具有重要影响。     

西非被动大陆边缘重力滑脱构造体系下的塑性构造

论述了西非被动大陆边缘深水环境下的重力滑脱构造体系中的塑性构造。研究发现塑性地层在整个西非被动大陆边缘都有分布,且盐岩塑性层主要分布在西非被动大陆边缘的西南部和西北部,发育层位为过渡期(J-K)构造层之内;中部尼日尔三角洲等塑性层主要为泥岩塑性层,发育层位为古近系和新近系。根据重力滑脱构造体系发育特征可划分为:以正断裂和塑性焊接构造为主的上部重力滑脱伸展构造、以底辟构造为主的中部重力滑脱底辟构造、以冲断裂、塑性褶皱和塑性冲断构造为主的下部重力滑脱冲断构造。根据塑性构造上覆地层的变形过程,塑性构造演化主要经历了后生变形期和同生变形期。塑性构造变形机制主要受基底掀斜作用和上覆地层的沉积速率控制。塑性构造中的底辟、褶皱、冲断及塑性焊接构造对油气成藏的控制作用依次减弱。     

Cold seeps at the salt front in the Lower Congo Basin II: The impact of spatial and temporal evolution of salt-tectonics on hydrocarbon seepage

This study investigates the distribution and evolution of seafloor seepage in the vicinity of the salt front, i.e., the seaward boundary of salt-induced deformation in the Lower Congo Basin (LCB). Seafloor topography, backscatter data and TV-sled observations indicate active fluid seepage from the seafloor directly at the salt front, whereas suspected seepage sites appear to be inactive at a distance of >10 km landward of the deformation front. High resolution multichannel seismic data give detailed information on the structural development of the area and its influence on the activity of individual seeps during the geologic evolution of the salt front region. The unimpeded migration of gas from fan deposits along sedimentary strata towards the base of the gas hydrate stability zone within topographic ridges associated with relatively young salt-tectonic deformation facilitates seafloor seepage at the salt front. Bright and flat spots within sedimentary successions suggest geological trapping of gas on the flanks of mature salt structures in the eastern part of the study area. Onlap structures associated with fan deposits which were formed after the onset of salt-tectonic deformation represent potential traps for gas, which may hinder gas migration towards seafloor seeps. Faults related to the thrusting of salt bodies seawards also disrupt along-strata gas migration pathways. Additionally, the development of an effective gas hydrate seal after the cessation of active salt-induced uplift and the near-surface location of salt bodies may hamper or prohibit seafloor seepage in areas of advanced salt-tectonic deformation. This process of seaward shifting active seafloor seepage may propagate as seaward migrating deformation affects Congo Fan deposits on the abyssal plain. These observations of the influence of the geologic evolution of the salt front area on seafloor seepage allows for a characterization of the large variety of hydrocarbon seepage activity throughout this compressional tectonic setting.     

Shear sense inversion in the Hilti mantle section (Oman ophiolite) and active mantle uprise

Structural analyses in the well-exposed Hilti mantle section in the Oman ophiolite suggest a model of forceful horizontal flow in the uppermost mantle at the edge of a diapir below a oceanic spreading center. Detailed structural mapping, focussed on high-T deformation (i.e., asthenospheric flow), revealed a gently undulated flat structure with a uniform east-west flow direction. When it is related to the N–S to NNW–SSE trending, vertical sheeted dike complex located to the east, this mantle flow is parallel to the spreading direction. Because the Moho is so flat lying, a large dunite occurrence at the south-western region is possibly ascribed to the Moho Transition Zone. Kinematic analysis shows that the shear direction generally changes from top-to-the west in the upper level, to top-to-the east in the lower level with respect to the Moho. This shear sense inversion is explained by a model of forceful flow due to an active mantle uprise and it is not compatible with a passive mantle uprise. In the plan section, the boundary of the shear sense inversion is subparallel to the flow direction and subperpendicular to the spreading axis. In cross section, the boundary appears to occur at various depths in the range of 200 m to 500 m. It shows that the active mantle uprise in the diapir center resulted in a channelled horizontal flow.     

Bannu Basin,fold-and-thrust belt of northern Pakistan: Subsurface imaging and its implications for hydrocarbon exploration

The Trans Indus-Salt Range, located in northern Pakistan, is one of the most tectonically active fold-and-thrust belts and comprises three main regions: the Potwar-Salt Range, the Kohat-Surghar Range and the Bannu Basin-Khisor Range. Of these, the Bannu Basin is the least studied and only a handful of publically accessible datasets and publications are available. Recently made public 2D seismic profiles and well data from the Bannu Basin indicate the presence of salt as well as evidence for a main detachment surface which is Neoproterozoic in age. Our findings suggest that the Salt Range Formation could be the main detachment for the entire basin.Interpretation also shows a Miocene-Eocene basin-wide unconformity that marks the Himalayan orogenic event which separates the pre-Himalayan from the syn-Himalayan sedimentary units. On the basis of seismic reflection data, we conclude that the basin experienced three main tectonic settings. An early stage of pre-Himalayan passive tectonic environment is followed by the compressional Himalayan tectonics which resulted in uplifted areas sourcing the fluviatile fill of the subsided basin. During this time, sedimentation from the northern margin of the basin may have influenced the southward flow of salt. This is followed by a more recent stage of thrusting that produced folds and thrusts deforming all of the sedimentary units.Structural geometries suggest that prospective traps are developed mainly in the anticlines outlining the eastern and western boundaries of the Bannu Basin, as well as the southern zone of the basin. Furthermore, the presence of salt diapirism and transpression zones together with numerous oil seeps in and around the basin increase the probability of hydrocarbon accumulation and indicate great potential for future exploration.     

Relationship between salt diapirism and faulting in the central structural belt of the Dongying sag, Bohai Gulf basin, China

1 Introduction D iapiric structures are an im portant andw idespread structural style in m any tectonic settings(Ism ail-Zadeh etal.,2001),including m agm a diapirs,salt diapirs, m ud diapirs, and serpentinite diapirs.C om pared w ith the form ertw o,m ud diapirism in sedi-m ents is rarely reported and studied although it hasbeen know n for a long tim e both on land and underthe sea.H ow ever,w ith the geologicalinvestigations ofO D P and related on-land studies of accretionaryprism s, m ud…