Geology,mineralogy, and geochemistry of fault-controlled hydrothermal Cu–Au mineralization in the Shanmen Volcanic Basin,SE China

The Yukeng–Banling deposit is a typical fault-controlled hydrothermal Cu–Au deposit in the Shanmen Volcanic Basin (SVB), SE China. Ore bodies commonly occur as lodes, lenses and disconnected pods dipping SW with vertical zonation of ore minerals. Ore-related hydrothermal alteration is well developed on both sides of the veins, dominated by silicification, sericitization, chloritization and argillation with a banded alteration zonation. The mineralization can be divided into three stages (stages I, II and III). Native gold is present as veinlets in fractures of fine-grained pyrite from stage II.Zircon U–Pb and Rb–Sr isochron ages indicate that the Cu–Au mineralization is coeval with the Caomen alkaline granite and Xiaokeng quartz-diorite, both emplaced at ca. 102 Ma. Microthermometric measurements of fluid inclusions in quartz and sphalerite from stage II veins indicate that the Yukeng–Banling deposit is an epithermal deposit. Six ore-related quartz grains have δD_H2O values of − 69 to − 43‰, and δ¹⁸O_H2O values calculated using total homogenization temperatures that range from − 2.0 to 0.7‰. All samples plot in an area between the magmatic field and the meteoric line, suggesting that the ore-forming fluids are derived from a mixed source of magmatic and meteoric waters. δ³⁴S values for eight pyrite separates range from − 2.1 to + 4.1‰ with an average of + 1.7‰, and δ³⁴S values for galena and sphalerite are 2.3‰ and 2.2‰, similar to magmatic sulfur. Four alkaline granite samples have Pb isotopic ratios (²⁰⁶Pb/²⁰⁴Pb)_t = 18.175–18.411, (²⁰⁷Pb/²⁰⁴Pb)_t = 15.652–15.672 and (²⁰⁸Pb/²⁰⁴Pb)_t = 38.343–38.800. Three quartz-diorite samples have ratios (²⁰⁶Pb/²⁰⁴Pb)_t, (²⁰⁷Pb/²⁰⁴Pb)_t and (²⁰⁸Pb/²⁰⁴Pb)_t of 18.277–18.451, 15.654–15.693 and 38.673–38.846, respectively. These age-calculated lead isotopic data for alkaline granite are similar to those for the analyzed sulfides. Co/Ni ratios for stage II pyrites range from 1.42 to 5.10, indicating that the Yukeng–Banling deposit records the past involvement of magmatic hydrothermal fluids. The isotope data, together with geological, mineralogical and geochronological evidence, favor a primary magmatic source for sulfur and metals in the ore fluids. Mixing of the Cu- and Au-rich fluids with meteoric water led to precipitation of the Cu–Au veins along NW-trending faults.The Yukeng–Banling deposit, the contemporaneous Caomen alkaline granite and Xiaokeng quartz-diorite in the SVB formed under an extensional setting, due to high-angle subduction of the paleo-Pacific plate. The extensional setting facilitated the formation of Cu- and Au-rich magmas which was derived from enriched mantle and lower crust.     

The sources of ore-forming material in the low-sulfidation epithermal Wulaga gold deposit,NE China: Constraints from S,Pb isotopes and REE pattern

The Wulaga gold deposit, located in Heilongjiang province, NE China, is a subvolcanic rock-hosted, low-sulfidation epithermal gold deposit, and has an Au reserve of about 84 tons. The gold mineralization occurs in a crypto-explosive breccia, and is spatially and temporally associated with an Early Cretaceous granodioritic porphyry. Three individual stages of mineralization have been identified in the Wulaga gold deposit: an early white quartz-euhedral vein stage, a fine-grained pyrite–marcasite–stibnite–chalcedony stage, and a late calcite–pyrite stage. The sulfur isotopic values of sulfide minerals vary in a wide range from − 4 to 4.9‰, but are concentrated in the range of − 3 to 0‰, implying that sulfur in the hydrothermal fluids was derived from magmatic volatiles. Lead isotopic results of the granodioritic porphyry (²⁰⁶Pb/²⁰⁴Pb = 18.341–18.395, ²⁰⁷Pb/²⁰⁴Pb = 15.507–15.523, ²⁰⁸Pb/²⁰⁴Pb = 38.174–38.251) and sulfide minerals (²⁰⁶Pb/²⁰⁴Pb = 18.172–18.378, ²⁰⁷Pb/²⁰⁴Pb = 15.536–15.600, ²⁰⁸Pb/²⁰⁴Pb = 38.172–38.339) are comparatively consistent and clustered together between the orogenic and upper mantle lines, indicating the lead in the ores is closely related to the parent magma of the granodioritic porphyry. The REE patterns of fluid inclusions trapped in sulfides are similar to those of the granodioritic porphyry, which confirms the magmatic origin of the REE in the hydrothermal fluids. The characteristics of S and Pb isotopes and REE suggest that the ore-forming materials of the Wulaga gold deposit are partly magmatic in origin, and related to a high-level hydrous granodioritic magma.     

Fluid evolution and ore genesis of the A'gui Cu deposit in southern Great Xing'an Range,Northeast China: Evidence from fluid inclusion and C–H–O–S–Pb isotopes

The A'gui Cu deposit is located in the eastern slope of the southern Great Xing'an Range (SGXR), and it is a vein-type Cu deposit spatially and temporally related to the Cretaceous monzogranite which intruded Pingshan Formation. Vein-type Cu orebodies are mainly hosted in the NE and nearly EW faults. Previous studies on the A'gui deposit mainly focused on geological exploration, and there was no study on its fluid evolution and genesis. Therefore, we carried out conducted fluid inclusion and stable isotope (C–H–O–S–Pb) analysis to study the fluid evolution, fluid and ore-forming material sources and genesis of the A'gui deposit. According to the field investigations and mineral crosscutting relationships, four paragenetic stages were identified: quartz–pyrite–chalcopyrite–pyrrhotite–arsenopyrite ± magnetite (Stage I), quartz–pyrite–chalcopyrite (Stage II), quartz–chalcopyrite ± pyrite–sphalerite–galena (Stage III) and carbonate ± quartz (Stage IV). From Stage I to Stage II, the assemblage of fluid inclusions (FIs) in quartz is characterized by the development of daughter mineral–bearing three–phase FIs (SL–type), vapour FIs (V–type), vapour–rich two–phase aqueous FIs (LV–type) and liquid–rich two–phase aqueous FIs (VL–type). Only VL–type FIs appeared in the Stage III quartz and Stage IV calcite. The homogenization temperatures of FIs in stages I, II, III and IV are 329–390 °C, 255–336 °C, 166–244 °C and 120–157 °C, with salinities of 3.37–45.33 wt%, 3.53–39.76 wt%, 4.17–7.86 wt% and 3.37–7.15 wt% NaCl eqv., respectively. The fluid inclusion type assemblage suggested that obvious fluid boiling occurred in the Stage I and Stage II. Fluid boiling may be the reason for the precipitation of useful minerals. According to the HO isotope analysis of stages I–II quartz (δ¹⁸O_H2O = −2.1 to 3.2 ‰, δD_V–SMOW = −128.4 ‰ to −110.6 ‰), the fluid was originally magmatic water. From Stage III to Stage IV (δ¹⁸O_H2O = −12.3 to −2.3 ‰, δD_V–SMOW = −129.6 ‰ to −104.2 ‰), the HO isotope value is obviously close to the meteoric water line, indicating that meteoric water is mixed with evolved magmatic solutions. The ore–forming fluid of the A'gui deposit represents a medium–high temperature NaCl-H₂O magmatic hydrothermal system. The C isotope compositions (δC_V–PDB = −5.74 ‰ to −4.76 ‰) in stage IV indicate that the C in the fluid was derived from a magmatic source and was affected by meteoric water. In addition, the measured S isotope compositions in stages I–III of the hydrothermal fluids (δ³⁴S_V–CDT = 2.2 to 3.7 ‰) indicate that S mainly comes from granitic magma. Further, the Pb isotope (²⁰⁶Pb/²⁰⁴Pb = 18.276–18.367, ²⁰⁷Pb/²⁰⁴Pb = 15.52–15.556, ²⁰⁸Pb/²⁰⁴Pb = 38.157–38.193) in stages I–III indicate that the ore-forming materials are derived from the mixture of mantle and orogenic material. In summary, this study showed the A'gui is a typical magmatic hydrothermal vein-type Cu deposit that related to Cretaceous monzogranite formed under the joint constraints of Mongolia-Okhotsk Ocean and Paleo-Pacific Ocean tectonic system. Fluid boiling and mixing are the main ore-forming mechanism.     

Geological,fluid inclusion and isotopic studies of the Yinshan Cu–Au–Pb–Zn–Ag deposit,South China: Implications for ore genesis and exploration

The Yinshan Cu–Au–Pb–Zn–Ag deposit is located in Dexing, South China. Ore bodies are primarily hosted in low-grade phyllite of the Neoproterozoic Shuangqiaoshan Group along EW- and NNW-striking fault zones. Pb–Zn–Ag mineralization is dictated by Jurassic rhyolitic quartz porphyries (ca. 172 Ma), whereas Cu–Au mineralization is associated with Jurassic dacite porphyries (ca. 170 Ma). The main ore minerals are pyrite, chalcopyrite, galena, sphalerite, tetrahedrite–tennatite, gold, silver, and silver sulphosalt, and the principal gangue minerals are quartz, sericite, calcite, and chlorite. Two-phase liquid-rich (type I), two-phase vapor-rich (type II), and halite-bearing (type III) fluid inclusions can be observed in the hydrothermal quartz-sulfides veins. Type I inclusions are widespread and have homogenization temperatures of 187–303 °C and salinities of 4.2–9.5 wt.% NaCl equivalent in the Pb–Zn–Ag mineralization, and homogenization temperatures of 196–362 °C and salinities of 3.5–9.9 wt.% NaCl equivalent in the Cu–Au mineralization. The pervasive occurrence of type I fluid inclusions with low-moderate temperatures and salinities implies that the mineralizing fluids formed in epithermal environments. The type II and coexisting type III inclusions, from deeper levels below the Cu–Au ore bodies, share similar homogenization temperatures of 317–448 °C and contrasting salinities of 0.2–4.2 and 30.9–36.8 wt.% NaCl equivalent, respectively, which indicates that boiling processes occurred. The sulfur isotopic compositions of sulfides (δ³⁴S = −1.7‰ to +3.2‰) suggest a homogeneous magmatic sulfur source. The lead isotopes of sulfides (²⁰⁶Pb/²⁰⁴Pb = 18.01–18.07; ²⁰⁷Pb/²⁰⁴Pb = 15.55–15.57; and ²⁰⁸Pb/²⁰⁴Pb = 38.03–38.12) are consistent with those of volcanic–subvolcanic rocks (²⁰⁶Pb/²⁰⁴Pb = 18.03–18.10; ²⁰⁷Pb/²⁰⁴Pb = 15.56–15.57; and ²⁰⁸Pb/²⁰⁴Pb = 38.02–38.21), indicating a magmatic origin for lead in the ore. The oxygen and hydrogen isotope compositions (δ¹⁸O = +7.8‰ to +10.5‰, δD = −66‰ to −42‰) of inclusion water in quartz imply that ore-forming fluids were mainly derived from magmatic sources. The local boiling process beneath the epithermal Cu–Au ore-forming system indicates the possibility that porphyry-style ore bodies may exist at even deeper zones.     

Geology,C–H–O–S–Pb isotope systematics and geochronology of the Yindongpo gold deposit,Tongbai Mountains,central China: Implication for ore genesis

The Yindongpo gold deposit is located in the Weishancheng Au–Ag-dominated polymetallic ore belt in Tongbai Mountains, central China. The ore bodies are stratabound within carbonaceous quartz–sericite schists of the Neoproterozoic Waitoushan Group. The ore-forming process can be divided into three stages, represented by early barren quartz veins, middle polymetallic sulfide veinlets and late quartz–carbonate stockworks, with most ore minerals, such as pyrite, galena, native gold and electrum being formed in the middle stage. The average δ¹⁸O_water values changed from 9.7‰ in the early stage, through 4.9‰ in the middle stage, to − 5.9‰ in the late stage, with the δD values ranging between − 65‰ and − 84‰. The δ¹³C_CO2 values of ore fluids are between − 3.7‰ and + 6.7‰, with an average of 1.1‰. The H–O–C isotope systematics indicate that the ore fluids forming the Yindongpo gold deposit were probably initially sourced from a process of metamorphic devolatilization, and with time gradually mixed with meteoric water. The δ³⁴S values range from − 0.3‰ to + 5.2‰, with peaks ranging from + 1‰ to + 4‰. Fourteen sulfide samples yield ²⁰⁶Pb/²⁰⁴Pb values of 16.990–17.216, ²⁰⁷Pb/²⁰⁴Pb of 15.419–15.612 and²⁰⁸Pb/²⁰⁴Pb of 38.251–38.861. Both S and Pb isotope ratios are similar to those of the main lithologies of the Waitoushan Group, but differ from other lithologic units and granitic batholiths in the Tongbai area, which suggest that the ore metals and fluids originated from the Waitoushan Group. The available K–Ar and ⁴⁰Ar/³⁹Ar ages indicate that the ore-forming process mainly took place in the period of 176–140 Ma, during the transition from collisional compression to extension and after the closure of the oceanic seaway in the Qinling Orogen. The Yindongpo gold deposit is interpreted as a stratabound orogenic-style gold system formed during the transition phase from collisional compression to extension.The ore metals in the Waitoushan Group were extracted, transported and then accumulated in the carbonaceous sericite schist layer. The carbonaceous sericite schist layer, especially at the junction of collapsed anticline axis and fault structures, became the most favorable locus for the ore bodies.     

Early Cretaceous gold mineralization in the Lesser Xing’an Range of NE China: the Yongxin example

ABSTRACT

The northern Lesser Xing’an Range in NE China hosts many gold deposits. However, genesis and tectonic background for the mineralization remain unclear. The newly discovered Yongxin gold deposit in this region provides a good example for understanding the related issues. Two economic orebodies have been recognized at Yongxin and they are mainly hosted in the hydrothermal breccias. Zircon U–Pb ages of granite porphyry and diorite porphyry are 119.3 ± 0.7 Ma and 119.9 ± 0.6 Ma, respectively. These data provide constraints to the upper limit of ore-forming age. The δ³⁴S values of pyrite from orebodies range from 2.3‰ to 5.1‰. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios of the pyrite are of 18.126–18.255, 15.492–15.537 and 37.880–38.019, respectively. The δ¹⁸O_H2O and δD values of ore-forming fluids range from ?12.5‰ to 1.8‰ and from ?124.8‰ to ?102.1‰, respectively. The REE compositions of gold-bearing pyrite are similar to those of the volcanic rocks of the Longjiang formation, diorite porphyry and granite porphyry. The combined geological, geochronological and geochemical characteristics of the Yongxin gold deposit indicate that the ore-forming materials were likely sourced from the volcanic rocks of the Longjiang formation, diorite porphyry and granite porphyry, whereas the ore-forming fluids are dominated by meteoric water. The Yongxin gold deposit could be a product of the Early Cretaceous large-scale gold mineralization in northeast China which occurred in an extensional tectonic setting and were related to the rollback of the subducted Paleo-Pacific Oceanic Plate beneath the continental margin of northeast China.     

Ore genesis and hydrothermal evolution of the Huanggang skarn iron–tin polymetallic deposit,southern Great Xing'an Range: Evidence from fluid inclusions and isotope analyses

The southern Great Xing'an Range is one of the most important metallogenic belts in northern China, and contains numerous Pb–Zn–Ag–Cu–Sn–Fe–Mo deposits. The Huanggang iron–tin polymetallic skarn deposit is located in the Sn-polymetallic metallogenic sub-belt. Skarns and iron orebodies occur as lenses along the contact between granite plutons and the Lower Permian Huanggangliang Formation marble or Dashizhai Formation andesite. Field evidence and petrographic observations indicate that the three stages of hydrothermal activity, i.e., skarn, oxide and sulfide stages, all contributed to the formation of the Huanggang deposit.The skarn stage is characterized by the formation of garnet and pyroxene, and high-temperature, hypersaline hydrothermal fluids with isotopic compositions that are similar to those of typical magmatic fluids. These fluids most likely were generated by the separation of brine from a silicate melt instead of being a product of aqueous fluid immiscibility. The iron oxide stage coincides with the replacement of garnet and pyroxene by amphibole, chlorite, quartz and magnetite. The hydrothermal fluids of this stage are represented by L-type fluid inclusions that coexist with V-type inclusions with anomalously low δD values (approximately − 100 to − 116‰). The decrease in ore fluid δ¹⁸O_H2O values with time coincides with marked decreases in the fluid salinity and temperature. Based on the fluid inclusion and stable isotopic data, the ore fluid evolved by boiling of the magmatic brine. The sulfide stage is characterized by the development of sphalerite, chalcopyrite, fluorite, and calcite veins, and these veins cut across the skarns and orebodies. The fluids during this stage are represented by inclusions with a variable but continuous sequence of salinities, mainly low-salinity inclusions. These fluids yield the lowest δ¹⁸O_H2O values and moderate δD values ( − 1.6 to − 2.8‰ and − 101 to − 104‰, respectively). The data indicate that the sulfide stage fluids originated from the mixing of residual oxide-stage fluids with various amounts of meteoric water. Boiling occurred during this stage at low temperatures.The sulfur isotope (δ³⁴S) values of the sulfides are in a narrow range of − 6.70 to 4.50‰ (mean = − 1.01‰), and the oxygen isotope (δ¹⁸O) values of the magnetite are in a narrow range of 0.1 to 3.4‰. Both of these sets of values suggest that the ore-forming fluid is of magmatic origin. The lead isotope compositions of the ore (²⁰⁶Pb/²⁰⁴Pb = 18.252–18.345, ²⁰⁷Pb/²⁰⁴Pb = 15.511–15.607, and ²⁰⁸Pb/²⁰⁴Pb = 38.071–38.388) are consistent with those of K-feldspar granites (²⁰⁶Pb/²⁰⁴Pb = 18.183–18.495, ²⁰⁷Pb/²⁰⁴Pb = 15.448–15.602, ²⁰⁸Pb/²⁰⁴Pb = 37.877–38.325), but significantly differ from those of Permian marble (²⁰⁶Pb/²⁰⁴Pb = 18.367–18.449, ²⁰⁷Pb/²⁰⁴Pb = 15.676–15.695, ²⁰⁸Pb/²⁰⁴Pb = 38.469–38.465), which also suggests that the ore-forming fluid is of magmatic origin.     

http://www.sciencedirect.com/science/article/pii/S1674987113000790

The Heilangou gold deposit is located in the northern QixiaePenglai gold belt, which is one amongst the three large gold belts in the eastern Shandong Province （Jiaodong Peninsula）. The ore body has formed within the Guojialing granite. In this study, we report the mineral chemistry of pyrite, as well as the S, Pb, and HeO isotope data of the Heilangou gold deposit. The chemical composition of pyrite in the Heilangou gold deposit indicates that the associated gold deposit is a typical magmatic hydrothermal one. The geochemical signatures and crystal structure of pyrite show that the ore-forming materials have been derived from the crust. The S isotope data of the pyrites from Heilangou show an overall range from 5.5 to 7.8＆amp;and an average of 6.7＆amp;. The S isotope data in this deposit are similar to those from the deposits in the Jiaodong gold belt. The Pb and S isotope variations are small in the Heilangou gold deposit. The 206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb ratios are 17.4653e17.5958, 15.5105e15.5746 and 38.0749e38.4361, respec-tively. These data plot between the lower crust and the orogenic belt. The Pb isotope data in the Heilangou gold deposit are similar to those in the Linglong gold deposit. From the Qixia gold area （the Liukou and Majiayao gold deposits） to the MupingeRushan gold belt （Rushan gold deposit） to the ZhaoeYe gold belt （the Linglong, Sanshandao and Jiaojia gold deposits）, the 206Pb/204Pb ratios progressively increase. The DeO isotope data obtained from quartz separates suggest that the ore-forming fluid was similar to a mixture of magmatic and meteoric waters. These results suggest that the ore-forming elements were primarily from source fluids derived from the lower crust.     

SHRIMP zircon U–Pb geochronology,geochemistry and H–O–Si–S–Pb isotope systematics of the Kanggur gold deposit in Eastern Tianshan,NW China: Implication for ore genesis

The Kanggur gold deposit is located in the southern margin of the Central Asia Orogenic Belt and in the western segment of the Kanggur–Huangshan ductile shear belt in Eastern Tianshan, northwestern China. The orebodies of this deposit are hosted in the Lower Carboniferous volcanic rocks of the Aqishan Formation and mainly consist of andesite, dacite and pyroclastic rocks. The SHRIMP zircon U–Pb age data of the andesite indicate that the volcanism in the Kanggur area might have occurred at ca. 339 Ma in the Early Carboniferous, and that the mineralization age of the Kanggur gold deposit was later than the age of volcanic rocks in the area. Geochemically, the andesite rocks of the Aqishan Formation belong to low-tholeiite and calc-alkaline series and display relative depletions in high field strength elements (HFSEs; i.e. Nb, Ta and Ti). The δ¹⁸O_w and δD_w values vary from − 9.1‰ to + 3.8‰ and − 66.0‰ to − 33.9‰, respectively, indicating that the ore-forming fluids were mixtures of metamorphic and meteoric waters. The δ³⁰Si values of 13 quartz samples range from − 0.3‰ to + 0.1‰ with an average of − 0.15‰, and the δ³⁴S values of 18 sulphide samples range from − 0.9‰ to + 2.2‰ with an average of + 0.54‰. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb values of 10 sulphide samples range from 18.166 to 18.880, 15.553 to 15.635 and 38.050 to 38.813, respectively, showing similarities to orogenic Pb; these values are consistent with those of the andesite from the Kanggur area, suggesting a common lead source. All of the silicon, sulphur and lead isotopic systems indicate that the ore-forming fluids and materials were mainly derived from the Aqishan Formation, and that the host volcanic rocks of the Aqishan Formation probably played a significant role in the Kanggur gold mineralization. Integrating the data obtained from studies on geology, geochronology, petro-geochemistry and H–O–Si–S–Pb isotope systematics, we suggest that the Kanggur gold deposit is an orogenic-type deposit formed in Eastern Tianshan orogenic belt during the Permian post-collisional tectonism.     

Geochronological framework and Pb, Sr isotope geochemistry of the Qingchengzi Pb–Zn–Ag–Au orefield, Northeastern China

The Qingchengzi orefield in northeastern China, is a concentration of several Pb–Zn, Ag, and Au ore deposits. A combination of geochronological and Pb, Sr isotopic investigations was conducted. Zircon SHRIMP U–Pb ages of 225.3 ± 1.8 Ma and 184.5 ± 1.6 Ma were obtained for the Xinling and Yaojiagou granites, respectively. By step-dissolution Rb–Sr dating, ages of 221 ± 12 Ma and 138.7 ± 4.1 Ma were obtained for the sphalerite of the Zhenzigou Zn–Pb deposit and pyrargyrite of the Ag ore in the Gaojiabaozi Ag deposit, respectively. Pb isotopic ratios of the Ag ore at Gaojiabaozi (²⁰⁶Pb/²⁰⁴Pb = 18.38 to 18.53) are higher than those of the Pb–Zn ores (²⁰⁶Pb/²⁰⁴Pb = 17.66 to 17.96; Chen et al. [Chen, J.F., Yu, G., Xue, C.J., Qian, H., He, J.F., Xing, Z., Zhang, X., 2005. Pb isotope geochemistry of lead, zinc, gold and silver deposit clustered region, Liaodong rift zone, northeastern China. Science in China Series D 48, 467–476.]). Triassic granites show low Pb isotopic ratios (²⁰⁶Pb/²⁰⁴Pb = 17.12 to 17.41, ²⁰⁷Pb/²⁰⁴Pb = 15.47 to 15.54, ²⁰⁸Pb/²⁰⁴Pb = 37.51 to 37.89) and metamorphic rocks of the Liaohe Group have high ratios (²⁰⁶Pb/²⁰⁴Pb = 18.20 to 24.28 and 18.32 to 20.06, ²⁰⁷Pb/²⁰⁴Pb = 15.69 to 16.44 and 15.66 to 15.98, ²⁰⁸Pb/²⁰⁴Pb = 37.29 to 38.61 and 38.69 to 40.00 for the marble of the Dashiqiao Formation and schist of the Gaixian Formation, respectively).Magmatic activities at Qingchengzi and in adjacent regions took place in three stages, and each contained several magmatic pulses: ca. 220 to 225 Ma and 211 to 216 Ma in the Triassic; 179 to 185 Ma, 163 to 168 Ma, 155 Ma and 149 Ma in the Jurassic, as well as ca. 140 to 130 Ma in the Early Cretaceous. The Triassic magmatism was part of the Triassic magmatic belt along the northern margin of the North China Craton produced in a post-collisional extensional setting, and granites in it formed by crustal melting induced by mantle magma. The Jurassic and Early Cretaceous magmatism was related to the lithospheric delamination in eastern China. The Triassic is the most important metallogenic stage at Qingchengzi. The Pb–Zn deposits, the Pb–Zn–Ag ore at Gaojiabaozi, and the gold deposits were all formed in this stage. They are temporally and spatially associated with the Triassic magmatic activity. Mineralization is very weak in the Jurassic. Ag ore at Gaojiabaozi was formed in the Early Cretaceous, which is suggested by the young Rb–Sr isochron age, field relations, and significantly different Pb isotopic ratios between the Pb–Zn–Ag and Ag ores. Pb isotopic compositions of the Pb–Zn ores suggest binary mixing for the source of the deposits. The magmatic end-member is the Triassic granites and the other metamorphic rocks of the Liaohe Group. Slightly different proportions of the two end-members, or an involvement of materials from hidden Cretaceous granites with slightly different Pb isotopic ratios, is postulated to interpret the difference of Pb isotopic compositions between the Pb–Zn–(Ag) and Ag ores. Sr isotopic ratios support this conclusion. At the western part of the Qingchengzi orefield, hydrothermal fluid driven by the heat provided by the now exposed Triassic granites deposited ore-forming materials in the low and middle horizons of the marbles of the Dashiqiao Formation near the intrusions to form mesothermal Zn–Pb deposits. In the eastern part, hydrothermal fluids associated with deep, hidden Triassic intrusions moved upward along a regional fault over a long distance and then deposited the ore-forming materials to form epithermal Au and Pb–Zn–Ag ores. Young magmatic activities are all represented by dykes across the entire orefield, suggesting that the corresponding main intrusion bodies are situated in the deep part of the crust. Among these, only intrusions with age of ca. 140 Ma might have released sufficient amounts of fluid to be responsible for the formation of the Ag ore at Gaojiabaozi.Our age results support previous conclusions that sphalerite can provide a reliable Rb–Sr age as long as the fluid inclusion phase is effectively separated from the “sulfide” phase. Our work suggests that the separation can be achieved by a step-resolution technique. Moreover, we suggest that pyrargyrite is a promising mineral for Rb–Sr isochron dating.     

Geochemistry,Zircon U–Pb Analysis,and Biotite 40Ar/39Ar Geochronology of the Maoling Gold Deposit,Liaodong Rift,NE China

The Maoling gold deposit is located in the southwestern part of the Liaodong rift, NE China, and has estimated reserves of 25 t. In this paper we present the results of an investigation into the geochronology and geodynamic mechanisms of igneous activity and metallogenesis within the Maoling gold deposit. New zircon U–Pb age data, biotite ⁴⁰Ar/³⁹Ar age data, whole‐rock geochemistry, and Hf isotopic analyses are presented in order to constrain the petrogenesis and mineralization of the deposit. Zircon U–Pb dating of the Wolongquan biotite monzogranite and Maoling biotite granite yielded mean ages of 194.0 ± 1.1 Ma and 196.1 ± 1.1 Ma, respectively. All the granites are characteristically high‐K calc‐alkaline, enriched in light rare earth elements and large ion lithophile elements, and depleted in high field strength elements, which is consistent with the geochemical characteristics of arc‐type magmas. The Hf isotope characteristics indicate that the granites formed by partial melting of early Paleoproterozoic crustal material. In addition, biotite ⁴⁰Ar/³⁹Ar dating indicates that the Maoling gold deposit formed at 188.9 ± 1.2 Ma, implying that the mineralization was related to both the granite intrusions. Taking into account previous data on S–Pb–O–H isotopes and our new age data, the Maoling deposit can be classified as an intrusion‐related gold deposit. Taking into account the geology of the study area and adjacent regions, we propose that the Maoling gold deposit and its associated granitic intrusions formed in a geodynamic setting that was dominated by subduction of the Paleo‐Pacific Plate beneath the Eurasian continent.     

Geological,fluid inclusion,and O–C–S–Pb–He–Ar isotopic constraints on the genesis of the Honghuagou lode gold deposit,northern North China Craton

The Honghuagou Au deposit is located in the Chifeng-Chaoyang region within the northern margin of the North China Craton. The auriferous quartz veins are mainly hosted in the mafic gneiss and migmatite of the Neoarchean Xiaotazigou Formation along NNW- and NE-striking faults, with pyrite as the predominant ore mineral. The gold mineralization process can be divided into two stages, involving stage I quartz-pyrite and stage II quartz-calcite-polymetallic sulfide. Three types of fluid inclusions (FIs) have been identified in the Honghuagou deposit, namely, carbonic inclusions, aqueous‑carbonic inclusions, and aqueous inclusions. Quartz of stage I contains all types of FIs, whereas only aqueous inclusions are evident in stage II veins. The FIs of stages I and II yield homogenization temperatures of 275–340 °C and 240–290 °C with salinities of 3.4–10.7 wt% and 1.4–9.7 wt% NaCl eqv., respectively. The ore-forming fluids are characterized by medium temperature and low salinity, belonging to the H₂O–NaCl–CO₂ system. The δ¹⁸O_H2O values of the ore fluids are between 2.1‰ and 5.9‰, within the range of enriched mantle-derived fluids in the North China Craton. The carbon isotope compositions of calcite (δ¹³C_PDB = −4.4‰ to −4‰) are also similar to mantle carbon. He-Ar isotope data (³He/⁴He = 0.38–0.44 Ra; ⁴⁰Ar/³⁶Ar = 330–477) of fluid inclusions in pyrite indicate a mixed crustal and mantle source for the ore-forming fluids. Whereas, S-Pb isotope compositions of sulfides reveal that ore metals are principally derived from crustal rocks. On the basis of available geological and geochemical evidence, we suggest that the Honghuagou deposit is an orogenic gold deposit.     

Genesis of the Zhengguang gold deposit in the Duobaoshan ore field,Heilongjiang Province,NE China: Constraints from geology,geochronology and S-Pb isotopic compositions

The Zhengguang gold deposit in the Duobaoshan ore field, hosted in volcanic rocks of the Middle Ordovician Duobaoshan Formation, is one of the largest gold deposits in the Northeastern Great Xing’an Range of the Central Asian Orogenic Belt (CAOB). The deposit comprises the No. I, II and III ore zones with a total resource exceeding 35 tonnes of Au, 100,000 tonnes of Zn and 100 tonnes of Ag. A genetic relationship between gold mineralization and concealed tonalite porphyry is inferred based on the characteristics of cryptoexplosive breccia and hydrothermal alteration indicative of porphyry-type and epithermal mineralization. Zircon LA-ICPMS U-Pb dating reveals that the tonalite porphyry was emplaced at 462.1 ± 1.8 Ma (Middle Ordovician). The δ³⁴S_V-CDT values of sulfide minerals range from −3.0‰ to −1.7‰ with an average of −2.33‰, indicating that sulfur was mainly derived from a magmatic source. The Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb ranging from 17.572 to 17.629, ²⁰⁷Pb/²⁰⁴Pb from 15.424 to 15.486, and ²⁰⁸Pb/²⁰⁴Pb from 37.206 to 37.418) suggest a major mantle component for Pb and, by inference, for other ore metals. Therefore, we suggest that the ore-forming elements in the Zhengguang gold deposit may be related to the mantle-sourced tonalite porphyry. On the basis of the geological characteristics and geochemical signatures documented in this study, we conclude that the Zhengguang gold deposit was formed in a porphyry to epithermal transitional environment associated with the concealed tonalite porphyry, as part of the Duobaoshan porphyry-epithermal ore system that is related to the subduction of the Paleo-Asian Ocean during the Ordovician.     

Metallogenesis and ore-forming time of the Changtuxili Mn–Ag–Pb–Zn deposit in Inner Mongolia: Evidence from C–O–S isotopes and U–Pb geochronology

This paper reports new geochronological (U–Pb) and isotope (C, O, and S) data to investigate the timing of mineralization and mode of ore genesis for the recently discovered Changtuxili Mn–Ag–Pb–Zn deposit, located on the western slopes of the southern Great Hinggan Range in NE China. The mineralization is hosted by intermediate–acidic lavas and pyroclastic rocks of the Baiyingaolao Formation. Three stages of mineralization are identified: quartz–pyrite (Stage I), galena–sphalerite–tetrahedrite–rhodochrosite (Stage II), and quartz–pyrite (Stage III). δ¹³C and δ¹⁸O values for carbonate from the ore vary from −8.51‰ to −4.96‰ and 3.97‰ to 15.90‰, respectively, which are indicative of a low-temperature alteration environment. δ³⁴S_V-CDT values of sulfides range from −1.77‰ to 4.16‰ and show a trend of equilibrium fractionation (δ³⁴S_Py ​> ​δ³⁴S_Sp ​> ​δ³⁴S_Gn). These features indicate that pyrite, sphalerite, and galena precipitated during the period of mineralization. The alteration mineral assemblage and isotope data indicate that the weakly acidic to weakly alkaline ore-forming fluid was derived largely from meteoric water and the ore-forming elements C and S originated from magma. During the mineralization, a geochemical barrier was formed by changes in the pH of the ore-forming fluid, leading to the precipitation of rhodochrosite. On the basis of the mineralization characteristics, new isotope data, and comparison with adjacent deposits, we propose that the Changtuxili Mn–Ag–Pb–Zn deposit is an intermediate-to low-sulfidation epithermal deposit whose formation was controlled by fractures and variability in the pH of the ore-forming fluid. The surrounding volcanic rocks yield zircon U–Pb ages of 160−146 ​Ma (Late Jurassic), indicating that the mineralization is younger than 146 ​Ma.     

The origin of the Maozu carbonate-hosted Pb–Zn deposit,southwest China: Constrained by C–O–S–Pb isotopic compositions and Sm–Nd isotopic age

The Maozu Pb–Zn deposit, located on the western margin of the Yangtze Block, southwest China, is a typical carbonate-hosted deposit in the Sichuan–Yunnan–Guizhou Pb–Zn metallogenic province with Pb + Zn reserves of about 2.0 million tonnes grading 4.15 wt.% Pb and 7.25 wt.% Zn. Its ore bodies are hosted in Sinian (635–541 Ma) Dengying Formation dolostone and show stratiform, vein and irregular textures. Ores are composed of sphalerite, galena, pyrite, calcite, dolomite, quartz and fluorite with massive, banded, disseminated and veined structures. The C–O–Sm–Nd isotopic compositions of hydrothermal calcites and S–Pb isotopic compositions of sulfides were analyzed to constrain the origin of the Maozu deposit. δ¹³C_PDB and δ¹⁸O_SMOW values of hydrothermal calcites range from −3.7‰ to −2.0‰ and +13.8‰ to +17.5‰, respectively, and plot near the marine carbonate rocks field in a plot of δ¹³C_PDB vs. δ¹⁸O_SMOW, with a negative correlation. It suggests that CO₂ in the hydrothermal fluids was mainly originated from marine carbonate rocks, with limited influence from sedimentary organic matter. δ³⁴S_CDT values of sulfides range from +9.9‰ to +19.2‰, similar to that of Cambrian to Triassic seawater sulfate (+15‰ to +35‰) and evaporate (+15‰ to +30‰) in the Cambrian to Triassic sedimentary strata. It suggests that reduced sulfur was derived from evaporate in sedimentary strata by thermo chemical sulfate reduction. Sulfides have low radiogenic Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.129–18.375, ²⁰⁷Pb/²⁰⁴Pb = 15.640–15.686 and ²⁰⁸Pb/²⁰⁴Pb = 38.220–38.577) that plot in the field between upper crust and the orogenic belt evolution curve in the plot of ²⁰⁷Pb/²⁰⁴Pb vs. ²⁰⁶Pb/²⁰⁴Pb, and similar to that of age corrected Proterozoic basement rocks (Dongchuan and Kunyang Groups). This indicates that ore-forming metals were mainly derived from basement rocks. Hydrothermal calcite yields a Sm–Nd isotopic age of 196 ± 13 Ma, possibly reflecting the timing of Pb–Zn mineralization in the SYG province, younger than the Permian Emeishan mantle plume (∼260 Ma). All data combined suggests that hydrothermal fluids circulated through basement rocks where they picked up metals and migrated to surface, mixed with reduced sulfur-bearing fluids and precipitated metals. Ore genesis of the Maozu deposit is different from known magmatic–hydrothermal, Sedimentary Exhalative or Mississippi Valley-types, which maybe represent a unique ore deposit type, named as the SYG-type.     

The origin of the Dapingzhang volcanogenic Cu–Pb–Zn ore deposit,Yunnan province,SW China: Constraints from host rock geochemistry and ore Os–Pb–S–C–O–H isotopes

The Dapingzhang volcanogenic Cu–Pb–Zn sulfide deposit is located in the Lancangjiang tectonic zone within the Sanjiang region, Yunnan province of southwestern China. The deposit occurs within a felsic volcanic dome belonging to a mid-Silurian volcanic belt stretching for more than 100 km from Dapingzhang to Sandashan. The mineralized volcanic rocks are predominantly keratophyre and quartz keratophyre with subordinate spilite. The Dapingzhang deposit is characterized by well-developed vertical zonation with stockwork ores in the bottom, disseminated sulfide ores in the middle, and massive sulfide ores in the top, overlain by a thin layer of chemical sedimentary exhalative rocks (chert and barite). The Re–Os age of the pyrites from the deposit is 417 ± 23 Ma, indistinguishable from the age of the associated felsic volcanic rocks. The associated felsic volcanic rocks are characterized by negative Nb–Ta anomalies and positive ε_Nd(t) values (+ 4.4–+6.5), similar to the coeval calc-alkaline volcanic rocks in the region. This observation supports the interpretation that the felsic volcanic rocks associated with the Dapingzhang deposit are the derivatives of arc basaltic magma by extensive fractional crystallization. The δ³⁴S values of the sulfides from the deposit vary from − 1.24 to + 4.32‰, indicating a predominantly magmatic source for the sulfur. The sulfides are also characterized by homogeneous and relatively low radiogenic Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.310–18.656, ²⁰⁷Pb/²⁰⁴Pb = 15.489–15.643 and ²⁰⁸Pb/²⁰⁴Pb = 37.811–38.662), similar to the Pb isotopic compositions of the associated volcanic rocks. The Pb isotopic data indicate that mantle-derived Pb is more prevalent than crust-derived Pb in the deposit. The S–Pb isotopic data indicate that the important ore-forming materials were mainly derived from the associated volcanic rocks. The δ¹³C_PDB and δ¹⁸O_SMOW values of the associated hydrothermal calcite crystals vary from − 2.3‰ to + 0.27‰ and from + 14.6 to + 24.4‰, respectively. These values are between the mantle and marine carbonate values. The narrow range of the δ¹³C_PDB values for the calcite indicates that carbon-bearing species in the hydrothermal fluids were primarily derived from marine carbonates. The δ¹⁸O values for the hydrothermal fluids, calculated from the measured values for quartz, are between − 2.1‰ and + 3.5‰. The corresponding δD values for the fluids range from − 59‰ to − 84‰. The O–H isotopic data indicate mixing between magmatic fluids and seawater in the ore-forming hydrothermal system. Similar to a typical volcanogenic massive sulfide (VMS) deposit, the ore-forming fluids contained both magmatic fluids and heated seawater; the ore metals and regents were derived from the underlying magma as well as felsic country rocks.     

Geological and isotopic constraints on the origin of the Anle carbonate-hosted Zn–Pb deposit in northwestern Yunnan Province,SW China

The Anle Zn–Pb deposit, hosted by Upper Cambrian dolostone, is located in the southern Songpan–Ganzi Block in southwest China. In this deposit, ore bodies occur as stratiform lenses and consist of galena, sphalerite and pyrite as ore minerals, and quartz, dolomite and calcite as gangue minerals. The mineralization shows mainly vein, banded and brecciated structures. Four ore bodies have been found in the Anle deposit, with a combined 2.0 million tonnes (Mt) of sulfide ores at average grades of 1.64 wt.% Pb, 6.64 wt.% Zn and 45 g/t Ag. Brown, brownish-yellow and yellow sphalerite samples have δ⁶⁶Zn values ranging from + 0.08 to + 0.10‰ (average + 0.09‰, n = 3), + 0.12 to + 0.38‰ (average + 0.24‰, n = 8) and + 0.40 to + 0.50‰ (average + 0.46‰, n = 3), respectively. We interpret the progressively heavier Zn isotopes from brown to yellow sphalerite as being led by kinetic Raleigh fractional crystallization. Calcite samples have δ¹³C_PDB and δ¹⁸O_SMOW values ranging from − 4.8 to − 0.2‰ (average − 1.7‰, n = 7) and + 17.9 to + 21.4‰ (average + 19.6‰, n = 7), respectively. Whole-rock δ¹³C_PDB and δ¹⁸O_SMOW values of the Cambrian ore-hosting dolostone range from + 0.1 to + 1.1‰ (average + 0.6‰, n = 3) and + 23.2 to + 24.1‰ (average + 23.6‰, n = 3), respectively. This suggests that carbon in the ore-forming fluids was provided by the host dolostone through carbonate dissolution. δ³⁴S_CDT values of sulfide samples range between − 1.3‰ and + 17.8‰ with an average value of + 6.3‰ (n = 25), lower than evaporites (such as barite + 19.8‰) in the overlaying Lower Ordovician sedimentary strata. The data suggest that sulfur in the hydrothermal fluids were derived from evaporites by thermo-chemical sulfate reduction (TSR). ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios for sulfide minerals range from 17.63 to 17.86, 15.58 to 15.69 and 37.62 to 37.95, respectively. The data are similar to those of the age-corrected Cambrian ore-hosting dolostone (²⁰⁶Pb/²⁰⁴Pb = 17.70–17.98, ²⁰⁷Pb/²⁰⁴Pb = 15.58–15.65 and ²⁰⁸Pb/²⁰⁴Pb = 37.67–38.06), but lower than those of age-corrected Ordovician sandstone and slate (²⁰⁶Pb/²⁰⁴Pb = 18.54–19.58, ²⁰⁷Pb/²⁰⁴Pb = 15.73–15.81 and ²⁰⁸Pb/²⁰⁴Pb = 38.44–39.60). This indicates that ore Pb was most likely to be derived from the Cambrian ore-hosting dolostone. Therefore, our new geological and isotopic evidence suggests that the Anle Zn–Pb deposit is best classified to be an epigenetic carbonate-hosted Mississippi Valley-type (MVT) deposit.     

Fluid inclusions and H–O–S–Pb isotope systematics of the Chalukou giant porphyry Mo deposit,Heilongjiang Province,China

The Chalukou giant porphyry Mo deposit, located in the northern Great Xing'an Range, is the largest Mo deposit in the Xing'an–Mongolia orogenic belt. This deposit's ore bodies are mainly hosted in an intermediate–felsic complex and Jurassic volcanic sedimentary rocks, of which Late Jurassic granite porphyry, quartz porphyry and fine grained granite are closely associated with the Mo mineralization. Three types of fluid inclusions (FIs) are present in the quartz associated with oxide and sulphide minerals, i.e., liquid-rich two-phase, gas-rich two-phase and daughter mineral-bearing multiphase FIs. The FIs in the quartz phenocrysts of the granite porphyry contain liquid-rich two-phase, gas-rich two-phase and daughter mineral-bearing multiphase FIs. The homogenization temperatures vary from 230 °C to 440 °C and 470 °C to 510 °C, and their salinities vary from 0.7% to 53.7% NaCl eq. and 6.2% to 61.3% NaCl eq., respectively. The FIs of K-feldspar–quartz–magnetite veins of the early stage are composed of liquid-rich two-phase, gas-rich two-phase and daughter mineral-bearing multiphase FIs with homogenization temperatures and salinities of 320 °C to 440 °C and 4.2% to 52.3% NaCl eq., respectively. The FIs of quartz–molybdenite veins and breccia of the middle stage are composed of liquid-rich two-phase, gas-rich two-phase and daughter mineral-bearing multiphase FIs with homogenization temperatures and salinities of 260 °C to 410 °C and 0.4% to 52.3% NaCl eq., respectively. FIs of quartz–fluorite–galena–sphalerite veins of the late stage are liquid-rich two-phase FIs with homogenization temperatures and salinities of 170 °C to 320 °C and 0.5% to 11.1% NaCl eq., respectively. The ore-forming fluids of the Chalukou deposit are characterised by high temperature, high salinity and high oxygen fugacity, belonging to an F-rich H₂O–NaCl ± CO₂ system. The δ¹⁸O_W values vary from − 4.5‰ to 3.2‰, and the δD_W values vary from − 138‰ to − 122‰, indicating that the ore-forming fluids were a mixture of magmatic and meteoric water. The δ³⁴S values range from − 1.9‰ to + 3.6‰ with an average of + 1.6‰. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb values of the metallic minerals are in the ranges of 18.269–18.501, 15.524–15.567 and 38.079–38.264, respectively. Both the S and Pb isotopic systems indicate that the ore metals and fluids came primarily from a deep-seated magma source from the juvenile lower crust. The Mo mineralization in the Chalukou deposit occurred at a depth of 0.5 to 1.3 km, and multiple stages of phase separation or immiscibility of ore-forming fluid was critical for the formation of the Chalukou deposit.     

Genesis of the Huangshaping W–Mo–Cu–Pb–Zn polymetallic deposit in Southeastern Hunan Province,China: Constraints from fluid inclusions,trace elements,and isotopes

The Huangshaping polymetallic deposit is located in southeastern Hunan Province, China. It is a world-class W–Mo–Pb–Zn–Cu skarn deposit in the Nanling Range Metallogenic Belt, with estimated reserves of 74.31 Mt of W–Mo ore at 0.28% WO₃ and 0.07% Mo, 22.43 Mt of Pb–Zn ore at 3.6% Pb and 8.00% Zn, and 20.35 Mt of Cu ore at 1.12% Cu. The ore district is predominantly underlained by carbonate formations of the Lower Carboniferous period, with stocks of quartz porphyry, granite porphyry, and granophyre. Skarns occurred in contact zones between stocks and their carbonate wall rocks, which are spatially associated with the above-mentioned three types of ores (i.e., W–Mo, Pb–Zn, and Cu ores).Three types of fluid inclusions have been identified in the ores of the Huangshaping deposit: aqueous liquid–vapor inclusions (Type I), daughter-mineral-bearing aqueous inclusions (Type II), and H₂O–CO₂ inclusions (Type III). Systematic microthermometrical, laser Raman spectroscopic, and salinity analyses indicate that high-temperature and high-salinity immiscible magmatic fluid is responsible for the W–Mo mineralization, whereas low-temperature and low-salinity magmatic-meteoric mixed fluid is responsible for the subsequent Pb–Zn mineralization. Another magmatic fluid derived from deep-rooted magma is responsible for Cu mineralization.Chondrite-normalized rare earth element patterns and trace element features of calcites from W–Mo, Pb–Zn, and Cu ores are different from one another. Calcite from Cu ores is rich in heavy rare earth elements (187.4–190.5 ppm), Na (0.17%–0.19%), Bi (1.96–64.60 ppm), Y (113–135 ppm), and As (9.1–29.7 ppm), whereas calcite from W–Mo and Pb–Zn ores is rich in Mn (> 10.000 ppm) and Sr (178–248 ppm) with higher Sr/Y ratios (53.94–72.94). δ¹⁸O values also differ between W–Mo/Pb–Zn ores (δ¹⁸O = 8.10‰–8.41‰) and Cu ores (δ¹⁸O = 4.34‰–4.96‰), indicating that two sources of fluids were, respectively, involved in the W–Mo, Pb–Zn, and Cu mineralization.Sulfur isotopes from sulfides also reveal that the large variation (4‰–19‰) within the Huangshaping deposit is likely due to a magmatic sulfur source with a contribution of reduced sulfate sulfur host in the Carboniferous limestone/dolomite and more magmatic sulfur involved in the Cu mineralization than that in W–Mo and Pb–Zn mineralization. The lead isotopic data for sulfide (galena: ²⁰⁶Pb/²⁰⁴Pb = 18.48–19.19, ²⁰⁷/²⁰⁴Pb = 15.45–15.91, ²⁰⁸/²⁰⁴Pb = 38.95–39.78; sphalerite: ²⁰⁶Pb/²⁰⁴Pb = 18.54–19.03, ²⁰⁷/²⁰⁴Pb = 15.60–16.28, ²⁰⁸/²⁰⁴Pb = 38.62–40.27; molybdenite: ²⁰⁶Pb/²⁰⁴Pb = 18.45–19.21, ²⁰⁷/²⁰⁴Pb = 15.53–15.95, ²⁰⁸/²⁰⁴Pb = 38.77–39.58 chalcopyrite: ²⁰⁶Pb/²⁰⁴Pb = 18.67–19.38, ²⁰⁷/²⁰⁴Pb = 15.76–19.90, and ²⁰⁸/²⁰⁴Pb = 39.13–39.56) and oxide (scheelite: ²⁰⁶Pb/²⁰⁴Pb = 18.57–19.46, ²⁰⁷/²⁰⁴Pb = 15.71–15.77, ²⁰⁸/²⁰⁴Pb = 38.95–39.13) are different from those of the wall rock limestone (²⁰⁶Pb/²⁰⁴Pb = 18.34–18.60, ²⁰⁷/²⁰⁴Pb = 15.49–15.69, ²⁰⁸/²⁰⁴Pb = 38.57–38.88) and porphyries (²⁰⁶Pb/²⁰⁴Pb = 17.88–18.66, ²⁰⁷/²⁰⁴Pb = 15.59–15.69, ²⁰⁸/²⁰⁴Pb = 38.22–38.83), suggesting Pb²⁰⁶-, U²³⁸-, and Th ²³²-rich material are involved in the mineralization. The Sm–Nd isotopes of scheelite (ε_Nd(t) = − 6.1 to − 2.9), garnet (ε_Nd(t) = − 6.8 to − 6.1), and calcite (ε_Nd(t) = − 6.3) from W–Mo ores as well as calcite (ε_Nd(t) = − 5.4 to − 5.3) and scheelite (ε_Nd(t) = − 2.9) from the Cu ores demonstrate suggest more mantle-derived materials involved in the Cu mineralization.In the present study we conclude that two sources of ore-forming fluids were involved in production of the Huangshaping W–Mo–Pb–Zn–Cu deposit. One is associated with the granite porphyry magmas responsible for the W–Mo and then Pb–Zn mineralization during which its fluid evolved from magmatic immiscible to a magmatic–meteoritic mixing, and the other is derived from deep-rooted magma, which is related to Cu-related mineralization.     

贺兰山北段牛头沟金矿床成矿流体和成矿物质来源:来自H-O-S-Pb同位素的证据

贺兰山北段牛头沟金矿床为华北克拉通西北缘新发现的金矿床,包括构造破碎带蚀变岩型和石英脉型两种矿化类型,后者可进一步细分为低缓石英脉型和陡窄石英脉型2个亚类。矿区所有矿体均赋存在古元古界贺兰山群变质杂岩和混合花岗岩内,受主干断裂F_1及其上盘次级断裂体系控制。综合本文及前人研究成果表明,破碎带蚀变岩型石英流体包裹体以纯液相水溶液包裹体为主,而低缓石英脉型和陡窄石英脉型石英流体包裹体则以气液两相水溶液包裹体为主,不同矿化类型成矿流体均为中低温(160~210℃)、中低盐度(6%~12%NaCl_(eq))的H_2O-NaCl流体。对矿区内3种矿化类型石英流体包裹体和硫化物分别开展的H-O和S-Pb同位素研究显示:破碎带蚀变岩型和陡窄石英脉型流体包裹体δD_(H2O)组成相近,分别为-75.2‰~-89.3‰和-87.0‰~-93.8‰,而低缓石英脉型流体包裹体则具有较高的δD_(H2O)值(-45.7‰~-67.7‰);流体包裹体δ~(18)O_(H2O)值则由破碎带蚀变岩型(3.7‰~4.4‰)→低缓石英脉型(1.9‰~3.3‰)→陡窄石英脉型(0.5‰~0.9‰)依次降低。破碎带蚀变岩型和陡窄石英脉型δ~(34)S组成均为正值,分别为1.3‰~6.9‰和2.2‰~5.8‰,而低缓石英脉型则具有较低的δ~(34)S值(-5.1‰~-2.6‰)。低缓石英脉型金矿具有明显不同的δD_(H2O)和δ~(34)S组成,可能与含矿断裂性质及其距离导矿构造F_1断裂较远等因素所共同导致的成矿流体氧逸度升高有关。3种矿化类型对应的矿石均表现出明显富集Th放射成因Pb的特点,~(206)Pb/~(204)Pb(16.467~17.994)和~(207)Pb/~(204)Pb(15.382~15.582)组成相对均一,而~(208)Pb/~(204)Pb变化较大(37.413~42.345)。总体上,石英流体包裹体H-O同位素组成表明成矿流体均为岩浆水和大气降水形成的混合流体,其大气降水比例自破碎带蚀变岩型→低缓石英脉型→陡窄石英脉型依次升高;矿石S-Pb同位素指示成矿物质为深部岩浆和具有高Th/U比的基底围岩双重来源。结合区域构造–岩浆演化,笔者将牛头沟金矿床成矿过程概括为晚古生代裂陷盆地形成阶段、中晚侏罗世区域挤压推覆阶段和晚侏罗世至早白垩世岩浆热液活动阶段等3个阶段。