| Abstract: | The corporate purpose of Wismut GmbH is to decommission its former mining holdings and to rehabilitate the landscape and the environment. Sample taking and analysing the value of contaminants are necessary steps for the remediation of waste rock piles, the recycling of contaminated areas, controlled flooding of uranium mines. Main emphasis lies on the determination of heavy metals and radionuclides of natural decay chains of U‐238 and U‐235. Yearly about 60 000…70 000 determinations of radionuclides in waters were done. Facing this high output of determinations it is a permanent task for laboratory and quality management to ask: Are the results of different methods comparable to each other? Is there a preferred analytical technology? Which matrix influences exist? and What about the analytical costs? Answers to these important questions are given in this report. Summarizing our investigations done in the last few years it is possible to say that – by using different analytical methods the results of radionuclides in water samples (surface or groundwater) are comparable, – a not negligible influence of Ra‐223, Ra‐224 and Ra‐228 may exist by using the DIN 38404 C18 method to determine Ra‐226, – a preferred method cannot be defined, – the choice of the analytical method should include analytical questions (the sample matrix, the occurrence of other disturbing radionuclides, the necessary detection limit) and economical questions (costs, other parameters to be determined). |
