Elimination of Swimming Pool Water Disinfection By‐products with Advanced Oxidation Processes (AOPs)

Ozonation is a treatment step which was first applied in the 1960s in pool water treatment for disinfection as well as for oxidation of pool water contaminants. Contact time between ozone and pool water was identified to be of significance with an increased elimination efficiency regarding chloramines, trihalogenmethane formation potential and the permanganate index for longer reaction times. Oxidation via OH radicals might be the dominating pathway. In this study ozonation was compared with the ozone based advanced oxidation processes ozone/UV and ozone/hydrogen peroxide regarding the elimination efficiency of both disinfection by‐products (DBPs) and DBP precursors. It was observed that AOPs in comparison to ozonation showed an increased elimination efficiency regarding total organic carbon (TOC), the organically bound halogens adsorbable on activated carbon (AOX) and AOX formation potential. A contact time of 3 minutes between pool water and oxidant turned out to be practically sufficient. Just for the trihalomethane (THM) formation potential ozonation showed a slight advantage compared to the AOPs because ozonation is a highly selective oxidant and OH radical reactions are known to produce small reactive molecules which are easier transformed to THMs. Combination of membrane filtration and AOPs resulted in an elimination of 10 to 90 % of the DBPs and their precursors. The ozone/hydrogen peroxide process is suggested for pool water treatment because of the higher elimination rates compared to ozonation and of economic reasons compared to the ozone/UV process.