Surveillance of Invasive Bacterial Pathogens and Human Enteric Viruses in Wastewater Final Effluents and Receiving Water Bodies – a Case Study from Durban,South Africa

The physico‐chemical characteristics and microbial composition of the final effluents of two municipal wastewater treatment plants in South Africa were assessed between July and September 2009. The impact of the treated final effluents on the receiving water bodies was also evaluated. The temperature across all sampling points ranged between 14 and 22°C, while pH varied from 6.9 to 7.6. High levels of turbidity, chemical oxygen demand (COD), ammonia, nitrate, nitrite and orthophosphate (PO₄) were observed in many cases. Turbidity of the samples was in the range of 2.2–288.6 NTU. The concentrations (mg/L) of other physico‐chemical parameters are as follows: COD (9.33–289); ammonia (0.000340–45.4); nitrate (0.062–539); nitrite (0.021–22.6); PO₄ (5.3–33.2). The microbial quality of the effluents discharged from the plants did not comply with the limits set by the South African guidelines with respect to pathogens such as Salmonella, Shigella, Escherichia coli, total coliform, faecal coliform, enterococci, faecal streptococci, and viral particles for effluents intended for discharge into receiving watersheds. This study revealed an undesirable impact on the physico‐chemical and microbial qualities of the receiving water bodies as a result of the discharge of inadequately treated effluents from the wastewater treatment facilities. This poses a health risk to several rural communities which rely on the receiving water bodies primarily as their sources of domestic water and recreational purposes. There is therefore a need for the intervention of appropriate regulatory agencies in South Africa to ensure compliance of treatment facilities with wastewater effluent quality standards.