A Study: Removal of Cu(II), Cd(II), and Pb(II) Ions from Real Industrial Water and Contaminated Water Using Activated Sludge Biomass

This study aims to remove of Cu²⁺, Cd²⁺, and Pb²⁺ ions from solution and to investigate the adsorption isotherms, adsorption kinetics, and ion‐exchange affinities of these metals using waste activated sludge (AS) biomass. The adsorptions of the metals on biomass were optimal at an acidic pH value of 6.0 based on its monolayer capacities. Maximum monolayer capacities of AS biomass (q_max) were calculated as 0.478, 0.358, and 0.280 mmol g^?1 for Cu²⁺, Cd²⁺, and Pb²⁺, respectively, and the adsorption equilibrium time was found as 60 min for each metal. The adsorbed amount of metal rose with increasing of initial metal ion concentration. The equilibrium adsorption capacity of AS for initial 0.25 mmol L^?1 metal concentration was determined as 0.200, 0.167, and 0.155 mmol g^?1 for Cu²⁺, Cd²⁺, and Pb²⁺ ions, respectively. These relevant values were determined as 0.420, 0.305, and 0.282 mmol g^?1 for Cu²⁺, Cd²⁺, and Pb²⁺ ions, respectively, when initial metal concentration was 0.50 mmol L^?1. In the multi‐metal sorption system, the adsorption capacity of AS biomass was observed in the order of Cu²⁺ > Cd²⁺ > Pb²⁺. In the presence of 100 mmol L^?1 H⁺ ion, the order of ion‐exchange affinity with H⁺ was found as Cu²⁺ > Cd²⁺ > Pb²⁺. The adsorption kinetics were also found to be well described by the pseudo‐second‐order and intraparticle diffusion models. Two different rate constants were obtained as k_i1 and k_i2 and k_i1 (first stage) was found to be higher than k_i2 (second stage).