Flash flood hazard mapping based on quantitative hydrology,geomorphology and GIS techniques (case study of Wadi Al Lith,Saudi Arabia)

Flash floods are considered as catastrophic phenomena possessing major hazardous threat to the coastal cities, towns, villages and infrastructures. This study deals with the evaluation of flash flood hazard in the ungauged Wadi Al Lith basin depending on detailed morphometric characteristics of Al Lith basin and its sub-basins. For the detailed study, ASTER data were used for preparing digital elevation model (DEM), and geographical information system (GIS) was used in the evaluation of linear, areal and relief aspects of morphometric parameters. The major parameters such as watershed boundary, flow accumulation, flow direction, flow length and stream ordering are prepared using the ArcHydro Tool. Surface Tool in ArcGIS-10 software, and ASTER (DEM) was used to create different thematic maps such as DEM, contour, slope aspect and hill shade maps. Twenty-five morphometric parameters were measured, calculated and interlinked to produce nine effective parameters for evaluation of the flash flood hazard degree of the study area. Based on nine morphometric parameters which affect the hydrologic behaviour of the Wadi, by influence on time of concentration which has a direct influence on flooding prone area. The flash flood hazard of the Al Lith basin and its sub-basins was identified and classified into three groups (high, medium and low hazard degree). The study provides details on the flash flood-prone area (Wadi Al Lith) and the mitigation measures. This study also helps to plan rainwater harvesting and watershed management in the flash flood alert zones.