Crustal scattering at the KTB from a combined microearthquake and receiver analysis

In December of 1994 a fluid injection experiment which triggered several hundreds of microearthquakes was conducted at the KTB main borehole (Oberpfalz, Germany). These events were recorded with a temporal seismic network at the surface. Out of the complete data set, a cluster of five events recorded at four mini-arrays consisting of eight or nine stations was used to investigate the crustal scattering properties in the vicinity of the KTB. For this purpose, the 'Double Beam Method' (DBM; Krüger et al . 1993 , 1995 , 1996) and the 'Double Beam Imaging Method' (Scherbaum, Krüger & Weber 1997) were extended to curved wave fronts to drop the restriction of plane-wave propagation. This technique is used for imaging the crustal scattering strength using earthquake clusters recorded at close-by mini-arrays. The results of the array analysis show that the composition of the P coda is mainly affected by the site location of the arrays. Near-surface and deeper crustal scattering contribute in a very complicated pattern. Furthermore, with the present data set it was possible to identify reflections from the top of the Erbendorf Body. This is a very pronounced arrival in most of the recorded traces. In one of the arrays its amplitudes are even greater than the direct P phases. Five to eight coherent phases could be identified by the mini-arrays. Using only these phases, synthetic P -coda traces were constructed, which only contain the coherent part of the observed wavefield. By subtracting the synthetic coherent wavefield from the original traces we achieve a variance reduction in the P coda of up to 37 per cent. This leads to the conclusion that a large amount of the P coda at the KTB can be modelled by a simple deterministic single-scattering model using a small number of individual scatterers.