Kiglapait geochemistry V: Strontium

The Kiglapait intrusion contains 330 ppm Sr and has $\text{Sr}\text{Ca}\text{= 5 × 10}{}^{\mathrm{?3}}$ and $\text{Rb}\text{Sr}\text{= 3 × 10}{}^{\mathrm{?3}}$, as determined by summation over the Layered Group of the intrusion. Wholerocks in the Lower Zone contain 403 F_L^0.141 ppm Sr, where F_L is the fraction of liquid remaining; Sr drops to 180 ppm at the peak of augite production (F_L = 0.11) and rises to a maximum of 430 ppm in the Upper Zone before decreasing to 172 ppm at the end of crystallization. Feldspars in the Lower Zone contain 532 F_L^0.090 ppm Sr, increasing to 680 ppm in the Upper Zone before decreasing to 310 ppm at the end. Clinopyroxenes contain 15 to 30 ppm Sr and have a mineral-melt distribution coefficient D = 0.06 except near the top of the intrusion where D = 0.10.The calculated feldspar-liquid distribution coefficient has an average value near 1.75 but shows four distinct trends when plotted against X_An of feldspar. The first two of these are strongly correlated with the modal augite content of the liquid, on average by the relation D = 1.4 + 0.02 Aug^L. The third (decreasing) trend is due to co-crystallization of apatite, and the fourth (increasing) trend can best be attributed to a triclinic-monoclinic symmetry change in the feldspar at An₂₆, 1030°C. The compound feldspar-liquid distribution coefficient K_D for $\text{Sr}\text{Ca}$ bears out these deductions in detail and yields ΔG_r for the Sr-Ca exchange ranging from nearly zero at the base of the Lower Zone to ?26 kJ/gramatom at the end of crystallization. The compound feldspar-liquid distribution coefficient K_D for $\text{Rb}\text{Sr}$ varies from 0.3 in the Lower Zone to 1.1 at the end of crystallization.The ratio $\text{Ca}{}^{\mathrm{F}}\text{Ca}{}^{\mathrm{L}}$ is about 1.45 for troctolitic liquids containing 5% augite, for which K_D (Sr-Ca) = 1.0 and D_Ca = D_Sr. For common basaltic liquids containing 20% augite, the Kiglapait data predict $\text{solSr}{}^{\mathrm{F}}\text{Sr}{}^{\mathrm{L}}\text{= 1.8}$, as commonly found elsewhere. The strong dependence of D_sr on augite content of the liquid illuminates the role of liquid composition and structure in determining the feldspar-liquid distribution coefficient. Conversely, a discontinuous change in the trend of D_Sr when apatite arrives shows that the effect is due to apatite crystallization itself, not to the continuous variation of the liquid as it becomes enriched in apatite component.