Water flooding of the Oseberg Øst oil field,Norwegian North Sea: Application of formation water chemistry and isotopic composition for production monitoring

This case study demonstrates how natural heterogeneities of formation and injection waters can be applied to a number of production related applications, extending into the mature life of a reservoir. Break-through of injection water, identification and characterisation of production intervals and evaluation of responses to operational events are some of the possible applications during production.The Oseberg Øst oil field in the North Sea represents a complex situation with commingled production from all Brent Group formations. The Sr isotope composition is an excellent parameter for defining the natural baseline of formation water, with a good spatial resolution and vertical stratification. Aquifer water from the Utsira Formation is injected for pressure support, and reinjection of produced water has also been applied since the onset of water production. Utsira Formation water has high Mg, low Ba and low Sr content compared to the reservoir formation waters. Isotopic compositions (δD and ⁸⁷Sr/⁸⁶Sr) are also distinct. A non-reactive behaviour of Ba and Sr is verified from binary cross-plots and geochemical modelling. Break-through of injection water could be identified in five production wells based on Ba/Mg ratios. In one of the reservoir compartments (Beta Saddle), water injection points were changed after approximately three years. The Ba/Mg ratio could also identify the second injection water break-through in one of the wells due to an intermediate period of higher formation water content. Since the Sr content in the Utsira water is low, the ⁸⁷Sr/⁸⁶Sr ratio is a good natural tracer for formation water movements even at high ratios of injected water. In particular, the vertical stratification of ⁸⁷Sr/⁸⁶Sr is useful for quantifying production from different intervals in commingled wells. A methodology for using operational events, such as production allocations or shut-ins, for characterisation of production zones is discussed.