A numerical investigation on height anomaly prediction in mountainous areas

This paper provides numerical examples for the prediction of height anomalies by the solution of Molodensky's boundary value problem. Computations are done within two areas in the Canadian Rockies. The data used are on a grid with various grid spacings from 100 m to 5 arc-minutes. Numerical results indicate that the Bouguer or the topographicisostatic gravity anomalies should be used in gravity interpolation. It is feasible to predict height anomalies in mountainous areas with an accuracy of 10 cm (1) if sufficiently dense data grids are used. After removing the systematic bias, the differences between the geoid undulations converted from height anomalies and those derived from GPS/levelling on 50 benchmarks is 12 cm (1) when the grid spacing is 1km, and 50 cm (1) when the grid spacing is 5. It is not necessary, in most cases, to require a grid spacing finer than 1 km, because the height anomaly changes only by 3 cm (1) when the grid spacing is increased from 100 m to 1000 m. Numerical results also indicate that, only the first two terms of the Molodensky series have to be evaluated in all but the extreme cases, since the contributions of the higher order terms are negligible compared to the objective accuracy.