Empirical Correlations for Predicting Strength Properties of Rocks from P-Wave Velocity Under Different Degrees of Saturation

Determination of P-wave velocity (V _p), which is closely related to intact rock properties both in laboratory and in situ conditions, is a non-destructive, easy and less complicated procedure. Due to these advantages, there is an increasing trend to predict the physico-mechanical properties of rocks from V _p. By considering that no attempt on the estimation of mechanical properties of rocks from V _p under different degrees of saturation has been made, in this study, it was aimed to correlate strength properties (uniaxial compressive and tensile strengths) with V _p of various rock types under different degrees of saturation. For this purpose, fourteen different rock types were collected from several parts of Turkey and a comprehensive laboratory testing program was conducted. Experimental results indicated that strength and deformability properties of the rocks decreased with increasing degree of saturation, while V _p showed increasing and decreasing trends depending on degree of saturation. Simple regression analysis results indicated that although prediction of the strength properties of rocks directly from V _p at different degrees of saturation was possible, the equations developed would yield some under- or over-predictions. In the second stage of statistical analyses, a series of different prediction relationships were developed by using independent variables such as V _p, degree of saturation and effective clay content (ECC). The statistical tests suggested that the resultant multivariate equations had very high prediction performances and were very useful tools to estimate the strength properties from V _p determined at any degree of saturation. In addition, the comparisons between the theoretical Gassmann–Biot velocities, which were calculated at different degrees of saturation, and the experimental results suggest that the theoretical Gassmann–Biot velocities show inconsistencies with the experimental results obtained from the investigated rock types with high ECC. Therefore, it was concluded that the use of theoretical velocities is not suitable for rock types with high ECC.