Borehole Stability Analysis of Horizontal Drilling in Shale Gas Reservoirs

Serious wellbore instability occurs frequently during horizontal drilling in shale gas reservoirs. The conventional forecast model of in situ stresses is not suitable for wellbore stability analysis in laminated shale gas formations because of the inhomogeneous mechanical properties of shale. In this study, a new prediction method is developed to calculate the in situ stresses in shale formations. The pore pressure near the borehole is heterogeneous along both the radial and tangential directions due to the inhomogeneity in the mechanical properties and permeability. Therefore, the stress state around the wellbore will vary with time after the formation is drained. Besides, based on the experimental results, a failure criterion is verified and applied to determine the strength of Silurian shale in the Sichuan Basin, including the long-term strength of gas shale. Based on this work, horizontal well borehole stability is analyzed by the new in situ stress prediction model. Finally, the results show that the collapse pressure will be underestimated if the conventional model is used in shale gas reservoirs improperly. The collapse pressure of a horizontal well is maximum at dip angle of 45°. The critical mud weight should be increased constantly to prevent borehole collapse if the borehole is exposed for some time.