| Abstract: | The objective of the paper is to derive the strength and modulus properties of rockmass as a function of intact rock strength and joint factor. The joint factor reflects the combined effect of joint frequency, joint inclination and joint strength. A study for the strength and deformation characteristics of jointed rock is done by conducting standard laboratory tests on cylindrical specimens of plaster of Paris after introducing artificial joints. The specimens having one to four joints at different inclinations which vary from 0° to 90° were tested at different confining conditions. The test results were examined to understand the effect of joint frequency and joint inclination on the strength and deformation behaviour of rock mass. Empirical correlations were developed for prediction of the uniaxial compressive strength and elastic modulus of jointed rocks. Results are compared with the earlier work on jointed specimens covering a wide variety of rocks. So, knowing the intact rock properties and the joint factor, the jointed rock properties can be estimated. These relations can be used for developing an equivalent continuum model for rock mass for handling boundary value problems. A failure criterion as proposed by Ramamurthy (1993 Ramamurthy, T. 1993. “Strength and modulus response of anisotropic rocks”. In Comprehensive rock engineering, Edited by: Hudson, J.A. Vol. 1, 313–329. Oxford: Pergamon Press. Google Scholar]) has been validated from these experimental results. |
