Studies using an airborne laser altimeter to measure landscape properties |
| |
Authors: | JERRY C RITCHIE THOMAS J JACKSON JURGEN D GARBRECHT EARL H GRISSINGER JOSEPH B MURPHEY JAMES H EVERITT |
| |
Institution: | 1. USDA-ARS, Hydrology Laboratory , Beltsville, Maryland , 20705 , USA;2. USDA-ARS, National Agricultural Water Quality Laboratory , Durant, Oklahoma , 74702 , USA;3. USDA-ARS, National Sedimentation Laboratory , Oxford , Mississippi , 38655 , USA;4. USDA-ARS, Remote Sensing Research Unit , Weslaco , Texas , 78596 , USA |
| |
Abstract: | Abstract Vertical surface properties of the landscape were measured using a laser altimeter mounted in a small twin-engine aeroplane. The laser altimeter makes 4000 measurements per second with a vertical recording precision of 0.05 m for a single measurement. These airborne laser measurements were analysed to provide information on topography, vegetation canopy and stream and gully cross-sections. Laser altimeter data were used to measure small (less than 0.20 m deep) and large gullies and stream cross-sections. Vegetation canopy heights, cover, structure and distribution were determined in studies in Texas and Arizona. Laser measurements of vegetation cover and height were significantly correlated with ground measurements made with line-intercept methods. While conventional ground-based techniques may be used to make all these measurements, airborne laser altimeter techniques allow the data to be collected in a quick and efficient way over large and inaccessible areas. The airborne laser altimeter data can also help quantify various land surface parameters needed for natural resource and landscape management or required by hydrological simulation models. Measurements of landscape properties over large areas provide a better understanding of landscape functions and can lead to the development of better management plans to conserve and improve the productivity of natural resources. |
| |
Keywords: | |
|
|