首页 | 本学科首页   官方微博 | 高级检索  
     检索      

革镇堡隧道破碎段动态施工的三维数值模拟
引用本文:金路,姜谙男,赵文,张娇.革镇堡隧道破碎段动态施工的三维数值模拟[J].岩土力学,2008,29(Z1):272-276.
作者姓名:金路  姜谙男  赵文  张娇
作者单位:1.东北大学 资源与土木工程学院,沈阳 110004;2.大连海事大学 交通与物流工程学院,大连 116026
摘    要:革镇堡隧道是辽宁省的重点建设工程,其中破碎段岩体地质条件复杂,传统方法不能很好地反映其力学行为。针对上述问题,在建立大规模的复杂地质结构的数值网格基础上,采用三维岩土工程软件FLAC3D,分别根据无支护、初次支护和二次支护3种情况,4 m一个步长,分为上下两台阶对该段隧道的分步动态施工过程进行了三维数值模拟。通过对位移场、应力场的演化情况和塑性区分布的模拟计算,分析了开挖支护动态过程的复杂力学行为。计算结果显示,位移与监测数据比较一致,现有的二次支护方案能够保证围岩的稳定性。数值模拟的结果对于该段隧道的施工具有指导意义。

关 键 词:隧道工程  开挖支护  破碎带  三维数值模拟  围岩稳定性  
收稿时间:2008-07-25

3D numerical simulation of dynamic construction of Gezhenpu tunnel with cataclastic section
JIN Lu,JIANG An-nan,ZHAO Wen,ZHANG Jiao.3D numerical simulation of dynamic construction of Gezhenpu tunnel with cataclastic section[J].Rock and Soil Mechanics,2008,29(Z1):272-276.
Authors:JIN Lu  JIANG An-nan  ZHAO Wen  ZHANG Jiao
Institution:1. School of Resources &Civil Engineering Northeastern University, Shenyang 110004, China; 2. Traffic and Logistics College Dalian Maritime University, Dalian 116026, China
Abstract:Gezhenpu tunnel is the vital construction project in Liaoning Province,its geoligical condition is complex,and there is cataclastic section exists,the conventional method can not reflect the mechanical behavior.Aiming at above problem,according to without supporting,primary supporting and secondary supporting,geotechnical engineering software FLAC3D is adopted;and large scale numerical grid is constructed,the 3D numerical simulation for dynamic construction process is carried out with 4 meters each step and...
Keywords:tunnel engineering  excavation and support  fracture zone  3D numerical simulation  stability of surrounding rock  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《岩土力学》浏览原始摘要信息
点击此处可从《岩土力学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号