首页 | 本学科首页   官方微博 | 高级检索  
     

黏土结构性对孔压静力触探结果的影响分析
引用本文:加瑞, 赵栋, 雷华阳. 黏土结构性对孔压静力触探结果的影响分析[J]. 水文地质工程地质, 2023, 50(5): 80-88. doi: 10.16030/j.cnki.issn.1000-3665.202209055
作者姓名:加瑞  赵栋  雷华阳
作者单位:1.天津大学建筑工程学院,天津 300350;; 2.天津大学滨海土木工程结构与安全教育部重点实验室,天津 300350
基金项目:天津市科技计划项目(21JCYBJC00380);国家自然科学基金重大项目(51890911)
摘    要:针对目前黏土结构性对孔压静力触探结果的影响及其机理尚不是很清楚的问题,首先在ABAQUS软件中对结构性剑桥模型进行了程序实现,然后建立了孔压静力触探贯入结构性黏土的数值模型,通过数值计算分析了黏土结构性对孔压静力触探结果的影响。数值计算结果表明:(1)黏土的结构性会导致锥尖周围土体的偏应力增大,由于锥尖附近土体的结构性损伤,最大偏应力出现在距锥尖一定距离的右下方;(2)表征结构性强度的参数——初始结构屈服应力$ p{text{'}}_{ {rm{yi}}} $越大,锥尖阻力qc越大,而表征结构性损伤速度的参数——结构性对流动法则影响参数ω越大,qc值越小;(3)$ptext{'}_{ {rm{yi}}} $值越大,贯入停止时的超静孔隙水压力u越大,而ω值越大,贯入停止时的u值越小;(4)经验圆锥系数Nkt随$ptext{'}_{ {rm{yi}}} $增大明显减小,随ω的增大略有减小。因此,黏土的结构性强度及其损伤会明显影响孔压静力触探的测量结果,基于锥尖阻力qc估算结构性黏土的不排水抗剪强度su时应采用考虑结构性影响的经验圆锥系数Nkt,否则将会低估结构性黏土的su。研究结果可为孔压静力触探结果的分析和应用提供参考。

关 键 词:黏土结构性   孔压静力触探   结构性剑桥模型   锥尖阻力   经验圆锥系数
收稿时间:2022-09-25
修稿时间:2022-11-21

An analysis of the influence of clay structure on piezocone penetration test results
JIA Rui, ZHAO Dong, LEI Huayang. An analysis of the influence of clay structure on piezocone penetration test results[J]. Hydrogeology & Engineering Geology, 2023, 50(5): 80-88. doi: 10.16030/j.cnki.issn.1000-3665.202209055
Authors:JIA Rui  ZHAO Dong  LEI Huayang
Affiliation:1.School of Civil Engineering, Tianjin University, Tianjin 300350, China;; 2.Key Laboratory of Coast Civil Structure Safety of Ministry of Education, Tianjin University, Tianjin 300350, China
Abstract:The effect of clay structure on the piezocone penetration test results and its mechanism are not very clear, the structured Cam-clay model is firstly program-implemented in the ABAQUS software. Then, the numerical model of piezocone penetration into structured clay is established, and the effect of clay structure on piezocone penetration test results is analyzed through numerical simulation. The numerical calculation results show that (1) the clay structure causes the increase of deviatoric stress of the soils surrounding the cone tip, and the maximum deviatoric stress appears at the lower right at some distance from the cone tip due to the structural damage of the soils near the cone tip. (2) The larger the parameter $ptext{'}_{ {rm{yi}}} $ representing structural strength is, the larger the cone tip resistance qc, and the larger the parameter w representing structural damage speed, the smaller the qc value. (3) The larger the $ptext{'}_{ {rm{yi}}} $ value is, the larger the excess pore water pressure u when the penetration stops, and the larger the w value is, the smaller the u value when the penetration stops. (4) The value of the empirical cone factor Nkt decreases obviously with the increasing $ptext{'}_{ {rm{yi}}} $, and decreases slightly with the increasing w . Therefore, the structural strength of clay and its damage will obviously affect the measurement results of the piezocone penetration test, and the empirical cone factor Nkt considering the structural effect should be used to estimate the undrained shear strength su of the structural clay based on the cone resistance qc, otherwise, the su of the structural clay will be underestimated. The research results can provide reference for the analysis and application of piezocone penetration test results.
Keywords:clay structure  piezocone penetration test  structured Cam-clay model  cone resistance  empirical cone factor
点击此处可从《水文地质工程地质》浏览原始摘要信息
点击此处可从《水文地质工程地质》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号