Phosphorus removal efficiency from wastewater under different loading conditions using sand biofilters augmented with biochar

Treated wastewater is a valuable resource, particularly in countries facing water shortage such as Jordan. Nevertheless, excess nutrients, especially phosphorus, may have detrimental impacts on receiving waterbodies. Treated wastewater in Jordan often exceeds the recommended levels set by the Jordanian Standards for wastewater reuse and discharge. Therefore, it is important to reduce phosphorus loads to acceptable levels before discharge. Biofiltration is a low-cost technology that has shown good potential for wastewater treatment. The performance of biofilters largely depends on the media used. In this study, local sand and sand augmented with biochar prepared from the olive oil processing waste (SBC) were used as filter media for phosphorus removal from clarified secondary treated wastewater. The two media types were tested under different hydraulic and phosphorus loading conditions to simulate shock, flooding, and inundation conditions. The results showed that sand media was more effective in removing phosphorus (90.8 ± 2.6%) than sand amended with biochar (83.3 ± 3.2%). Both media showed resilience under extreme loading conditions. Although phosphorus removal efficiency was negatively affected following the extreme loading events, the observed effects were temporary. The simulated inundation event further showed that the media was able to retain the adsorbed phosphorus. Furthermore, the phosphorus concentration in the effluent remained within the prescribed discharge guidelines at all times.