Horizontal hydraulic conductivity of shallow streambed sediments and comparison with the grain‐size analysis results

Streambed horizontal hydraulic conductivity (K_h) has a substantial role in controlling exchanges between stream water and groundwater. We propose a new approach for determining K_h of the shallow streambed sediments. Undisturbed sediment samples were collected using tubes that were horizontally driven into streambeds. The sediment columns were analysed using a permeameter test (PT) on site. This new test approach minimizes uncertainties due to vertical flow in the vicinity of test tube and stream stage fluctuations in the computation of the K_h values. Ninety‐eight PTs using the new approach were conducted at eight sites in four tributaries of the Platte River, east‐central Nebraska, USA. The K_h values were compared with the nondirectional hydraulic conductivity values (K_g) determined from 12 empirical grain‐size analysis methods. The grain‐size analysis methods used the same sediment samples as K_h tests. Only two methods, the Terzaghi and Shepherd methods, yielded K_g values close to the K_h values. Although the Sauerbrei method produced a value relatively closer to K_h than other nine grain‐size analysis methods, the values from this method were not as reliable as the methods of Terzaghi and Shepherd due to the inconsistent fluctuation of the average estimates at each of the test sites. The Zunker, Zamarin, Hazen, Beyer, and Kozeny methods overestimated K_h, while the Slichter, US Bureau of Reclamation (USBR), Harleman, and Alyamani and Sen methods underestimated K_h. Any of these specific grain‐size methods might yield good estimates of streambed K_h at some sites, but give poor estimates at other sites, indicating that the relationship between K_g and K_h is significantly site dependent in our study. Copyright © 2011 John Wiley & Sons, Ltd.