Occurrence of negative epsilon in seismic hazard analysis deaggregation,and its impact on target spectra computation

This paper investigates circumstances behind the occurrence of negative ε (the normalized difference between the spectral acceleration of a recorded ground motion and the median response predicted by a ground motion prediction equation) in probabilistic seismic hazard deaggregation. Negative ε values are of engineering interest because of their impact on the conditional mean spectrum (CMS), which is a proposed alternative to the uniform hazard spectrum (UHS) as a target spectrum for ground motion selection. In the case where target ε values from deaggregation are positive, the CMS calculation produces relatively lower response spectra than the UHS. Positive target ε values occur almost universally in active seismic regions at long return periods of engineering interest, but the possibility of negative target ε values is important because in the case of negative target ε, some relationships between the CMS and UHS would reverse. This paper describes the calculation of target ε, performs parametric studies to determine when negative ε values occur in deaggregation, and investigates the potential impact on target spectrum calculation and ground motion selection. The case studies indicate that special seismicity models and certain ground motion prediction equations have the most significant effect on ε values and a combination of these characteristics in Eastern North America creates the most likely situation for negative target ε to occur. CMS results are nonintuitive when the target ε is negative, but it is not clear that this is a common practical concern because negative target ε occurs only in well‐constrained areas. Copyright © 2011 John Wiley & Sons, Ltd.