Drainage Performance of Different Sizes Tire Chips used Alone and Mixed with Natural Aggregates as Leachate Drainage Layer Material |
| |
Authors: | M K Kaushik Arvind Kumar Ajay Bansal |
| |
Institution: | 1.Department of Civil Engineering,Dr. B. R. Ambedkar National Institute of Technology Jalandhar,Jalandhar,India;2.Department of Chemical Engineering,Dr. B. R. Ambedkar National Institute of Technology Jalandhar,Jalandhar,India |
| |
Abstract: | Results of compressibility and hydraulic conductivity testing performed under different levels of average vertical stress were used to determine the appropriate tire chips size (in particular aspect ratio) and tire chip—gravel random state mix combination. Proper sidewall treatment was provided to reduce side wall friction up to minimum level and constant head conditions were maintained with appropriate design flow rate. Results showed that tire chips (length 25 mm, aspect ratio 1) mixed with 40 mm gravel in the random state in mixing ratio of 3:1 (ds:dg) was observed to undergo minimum strain, maximum hydraulic conductivity and hence free drainage even under high vertical stress levels. By selecting tire chips of appropriate aspect ratio and optimum mix combination for the construction of drainage layer of MSW landfill leachate collection system lower strain response, higher hydraulic conductivity values and relatively free drainage even under anticipated higher vertical stress levels may be achieved. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|