Assessment of Sulfate Concentrations in Water Used During Chemical Stabilization and Its Potential Impact on Sulfate Induced Heave

The occurrence of sulfate-induced heave of roadways that were chemically stabilized with either lime or cement can require expensive road repairs. Previous research attributed the heave to the formation of an expansive mineral named ettringite. However, not all chemically stabilized soils will exhibit heave. The overall goal of this research was to determine if the sulfate concentration in water can contribute to, or even cause, sulfate induced heave. Two soils, one with a soluble sulfate level below 3000 mg/kg and one with >8000 mg/kg sulfate, were stabilized with either lime or cement and subjected to a capillary soak with distilled water or saturated sulfate water. The low sulfate soils did not swell above the accepted limit of 1.5 %. The high sulfate soils swelled significantly (p < 0.05) above accepted level regardless of the stabilizer used. Overall, stabilized soils subjected to a capillary soak with saturated sulfate water swelled more than soils soaked with distilled water. The results found in this study demonstrated that cement will increase the axial load capacity of the soil, but the soil will still have the potential to heave excessively if sulfate and aluminum are present above the stoichiometric requirements to from ettringite.