On the use of compliant fairings on conventional moorings |
| |
Authors: | Donald O. Hodgins |
| |
Affiliation: | Seaconsult Marine Research Ltd , Vancouver, B.C. |
| |
Abstract: | Abstract Compliant fairing made of plastic ribbons or flexible rubber filaments can be attached to the cables of taut‐line moorings to reduce the drag force of the currents. The efficiency of such fairing depends upon its orientation in the flow and the Reynolds number of the cable. Results of using filament fairing manufactured by ENDECO Inc. on a 337‐m long mooring in the mouth of Hudson Strait are discussed. The fairing was found to be detrimental in this application because of twisting of the wire rope, producing a “bottle‐brush” configuration, and because the normal drag coefficient Cd ? 2.5 ± 0.45 was found to exceed that of a bare cable by 65 per cent on average. The Reynolds number range for this drag coefficient was 2.6 × 103 to 4.2 × 103 and was determined by force measurements in a flume. It is concluded that the problems of correctly orienting the fairing in the flow, and the true drag coefficient for Reynolds numbers less than about 5 × 104 must be carefully addressed in the design of conventional taut‐line moorings. Drag coefficients found in this study imply that compliant fairings would not be warranted for Reynolds numbers below about 5 × 104 unless strumming was expected for bare cables. |
| |
Keywords: | |
|
|