首页 | 本学科首页   官方微博 | 高级检索  
     


Corrosion Mechanism of 5083 Aluminum Alloy in Seawater Containing Phosphate
Affiliation:The Key Laboratory of Marine Chemistry Theory and Technology, Ministry of Education, College of Chemistryand Chemical Engineering, Ocean University of China, Qingdao 266100, China;State Key Laboratory for Marine Corrosion and Protection, Luoyang Ship Material Research Institute (LSMRI), Qingdao 266237, China
Abstract:As a material with good corrosion resistance,5083 aluminum alloy has a great application prospect in marine environment.In this work,the corrosion characteristics of 5083 aluminum alloy in seawater containing phosphate were investigated with Potentiodynamic Polarization,Electrochemical Impedance Spectroscopy (EIS),Scanning Electron Microscope (SEM),Energy Dispersive Spectroscopy Analysis (EDSA),X-ray Photoelectron Spectroscopy (XPS) and Laser Confocal Microscope.The results indicated that the effects of phosphate in seawater were two-fold.Firstly,phosphate slightly accelerated the corrosion of 5083 in seawater in the early stage of corrosion.HPO_4~(2-)competed with OH~-in the adsorption process on the alloy surface,which weakened the contact between OH~-and Al~(3+)near the interface of the alloy,and inhibited the formation as well as the self-repair of the passive film,thus accelerating the activation dissolution process.Compared with the natural seawater,the charge transfer resistance of 5083 in the seawater containing phosphate decreased faster during the early stage of corrosion,and the corrosion current density i_(corr) was higher in seawater containing phosphate.On the other hand,the addition of phosphate would not affect the cluster distribution of the second phase of 5083 in seawater,but it changed the composition of the corrosion product layer and had an obvious inhibitory effect on the local corrosion of 5083 in seawater.After 16-day exposure,shallower and more sparsely distributed pits could be observed on the derusted surface of 5083 in the seawater containing phosphate,and the pitting coefficient in the seawater containing phosphate was significantly lower than that in natural seawater.The reduction of pitting tendency could be realized mainly through two ways.First,the HPO_4~(2-)adsorbed on the surface of the passive film in the early stage of corrosion and repeled the corrosive anions such as Cl~-.Second,phosphate participated in the construction of the Ca HPO_4 precipitation film,which acted as a barrier and protection.
Keywords:
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号