| Abstract: | Soil-gas sampling and analysis is a common tool used in vapor intrusion assessments; however, sample collection becomes more difficult in fine-grained, low-permeability soils because of limitations on the flow rate that can be sustained during purging and sampling. This affects the time required to extract sufficient volume to satisfy purging and sampling requirements. The soil-gas probe tubing or pipe and sandpack around the probe screen should generally be purged prior to sampling. After purging, additional soil gas must be extracted for chemical analysis, which may include field screening, laboratory analysis, occasional duplicate samples, or analysis for more than one analytical method (e.g., volatile organic compounds and semivolatile organic compounds). At present, most regulatory guidance documents do not distinguish between soil-gas sampling methods that are appropriate for high- or low-permeability soils. This paper discusses permeability influences on soil-gas sample collection and reports data from a case study involving soil-gas sampling from silt and clay-rich soils with moderate to extremely low gas permeability to identify a sampling approach that yields reproducible samples with data quality appropriate for vapor intrusion investigations for a wide range of gas-permeability conditions. |
