首页 | 本学科首页   官方微博 | 高级检索  
     

某倾倒边坡开挖下的变形特征及加固措施分析
引用本文:黄润秋, 唐世强. 某倾倒边坡开挖下的变形特征及加固措施分析[J]. 水文地质工程地质, 2007, (6): 49-54. doi: 10.3969/j.issn.1000-3665.2007.06.012
作者姓名:黄润秋  唐世强
作者单位:成都理工大学地质灾害防治与地质环境保护重点实验室,成都,610059;; 成都理工大学
基金项目:国家自然科学基金雅砻江水电开发联合研究基金重点项目
摘    要:以皖南某高速公路一个反倾边坡为例,在详细地质调查基础上分析了边坡以倾倒-滑移为主要特征的倾倒变形力学机理.调查结果显示在边坡原有倾倒变形的基础上,开挖爆破等工程扰动首先使开挖面顶部出现倾倒变形并伴有后缘拉裂隙,同时坡体内部断续结构面逐渐贯通,最下级台阶面出现外鼓等.上述现象的出现显示出边坡具有整体失稳破坏的趋势.在上述地质概念模型基础上,应用离散单元法对边坡变形全过程进行模拟,验证上述变形破坏机理,并揭示了边坡在深度方向上的变形分区现象,即倾倒-折断区、强烈倾倒区、倾倒影响区和正常岩层区.

关 键 词:倾倒变形   开挖边坡   倾倒-滑移   变形分区   治理措施
文章编号:1000-3665(2007)06-0049-06
修稿时间:2007-03-21

On the deformation characteristics and reinforcement measures of a toppling slope under excavation
HUANG Run-qiu, TANG Shi-qiang. On the deformation characteristics and reinforcement measures of a toppling slope under excavation[J]. Hydrogeology & Engineering Geology, 2007, (6): 49-54. doi: 10.3969/j.issn.1000-3665.2007.06.012
Authors:HUANG Run-qiu  TANG Shi-qiang
Affiliation:State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology, Chengdu 610059, China
Abstract:Based on geologic investigation on an anti-dip slope of an expressway in southern Anhui Province,the mechanism of toppling deformation was analyzed for the slope characterized by toppling-sliding deformation.The evidences showed that toppling deformation firstly happened on the top of the excavated surface with tensile cracks,which arose from excavation disturbance and developed along the old toppling deformation patterns.Meanwhile,inner discontinuities were connected together step by step,and the lowest part of the slope swelled outwards.The whole slope showed a tendency of toppling-sliding failure.According to the above geologic conceptual model,the whole deformation process of the slope was simulated with discrete element method,which reappeared the phenomena and mechanism mentioned above.It also reveals that the deformation can be divided into four zones,that is,toppling-fracturing zone,intense toppling zone,toppling influencing zone and normal rock zone.Countermeasures were made according to above model and the results of numerical simulation.
Keywords:toppling deformation  cutting slope  toppling-sliding  deformation division  control measures
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《水文地质工程地质》浏览原始摘要信息
点击此处可从《水文地质工程地质》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号