首页 | 本学科首页   官方微博 | 高级检索  
     

节理岩体圆形隧道滑动区的研究
引用本文:周小平,张永兴,王建华. 节理岩体圆形隧道滑动区的研究[J]. 岩土力学, 2004, 25(Z2): 139-143
作者姓名:周小平  张永兴  王建华
作者单位:1. 重庆大学,土木工程学院,重庆,400045
2. 上海交通大学,建筑工程与力学学院,上海,200030
摘    要:对于连续介质问题,可以利用Mohr-Coulomb准则很好地解决圆形隧道滑动区问题.但是对于节理岩体问题要复杂得多.由于节理岩体具有复杂的力学特性,因此节理岩体圆形隧道滑动区的确定问题一直都没有很好地解决.节理岩体的力学特性可以很好地用考虑了中间主应力影响的非线性统一强度准则来表达.根据非线性统一强度准则确定了即时摩擦角,进而获得了节理岩体圆形隧道滑动区和支护应力的封闭形式的理论解,并给出了算例.

关 键 词:节理岩体  非线性统一强度准则  圆形隧道  滑动区
文章编号:1000-7598-(2004)增-0139-05
修稿时间:2004-04-30

Study on slip zones around circular cavities on crack-weakened rock masses based on nonlinear unified strength criterion
ZHOU Xiao-ping,ZHANG Yong-xing,Wang Jian-hua. Study on slip zones around circular cavities on crack-weakened rock masses based on nonlinear unified strength criterion[J]. Rock and Soil Mechanics, 2004, 25(Z2): 139-143
Authors:ZHOU Xiao-ping  ZHANG Yong-xing  Wang Jian-hua
Affiliation:ZHOU Xiao-ping1,ZHANG Yong-xing1,Wang Jian-hua2
Abstract:The jointed rock mass possesses complex mechanical behaviors, the slip zones around circular openings on jointed rock masses has not been studied in detail from a theoretical point of view. An analytic expression has been developed that enables the shear strength to be determined using the nonlinear strength criterion which takes influence of intermediate principal stress on the yield and failure of jointed rock masses into account. The important concept of instantaneous friction angle is defined. This paper presents the theory to estimate the region of joint effect around circular openings located in crack-weakened rock masses based on nonlinear unified strength criterion. An approximate procedure to determine support pressure is established. Several results are given. Results show that the properties of jointed rock masses and intermediate principal stress importantly affect the slip zones around circular openings on jointed rock masses. Magnitude of the slip zones around circular cavities increases with the decrease of the intermediate stress parameter.
Keywords:crack-weakened rock masses  nonlinear unified strength criterion  slip zones   circular openings
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号