Partitioning of heavy metals on soil samples from column tests

In this study, column tests were used to determine the retention capability of three types of estuarine alluvia collected adjacent to landfill sites in South Wales. Selective sequential extraction (SSE) was used to study the retention mechanisms of heavy metals in the soil columns obtained from leaching experiments. Acid digestion was later used to check the validity of the SSE results. Breakthrough curves show good retention of heavy metal ions (Pb, Cu, and Zn) by all soils, where almost 99% of heavy metals were retained with the C_e/C_o values in the order of 10^?3. The retention strength of these soils was observed to be constant up to five pore volumes (PV). This corresponds with the pH of the effluents and pore water of soil slices, which also show good buffering capacity against very acidic leachate up to 5PV. The heavy metal extraction profiles from SSE show very similar trends with the retention profiles from the leaching experiments, where heavy metals were retained mainly at the top part where the leachate entered the column. SSE indicates qualitatively that heavy metals precipitated with carbonates and amorphous materials (oxides/hydroxides) are higher than heavy metal retention via exchangeable mechanisms. The mass balance calculation gives range of deviation of 1–16% of the total soil extraction. The distribution of the heavy metals with various soil constituents are ranked in the following order: Carbonates>Amorphous oxides hydroxides>Organic matter>Exchangeable phases.