首页 | 本学科首页   官方微博 | 高级检索  
     

软土地区注浆成型螺纹桩抗拔承载力的计算
引用本文:赵 赟,张陈蓉,凌巧龙,黄茂松,胡玉银. 软土地区注浆成型螺纹桩抗拔承载力的计算[J]. 岩土力学, 2015, 36(Z1): 334-340. DOI: 10.16285/j.rsm.2015.S1.057
作者姓名:赵 赟  张陈蓉  凌巧龙  黄茂松  胡玉银
作者单位:1. 同济大学 地下建筑与工程系,上海 200092;2. 同济大学 岩土及地下工程教育部重点实验室,上海 200092;3. 上海建工集团股份有限公司,上海 200080
基金项目:上海市科委重点科技项目(No.11231202000)
摘    要:注浆成型螺纹桩采用后注浆技术形成桩侧螺纹,有利于在软土地区施工,目前已开始应用。基于螺纹桩上拔过程中螺牙附近土体的应力条件改变,采用摩尔应力圆分析螺牙附近破坏滑裂面的开展,得到了螺牙间距与螺牙突出尺寸的比值与滑裂面展开角之间的关系,给出了螺牙间土体从圆柱形滑裂面破坏向圆台形滑裂面破坏的判别条件。根据滑裂面的开展,将螺纹桩的抗拔承载力计算分为3种情况,采用极限平衡法得到了相应的螺纹桩抗拔承载力计算公式。最后,通过与有限元数值模拟以及实际工程算例对比,验证了文中方法的合理性。

关 键 词:螺纹桩  抗拔承载力  摩尔应力圆  滑裂面  
收稿时间:2015-03-09

Calculation of uplift capacity of grouting-screw pile in soft clay area
ZHAO Yun,ZHANG Chen-rong,LING Qiao-long,HUANG Mao-song,HU Yu-yin. Calculation of uplift capacity of grouting-screw pile in soft clay area[J]. Rock and Soil Mechanics, 2015, 36(Z1): 334-340. DOI: 10.16285/j.rsm.2015.S1.057
Authors:ZHAO Yun  ZHANG Chen-rong  LING Qiao-long  HUANG Mao-song  HU Yu-yin
Affiliation:1. Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China; 2. Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University, Shanghai, 200092,China; 3. Shanghai Construction(Group) General Co., Ltd., Shanghai 200080, China
Abstract:The post grouting technology is used to format the screws of a grouting screw pile, which can be constructed easily in soft clay area and has been applied to engineering project currently. According to the stress change of soils around the screws in the uplift process of the grouting screw pile, the Mohr circle stress analysis is conducted to analyze the development of slip line along the screw; and it can also give the relationship between the angle of slip line and the ratio of screw pitch to screw dimensions,which is expressed in the mathematical equation of incremental normal stress and shear stress of soil around the screws. The condition to judge the shape change of slip line between the screws from cylinder to truncated cone is obtained. Based on the shape of slip line, the calculation of uplift capacity of screw pile can be divided into three cases, the formula of which is obtained through limit equilibrium method. The application and rationality of the presented method is proved by comparison with finite element analysis and a field test.
Keywords:screwed pile  uplift capacity  Mohr stress circle  slip face  
本文献已被 CNKI 等数据库收录!
点击此处可从《岩土力学》浏览原始摘要信息
点击此处可从《岩土力学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号