首页 | 本学科首页   官方微博 | 高级检索  
     

积温数据栅格化方法的实验
引用本文:廖顺宝,李泽辉. 积温数据栅格化方法的实验[J]. 地理研究, 2004, 23(5): 633-640. DOI: 10.11821/yj2004050007
作者姓名:廖顺宝  李泽辉
作者单位:中国科学院地理科学与资源研究所,北京100101
基金项目:国家科技基础性工作专项资金课题 (2 0 0 1DEA30 0 2 7 9),中国科学院知识创新工程项目 (INF10 5 SDB 1 18)
摘    要:根据中国 4 0 0多个气象站 1995年的积温数据分析 ,≥ 0℃积温和≥ 10℃积温与经纬度、海拔高度的相关性分别为r2 =0 96 5 6和r2 =0 94 0 2。以≥ 0℃积温数据为例 ,利用聚类分析法 ,将全国分为 7个积温计算区 ,每个区分别构建模型 ,通过“回归方程计算 +空间残差”的方法对全国积温数据进行栅格化。验证结果为 :计算值与实测值之间的线性相关系数r2 =0 9889,平均相对误差 3 5 6 % ,相对误差在 5 %以内的气象站个数占验证气象站总数的 86 %。

关 键 词:积温  数据  栅格化  方法  
文章编号:1000-0585(2004)05-0633-08
收稿时间:2004-02-28
修稿时间:2004-02-08

Study on methodology for rasterizing accumulated temperature data
LIAO Shun-bao,LI Ze-hui. Study on methodology for rasterizing accumulated temperature data[J]. Geographical Research, 2004, 23(5): 633-640. DOI: 10.11821/yj2004050007
Authors:LIAO Shun-bao  LI Ze-hui
Affiliation:Institute of Geographic Sciences and Natural Resources Research, CAS, Beijing 100101,China
Abstract:Accumulated temperature is an important heat resource and one of the key factors for crop growth. Accumulated temperature is of significance in guiding agricultural production. Usually, accumulated temperature data from meteorological stations can only reflect heat regimes of areas close to meteorological stations. In areas far from meteorological stations, it is by interpolation that accumulated temperature can be calculated. Rasterizing is one of the means for interpolating accumulated temperature data. Accumulated temperature is influenced by longitude, latitude and altitude to a great extent. There is a close linear relationship between accumulated temperature and longitude, latitude and altitude. By analyzing data from more than four hundred national meteorological stations in China, it was found that the ≥0℃ accumulated temperature and ≥10℃ accumulated temperature in 1995 had correlation coefficients of r 2= 0.9656 and r 2= 0.9402 with longitude, latitude and altitude respectively. In order to explore ways to process rasterized accumulated temperature data products, the ≥0℃ accumulated temperature was taken as an example. China was divided into seven different accumulated temperature regions by means of cluster analysis, seven models suitable for each region were established respectively, and the method of "model based computation result plus spatialized residues "was used to rasterize accumulated temperature data in China. Data from 436 of 481 meteorological stations were used to establish rasterizing models, and accumulated temperature data in whole China were calculated. 45 meteorological stations, which were distributed countrywide evenly and were not used to establish the models and to calculate accumulated temperature, were selected to test and verify precision of the rasterizing method. The result showed that there was a close relationship of r 2 = 0.9889 between actual observed accumulated temperatures and calculated temperature by rasterizing with mean relative deviation equal to 3.56%, and the meteorological stations with deviation less than 5% occupied 86% of the total meteorological stations used for testing and verifying. It was demonstrated that the rasterizing method used in the study is more accurate and it can be used for rasterizing of accumulated temperature data at large scale.
Keywords:accumulated temperature  data  rasterizing  method
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《地理研究》浏览原始摘要信息
点击此处可从《地理研究》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号