Heat transfer and thermal boundary layers in high amplitude annulus waves |
| |
Authors: | Jack A C Kaiser |
| |
Institution: | 1. Hydrodynamics Laboratory, The University of Chicago , Chicago, Illinois, 60637, U.S.A.;2. Naval Research Laboratories, , Washington, D.C., 20390 |
| |
Abstract: | AbstractThe heat transfer by a rotating, differentially-heated annulus of fluid is measured throughout the high amplitude wave regime. Only Δrw T was varied (although v(T15 ).K(T15 ) varied by 46%), and it is found that Nu = C1(λ)Ra? away from the symmetry and low amplitude to wave transition curves and this is independent of ω. (λ is the wavelength.) On the wave side of these transition curves a region exists in which Nu (symmetry) λ Nu λ C1(λ)Ra?. The local heat transfer rate also varies strongly with wave phase.Using a selection of measured internal thermal fields in the steady, high amplitude wave regime, the side-wall thermal boundary layer structure is examined. It is found that Nu, = C2·Gr2 A2; both C 2 and A 2 are independent of ω and λ to first order. For the time mean profiles, A 2 ≈ 0.25; in the high heat transfer portion of the wave A 2 < ¼ and in the low heat transfer portion of the wave A 2 > ?. These relations hold over most of the vertical extent of the side walls. The deviations of the boundary layers from the above behavior which occur on the remainder of the walls is illustrated. The average thicknesses of the wall boundary layers ∞ Ra?¼ except in that phase of the wave in which the wall to mid-gap temperature difference is the largest. |
| |
Keywords: | |
|
|