Mineralogical controls on environmental mobility of arsenic from historic mine processing residues,New Zealand

Processing of arsenopyrite ore took place at Blackwater Au mine, New Zealand, between 1908 and 1951 and no rehabilitation was undertaken after mine closure. High As concentrations in solid processing residues (up to 40 wt% As) are due to secondary As minerals. Site pH regimes vary from 4.1 to circum-neutral. Originally, all processed As was present as arsenolite (arsenic trioxide polymorph, As^III), a by-product of arsenopyrite roasting. Near the roaster, scorodite precipitated as a result of the high dissolved As concentration during arsenolite dissolution. The formation of scorodite has two major consequences. Firstly, the scorodite precipitate cements the ground in the vicinity of the roaster area, thereby creating an impermeable surface crust (up to 30 wt% As) and encapsulating weathered arsenolite grains within the cement. Secondly, formation of scorodite temporarily immobilizes some of the dissolved As that is generated during nearby arsenolite dissolution. Where all the available arsenolite has dissolved, scorodite becomes soluble, and the dissolved As concentrations are controlled by scorodite solubility, which is at least two orders of magnitudes lower than arsenolite solubility. Downstream Eh conditions fall below the As^V/As^III boundary, so that scorodite does not precipitate and dissolved As concentrations are controlled by arsenolite solubility. Dissolved As reaches up to 52 mg/L in places, and exceeds the current WHO drinking water guideline of 0.01 mg/L by 5200 times. This study shows that dissolved As concentrations in discharge waters at historic mine sites are dependent on the processing technology and associated mineralogy.