Orographical modification and large scale forcing of a cold front

Summary The development of a cold front influenced by orography and large scale forcing is examined with a two-dimensional meso-scale model. The model is based on the primitive equations and uses the hydrostatic and anelastic approximations. Gradients of the basic flow and temperature field in the third dimension are taken into account during the simulations. Low diffusive numerical schemes and radiation boundary conditions reduce the numerical errors to an acceptable minimum for a two day simulation and avoid reflections at the upper and lateral boundaries. Frontogenetical forcing is included in the simulations by specifying either a vertically sheared or horizontally convergent basic zonal flow field. Model runs with an idealized cold front were carried out over flat terrain and in the presence of a bell shaped mountain ridge.The simulations show a weakening of the cold front on the windward side of the mountain ridge and a strong reintensification on the leeward side relative to the control runs without topography. Analysis of frontogenesis terms demonstrates the importance of convergence in the ageostrophic circulation and of along-front temperature advection for the development of the cold front. The strong intensification of the cold front on the leeward side of the mountain ridge can only partly be explained by superposition with the mountain induced wave. It is mainly caused by ageostrophic deformation forcing in the strong downward flow of this wave.The results also show that the cold front passage over the mountain ridge is not a continuous process. The formation of a new frontal structure on the leeward side of the mountain ridge, well separated from the primary one, is observed while the initial cold front still exists in the upslope region. Generally nonlinear interactions between the mountain wave and the cold front are the important mechanisms to explain these phenomena.With 18 Figures